GOK
- According to DIN 3870
- With O-ring seal for cutting ring fittings in accordance with DIN 2353 / DIN EN 8434-1
- Series L
- Hose breakage protection devices prevent excess gas from escaping in the event of damage or hose loosening and close up the passage of gas as soon as the prescribed operating quantity is exceeded max. 10% above the nominal flow rate.
Fitted between controller and hose. Commercial for hoses >400 mm and private >1500 mm. Exclusively for outdoor use.
A small amount of gas provides pressure equalisation, causing the hose breakage protection to
open automatically. - Nominal flow rate: 1.5 kg/h
- DN 8 (G ¼) LH union nut x DN 8 (G ¼) LH-KN
- Suitable for model VTK
- With spacer and measuring cable
- For tank connection: DN 25 (1”)
- Two-stage oil filter
- Ready to connect 20 l BW canister
- Display device for indoors and outdoor areas that are protected from the weather
- Protection type: IP 54
- For local content measurement of depressurised oil tanks
- Universal high-performance handle, with internal adjustment of the pilot flame, with control and torque handle valve, DIN-DVGW-tested, connection for inserts M 20 x 1 hose connection DN 10 (3/8") LH-KN
- Connection pipe 600 mm
- High-performance burner head 50 mm
- Made of brass
- For screwing into the burner pump
- IT on one side, DN 6 (1/8”) ET on the other
- Output: 2 x 1.6 KW
- Operating pressure: 50 mbar
- With ignition fuse and lid
- Consists of monitoring unit and sensor
If fluid (heating oil EL, diesel fuel, biodiesel, lubricating oils, water) wets the tube resistor sensor, the monitoring device raises the alarm with an LED - At the same time, a floating contact is connected that disconnects the socket
- Power supply: AC 230 V / 50 Hz
- For connection to gas cylinders, for pressure regulation based on nominal pressure of the gas appliance
- Set for the connection of a mobile interior heating device - Consisting of:
- Low pressure controller type EN61-DS 1.5 kg/h 50 mbar
- Medium pressure hose line KLF x G DN8 (¼“) LH-union nut 400 mm
- MiniTool (53 001 71) - Conformity:
- Individual fittings DIN-DVGW or DVGW tested, EC type examination
- For connection to gas cylinders (5.11 kg), for pressure regulation to the nominal pressure of the gas appliance
- Removal from both sides, cylinders can be changed without interrupting operation
- Pressure gauge for checking the system for leaks
- - For connection to gas cylinders, for operating gas barbecues with a gas cartridge connection.
- Consisting of:
- Medium pressure regulator type M50-F/SBS, 2 kg/h, 2.0 bar with outlet 35° and integrated hose rupture protection EFV (SBS)
- Medium pressure hose (rubber with textile insert, resistant to cold down to -30 °C, hose dimensions 6.3 x 3.5 mm) G DN10(3/8“) LH union nut x plug coupling SKU
- Transition piece with, on the one hand, plug nipple STN for easy detachment of the hose line, on the other hand, ET 7/16-28 UNEF or ET 1-20 UNEF for connection to the
Gas unit
- TV = T-screw connection
- Galvanised
- With brass cutting ring
- DN 10 (3/8") ET cylindrical with inner cone
- For the stress-free connection of fittings to consumer appliances or pipelines
- Maximum permissible pressure: PS 1 bar
- DN 8 (1/4") LH union nut x IG RP DN 15 (1/2")
- Professional filter air vent system in compact form:
- Guaranteed to keep odours in, no further accessories required
- No oil or oil foam can escape
- For quick connection of pipelines with hose lines
- With integrated overpressure safety device (OSD) for protection
- Viewing display (green/red) with visual signal (red) in the event of output pressures over 80 mbar
- PS 16
Connections:
- Display device for indoors and outdoor areas that are protected from the weather
- 2 relays with NC and NO contact max. 250 V AC, 3.5 A
- Protection type: IP 54
- With safety shut-off valve OPSO (SAV) for connection
to LPG bottles 33 kg - With safety blow-off valve PRV
- With testing connection
- Connection RVS 18 mm, DN 20 PS 16 bar
- Surface mounting
- Consisting of: Insulating piece, main shut-off valve, test connection, hot-dip galvanised protection box (H x W x T: 328 x 210 x 125 mm)
- Permissible max. pressure: 16 bar
- According to EN 14420-6
- Made of aluminium
- For liquid gas pipes to determine the pipe diameter in conjunction with the pipe length and output
- Made of plastic
Note: - Only suitable for measuring pipes without a gas flow monitor
- Material: hot-dip galvanised sheet steel
- Lockable: square lock including square keys
- Suitable for all 33 kg gas bottles