Equipment
- 1-component sealant based on hybrid polymer SMP
- Mould-resistant (microorganisms DIN ISO 846)
- Very good primerless adhesion to numerous substrates, even when exposed to water
- Disinfects and removes mould, green and algae infestation from indoor and outdoor surfaces
- Suitable for floors in sanitary areas and on mineral substrates such as brick, concrete, plaster, facades and gravestones
- Not suitable for fabrics, metals and green plants as the product contains chlorine (risk of bleaching)
- For the substrate treatment of mould, green and algae-infested surfaces before subsequent coats of paint. Can be used both indoors and outdoors
- Permanent destruction of residual spores in the substrate of mould, green and algae coatings
- Aqueous solution = penetrates deep into the substrate
- Dissolves spray paints, colours and felt-tip pens, making them easy to remove
- Infiltrates all solvent-resistant substrates, such as metal, glass, wood, tiles, unpainted concrete, clinker, natural stone and artificial stone
- Short exposure time, biodegradable
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable by saponifying the surface. Also suitable for removing wax from wall surfaces.
- High roughening effect, therefore no sanding required!
- Mixing ratio: 100 g to 1 litre of water
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable through surface saponification. Particularly suitable for subsequent water-based Coatings & paint systems.
- Degreasing, high surface saponification
- High roughening effect, therefore no sanding required!
- Removes all paint stains, emulsion paints, Coatings and oil paints from all solvent-resistant surfaces such as masonry, wood, glass and textile floors, even if they are already completely dry. For plastic surfaces and painted surfaces, compatibility must be checked on an inconspicuous area.
- No solvent regeneration, therefore can also be used on Work clothing and textile floors.
- Application ratio: undiluted
- For lightening and removing discolouration from all types of wood. Old and blackened wood becomes like new again and regains its natural colour. Lye residues (e.g. from paint strippers etc.) can be neutralised with this product. Removes sweat marks in the sauna.
- Fungicidal (fungicidal) property
- Preparation ratio: Dissolve 100 g in 800-1000 ml (warm) water
- For Cleaning and removing limescale and cement residues, inorganic soiling and flash rust, also in combination with oily and greasy soiling. For Cleaning acid-resistant substrates such as wall and floor tiles, brick and clinker surfaces, porcelain stoneware in sanitary facilities, swimming pools, kitchens, car washes, clinker facades. Check compatibility when used on Bath fittings.
- Degreasing, strong protective solvent
- Application ratio: depending on soiling, dissolve 1:1 to 1:15 with water
- Removes efflorescence (saltpetre etc.) on natural stone, clinker, brick, concrete and plaster. Covers acid-sensitive surfaces (e.g. marble, artificial stone)
- Application ratio: apply undiluted
- Consumption: 120-150 ml/m²
Remove loose layers and dry brush off heavy efflorescence. Spray onto the efflorescence or apply with a Sponges or ceiling brush. After a reaction time of 10-15 minutes, rinse with clear water.
- As a solvent-free coating to protect all wallpapers, wall paints and natural stone. Only suitable for indoor use. Makes all wallpapers, emulsion paints etc. washable and scrub-resistant. Wallpaper protection dries matt. Breathability is slightly restricted.
- Matt gloss level, does not yellow (lightfast)
- Application ratio: undiluted
- Removes all woodchip wallpaper even without the use of a spiked roller, sandpaper, etc.
- Suitable for removing multi-coated wallpapers and wallpapers that are difficult to remove, such as textile and vinyl wallpapers
- Extremely high removal power, no run-off on the wallpaper
- For removing old paints and coatings on solvent-resistant substrates such as wood, plaster surfaces, metals, concrete, etc. Also for removing glazes (especially thin-layer glazes). Can also be used for old coatings and special 2K Coatings.
- Short exposure time, no Covers required
- Pasty, therefore also easy to use on vertical surfaces
- Emulsifies Coatings, emulsion paints, Greases and Oils. As a paint remover: Spray on paint stains on solvent-resistant substrates (e.g. mineral substrates, wood, ceramics, glass, etc.) or cover with a damp cloth and leave to work. Then remove the dissolved colour. Not suitable for painted or varnished surfaces.
Biodegradable - Biodegradable
- Application ratio: undiluted
- Insulates and neutralises substrates containing lime and cement. Prevents the penetration of water, alkalis and acids. Isolates stains from water marks, smoke, soot and nicotine stains. Strengthens old and new plaster. Against efflorescence on masonry and plaster, combats mould growth and dry rot. Neutralisation of active lime and cement plaster (important for dispersion coatings to prevent colour changes, especially with silicate coatings).
- Combination of fluate salts = wide range of applications = Insulating, impregnating and priming
- Biodegradable
- Biodegradable cleaning concentrate for all washable surfaces
- Cleans heavy and difficult to remove soiling of all kinds without etching and thus preserves the natural shine of the surface
- Removes all soiling and has a 100% degreasing effect
- Full-surface self-adhesive LDPE film for masking glass surfaces indoors and outdoors against mechanical stress and soiling
- Type of adhesive: acrylate
- Adhesion/UV resistance indoors+outdoors: 30 days
- Adheres securely to smooth surfaces and ensures a smooth tread
- Sealing film top side reliably blocks out moisture, paint and Adhesives
- The self-adhesive fleece underside absorbs shocks and protects sensitive coverings such as parquet, natural stone or tiles. Edges remain smooth, sheets lie flat - even with material traffic
- Adheres securely to smooth surfaces and ensures a smooth tread
- Sealing film top side reliably blocks out moisture, paint and Adhesives
- The self-adhesive fleece underside absorbs shocks and protects sensitive coverings such as parquet, natural stone or tiles. Edges remain smooth, sheets lie flat - even with material traffic
- Transportable home refuelling station for installation in rooms and buildings
- For diesel, EL/L heating oil, radiator antifreeze (undiluted)
- Double-walled Schütz 1000 l tank, HDPE inner container with galvanised sheet metal jacket as collection tray
- Material: nylon, water-repellent
- With carrying strap
- With pockets inside
- Suitable for common household fires, e.g. grease, wood, paper, household waste +F40:F47
- Not suitable as a replacement for an EN3-compliant Fire extinguishers
- Contents: PFAS-free water-based aerosol, non-toxic, easy to wash off
- Adheres securely to smooth surfaces
- The fleece top side absorbs paint splashes, plaster residue and water, while the Sealing, self-adhesive film underside blocks downwards. This keeps the substrate dry and intact
- Reusable, free of harmful substances, thermally recyclable
- Power (W): 350-1200
- Vacuum pressure (mbar/kPa): 240/24
- Tank capacity (litres): 15
- Against mould and bacteria for 100% fungicidal (fungicidal) treatment of all water-dilutable paints, including Coatings, dispersions, facade paints, synthetic resin plasters, etc. and as a mould-preventative agent in wallpaper paste
- Suitable for food processing companies
- Fungicidal (fungicidal) property
- Preferred areas of application are bathrooms, kitchens, window (construction), tiles, expansion joints, etc. The silicone grout remover can be used to easily remove silicone grout residue from glass, ceramics, metals and numerous plastics such as plastic bathtubs and shower trays
- Pasty, therefore also easy to use on vertical surfaces
- Application ratio: undiluted
- Consisting of:
- 2 x telescopic Work trestles, MB 160 H foldable
- Steel square tube
- Foldable
- Locking hooks to prevent the worktop from slipping sideways (max. 640 mm wide)
- Load capacity: 160 kg
- Height adjustable: 820 - 1300 mm
- Dimensions (H x W): 1300 x 680 mm
- Weight: 7.5 kg
- GS-tested safety
- Complies with the standards BGR 234 and DIN EN 15635
- If the shelf height is more than four times the shelf depth, the Shelf units must be secured against tipping over, e.g. by wall mounting or floor anchors
- GS-tested safety
- Complies with the standards BGR 234 and DIN EN 15635
- If the shelf height is more than four times the shelf depth, the Shelf units must be secured against tipping over, e.g. by wall mounting or floor anchors
- With belt loop and snap hook
- Material: polyester, hard-wearing
- Dimensions (L x W x D) mm: 190 x 80 x 75
- Closure with zip fastener
- Material: polyester, hard shell
- Dimensions (L x W x D) mm: 195 x 90 x 64
- With drawstring fastening
- Material: microfibre cloth
- Dimensions (L x W) mm: 190 x 100
- Adjustable in length
- Material: polyester
- Length mm: 560
- Reusable, with zip fastener on both sides
- Material: polypropylene fabric, washable, UV-resistant, water and tear-resistant
- Grammage: 80 g/m²
- Reusable, with zip on both sides
- Material: polypropylene fleece, permeable to air
- Grammage: 70 g/m²
- Reusable, with zip on both sides
- Material: 100% polyester fabric, flame-retardant PU coating
- Highly tear-resistant, waterproof, UV-resistant, washable