Tool storage

• With removable Tool bags
  
• Capacity: 20 litres
  
• Bucket dimensions (ø x H): 300 x 385 mm
  

• With removable Tool bags
  
• Without contents
  
• Capacity: 20 litres
  

• Material: PP (polypropylene)
  
• Euronorm standard
  
• Stackable
  

• Can be used universally e.g. as protective packaging for tools and measuring devices
  
• Stable design due to surrounding beads
  
• Can be stacked
  

• Material: plastic
  
• Contents not included

• The tool belt can be used to carry tools and working materials directly on your person. The integrated padding and sturdy construction make the tool belt back-friendly and comfortable to wear on the hip. The ProClick holder can be clamped to the belt strap flexibly allowing tool bags to be changed quickly by simply clicking them in and releasing them again. The belt also makes work easy with its sorting system and quick accessibility, even when working overhead on a ladder or scaffolding. This saves climbing up and down, which is important for both safety and time.
  
• Reflective safety stripes
  
• For carrying tools on your person
  

• Organisation aid for small parts and tools
  
• Suitable for i-BOXX®72 and drawers 72
  
• Made of deep-drawn plastic

• Material: plastic

- Without content ...

• Material: ABS plastic
  
• Without contents

• Material: PP (polypropylene)
  
• Hinges and fasteners included

• Material: PP (polypropylene)
  
• Euronorm standard
  
• Stackable
  

• Material: ABS plastic/PMMA
  
• 1 document compartment in the lid with 1 business card pocket and 2 pen loops
  
• 1 clamp compartment for e.g. tablet PCs with Velcro fastener
  

• Dimensions (mm): 330 x 355 x 115 mm
  
• 1 x shoulder strap, with movable wide padding, adjustable length, detachable. Dimensions (mm): 38 x 1470 mm
  
• 1 x removable holder with carrying handle and variable hook and loop divider to divide into up to 5 internal compartments. Dimensions (mm): 165 x 165 x 105 mm
  

• Protects the box and the material against damage during transport

• 37-piece
  consisting of:
  
• WS L-BOXX® 102 + inset boxes + cover inlay
  
• 3 x double ignition electrode for BE/A
  

84-piececonsisting of:- WS L-BOXX® 306 + cover inlay + WS i-BOXX® 72 + small partial insert and WS drawer 72i-BOXX®- 1 x IRD 1010- 1 x connection cable for IRD- 1 x QRB photoresistor- 2 x FZ 770S photoresistor- 2 x connection cable for FZ 770S- 2 x adapter for FZ 770S- 6 x pump coupling- 2 x Bude ...

• 29-piece
  consisting of:
  
• WS L-BOXX® 102 + inset boxes + cover inlay
  
• 2 x double ignition electrode for Unit oil burners to constr. yr. 92
  

29-piece setconsisting of:- WS L-BOXX® 102 + inset boxes + lid insertFor oil burners- 1 x double ignition electrode for WL10 up to approx. 88- 1 x double ignition electrode for WL 5/10/20- 1 x double ignition electrode for WL 10/1 LN- 1 x ignition cable set for WL10/20- 1 x ignition cable set for W ...

• Consisting of:
  
• WS L-Boxx® 136
  
• Smart part set L136
  

• Material: nylon, water-repellent
  
• With carrying strap
  
• With pockets inside
  

• 21-piece
  
• For annual functional testing of all standard backflow preventers BA and CA as per DIN 1717
  
• Rotatable connections which allow differential pressure gauge to remain in the box during measurement
  consisting of:
  WS L-BOXX® 136 + pre-cut foam + cover inlay
  1 x differential pressure gauge 0-1 bar (overload capacity up to 25 bar)
  1 x pressure gauge 0-10 bar with plug-in sleeve
  3 x test valve with plug nipple ET DN 8 (1/4”)
  3 x test valve with plug nipple ET DN 15 (1/2”)
  1 x test valve with plug nipple IT DN 25 (3/4”)
  3 x plug nipple ET DN 15 (1/2”)
  3 x plug nipple ET DN 8 (1/4”)
  2 x pressure hose (1 m) with 2 plug-in sleeves
  2 x relief hose (0.5 m) with one plug-in sleeve
  1 x block maintenance stickers (50 pieces)
  1 x instruction manual
  In order to protect the public drinking water supply, tapping points must be safeguarded with a system separator.
  The system separator must be checked annually to ensure that it is functioning properly.
  This check can easily be combined with the annual heating service and can be completed in just a few minutes.
  This test kit designed for the service engineer should be part of the equipment carried by any service vehicle.

• For belts up to 50 mm wide
  
• Metal clip for belt attachment

• Additional small pocket for grindstone or sharpening tool

• Specially designed for trainees and fitters in the plumbing and heating industry
  
• Set with premium branded items
  Consisting of:
  
• Professional tool box with tray insert and 2x small components organiser in the lid
  

• Dimensions (H x W x D): 210 x 535 x 225 mm
  
• Weight (kg): 18.5
  Consisting of:
  
• 1/2" 2C reversible ratchet, 270 mm
  

• Made from ABS plastic
  
• All-round aluminium frame
  
• Lockable metal locks
  

• Made from ABS material
  
• All-round aluminium frame
  
• Lockable metal locks
  

• Made from ABS material
  
• All-round aluminium frame
  
• Lockable metal locks
  

• Made from ABS material
  
• All-round aluminium frame
  
• Lockable metal locks
  

• Made from ABS material
  
• All-round aluminium frame
  
• Lockable metal locks
  

• Genuine leather belt with robust double holes
  
• Stabilising padding in the lower back area for balanced weight distribution, stable support and maximum wearing comfort
  
• Inside of padding perforated for optimal air circulation