Bosch

• Only for one tapping point
  
• Under-table installation
  
• Plastic inner container
  

• Application: For sawing steel tubes and profiles
  
• Cutting length (mm): 130 / 205
  
• Consisting of:
  - 5 x S 922 EF for metal (thin sheet metals (1,5-4 mm), pipes/profiles (ø <100 mm)
  - ?10 x S 1122 EF (thin sheets (1.5-4 mm)), ?tubes/profiles (ø <175 mm)
  

• Screwdriver bits are made from heat-treated, S2-modified steel for hardness and wear resistance
  
• Bits in the set are colour-coded to make it easier for you to find the right one
  Consisting of:
  
• Slotted: 3/4/5/6, 25 mm, 6, 75 mm
  

• Area of application: For drilling holes in alloyed and unalloyed steel with self-centring cross-ground drill point
  Consisting of:
  
• Drills HSS-G-ø (mm): 2.5/3/3.5/4/5/6
  - Shank: 6.3 mm (1/4") hexagon
  
• Slotted: 3/4/5/6, 25 mm
  

• Area of application: Softwood, drywall, plastics, metal, non-ferrous metals
  
• Mounting: PowerChange/PowerChange Plus (Adapter must be ordered separately)
  
• Design: with 8% cobalt alloy
  

- Material to be cut: Thin sheets (1.5-4 mm), pipes/profiles (ø ...

- Material to be cut: Thick sheet metal (3-8 mm), solid pipes/profiles (ø ...

- Application: Masonry, concrete and reinforced concrete- Shank: SDS-Plus- Design: 4-cutter with solid carbide head ...

• Material: for cutting high-strength steels and tubes/profiles with wall thickness 4-12 mm
  
• Application: straight metal cuts
  
• Tooth pitch (mm): 3
  

ProCORE / ProCORE+:- More power thanks to the latest cell technology and intelligent battery management- Longer service life: COOLPACK 2.0 technology prevents the Batteries from overheating- 100% compatible with all existing and new Bosch 18 V Power tools and Chargers* Only applies to items of the P ...

- Material to be cut: Thick sheets (3-8 mm), solid pipes/profiles (ø ...

• Material to be cut: thin sheet metals (1.5-4 mm), pipes/profiles (ø <175 mm)
  
• Application: flush cutting in metals
  
• Tooth pitch (mm): 1.4
  

• Material to be cut: Steel, pipes and profiles made of metal, cast iron and non-ferrous metals
  
• Inner hole ø: 22.23 mm
  
• Aluminium oxide disc for common metal work
  

• Suitable for Bosch: GC7000F/iF 15-50, KBRC 22-50/1
  
• Ref. no.: 7 736 604 314
  
• Scope of delivery:
  - Ignition/ionisation electrodes
  - Seal sets
  - Fastening accessories

• Torque (Nm) max.: 63
  
• Torque pre-selection: Yes
  
• Brushless motor: Yes
  

• Mounting: STARLOCK
  
• Starlock Set Best of Cutting contains a selection of blades for all applications with wood and metal for all cutting jobs with a longer service life
  
• Bi-metal blade: combines hard teeth with a flexible blade body
  

• Material to be cut: Cast iron, fibre-reinforced plastics GRP, CFRP
  
• Application:for cuts in pipes
  
• Tooth pitch (mm): Grit 50
  

• For one or more tapping points
  
• Electronically controlled
  
• Air bubble detection
  

• Area of application: Can be used for drilling holes in wood, drywall, building blocks, plastics, metals, non-ferrous metals, stainless steel, abrasive materials and soft tiles
  
• Design: Carbide with 20 times longer service life
  
• Consisting of:
  - PowerChange/PowerChange Plus adapter with hexagon socket 11 mm
  - Centring drill ø 7.15 mm, 8.5 mm carbide tip, length 105 mm, with hexagon holder 6.35 mm (1/4") (84 019 18)
  - Centring drill ø 7.15 mm, length 105 mm, with hexagon holder 6.35 mm (1/4") (84 019 17)
  - Hole saw dia. (mm): 20, 22, 25, 32, 35, 40, 44, 51, 60, 68, 76, length 60 mm

• For one tapping point
  
• Electronically controlled
  
• Under-sink installation
  

• Output (watts): 1150
  
• Idle speed (rpm): 170-340
  
• Stroke rate (rpm): 1500-3050
  

• Cordless drill/screwdrivers, 18 V
  
• Torque (Nm) max.: 63
  
• Torque pre-selection: Yes
  

• Cordless impact screwdriver, 18 V
  
• Torque (Nm) max.: 56
  
• Idle speed (min-1): 0-440/1650
  

• Battery capacity (Ah): 2.0 - 12.0
  
• Air flow (l/min): 2040
  
• Vacuum (mbar/kPa): 115 / 11.5