GOK
70 075 01
Bleeder fitting EMA without pressure gauge
Immediately available
- For screwing into the burner pump
- Simultaneous oil burner pump pressure measurement/vacuum measurement/ventilation
- With shut-off, manometer DN6 (1/8”)
32 041 18
Leak warning device type LGW 2000
Immediately available
- Incl. tube resistor for flexible installation
- For tanks, boiler rooms, collection trays
- Electrical connection: 230 V/50-60 Hz, IP 30
Multiple variants
Heating oil junction supply fitting
Immediately available
- Two-stage oil filter
- Ready to connect 20 l BW canister
Multiple variants
Two flame cooker
Immediately available
- Output: 2 x 1.6 KW
- Operating pressure: 50 mbar
- With ignition fuse and lid
Multiple variants
Gunmetal press union PRV
Immediately available
- With V/SV contour
- As a junction to cutting-ring connection
Multiple variants
Low pressure controller
Immediately available
- For direct connection to liquid gas bottles up to 11 kg
- PN 16
- Output 1.5 kg/h fixed
32 000 50
Tank level indicator digital GOK type Smartbox 2 incl. probe
Immediately available
- Display device for indoors and outdoor areas that are protected from the weather
- 2 relays with NC and NO contact max. 250 V AC, 3.5 A
- Protection type: IP 54
Multiple variants
Medium pressure controller PS 16 bar
Immediately available
- For connection to gas cylinders,
for pressure regulation based on nominal pressure of the gas appliance - Hose breakage protection EFV CSBS with manual opening,
shuts off gas supply in the event of hose damage - Combi-connection for optional connection to 5, 11 or 33 kg gas cylinders
32 072 52
Probe for LC1 and LC2 level gauge
Currently not in stock - Time of delivery: approx. 2-4 weeks
- Level sensor 0 to 250 mbar with 6 m cable
Multiple variants
Meter brackets
Immediately available
- For liquid gas systems to connect a single-pipe gas meter DN 25 (1”)
- Connection rotatable through 180°
- Meter connection: ET 2 RH flat sealing, with sealing hole,
pipe connection with pipe screw connection in 18 mm
53 039 52
Holder for 1 spigot gas meter G2.5 - G4 - G6 2" x RVS 18, 180° rotatable"
Immediately available
- For liquid gas systems to connect a single-pipe gas meter DN 25 (1”)
- Connection rotatable through 180°
- Meter connection: ET 2 RH flat sealing, with sealing hole,
pipe connection with pipe screw connection in 18 mm
Multiple variants
GOK cylinder system with OPSO/UPSO, type MUV, with manual changeover unit
Only a few items left in stock
- For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
- Also suitable for commercial use
- Cylinders can be changed without interrupting operation
Multiple variants
Accesories for Gas bottle cabinets
Delivery item
Multiple variants
Oil pressure controller ODRE-M
Immediately available
- DIN tested up to 180 l/h
- With manometer
- The operating pressure can be adjusted in such a way that an output pressure ranging between 0 bar and 2.5 bar is ensured in the event of any input pressures up to 10 bar
Multiple variants
WSV = Angular bulkhead screw connection
Immediately available
- Material: steel
- For Cu pipes
- Series L
Multiple variants
RSV = Straight bulkhead screw connection
Immediately available
- Material: steel
- For Cu pipes
- Series L
Multiple variants
Compression ring coupling
Immediately available
- SK = Special coupling,
External thread, loose union nut on the other side - According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
- Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
rings; mineral oil is suitable for lubrication during assembly.
Multiple variants
Low-pressure controller EN 61
Immediately available
- Non-adjustable
- For connection to liquid gas cylinders up to 14 kg
- On outlet side, 2 or 3 outlets
Multiple variants
Compression ring coupling
Immediately available
- WAV = Elbow screw-on connection
- Galvanised
- With brass cutting ring
Multiple variants
Leakproof plug housing AS-2
Immediately available
- Consists of monitoring unit and sensor
If fluid (heating oil EL, diesel fuel, biodiesel, lubricating oils, water) wets the tube resistor sensor, the monitoring device raises the alarm with an LED - At the same time, a floating contact is connected that disconnects the socket
- Power supply: AC 230 V / 50 Hz
31 018 06
Fastening clip for oil alarm sensor
Immediately available
- Consists of monitoring unit and sensor
If fluid (heating oil EL, diesel fuel, biodiesel, lubricating oils, water) wets the tube resistor sensor, the monitoring device raises the alarm with an LED - At the same time, a floating contact is connected that disconnects the socket
- Power supply: AC 230 V / 50 Hz
Multiple variants
Compression ring coupling
Immediately available
- reduced elbow,
galvanized, with brass olive. - According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
- Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
rings; mineral oil is suitable for lubrication during assembly.
31 018 04
Heating oil alarm type HMS, TÜV tested with probe 2m long
Immediately available
- Consists of monitoring unit and sensor
If fluid (heating oil EL, diesel fuel, biodiesel, lubricating oils, water) wets the tube resistor sensor, the monitoring device raises the alarm with an LED - At the same time, a floating contact is connected that disconnects the socket
- Power supply: AC 230 V / 50 Hz
Multiple variants
Compression ring coupling
Immediately available
- Tee reduced,
galvanized, with brass olive. - According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
- Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
rings; mineral oil is suitable for lubrication during assembly.