Replacement parts - Manufacturer A to Z

• Suitable for OERTLI: PKR 340 Condens
  
• Material: Silicones/glass fibre
  
• Dimensions: ø 10 x 5000 mm
  

• Red chrome-plated
  
• Ref. no.: 148.41 Z 346

• Chrome-plated, blue
  
• Ref. no.: 148.41 Z 345

• Suitable for MHG: ProCon Streamline
  
• Dimensions: 275 x 297 x 3 mm
  
• Ref. no.: 96.34487-7210

• Suitable for MHG: GWB 15/25/28/45
  
• Incl. seals and plugs
  
• Ref. no.: 96.36400-7008

Suitable for elco: SMARTRON® ZEM2-13C up to ZEM5-25C, SMARTRON® ZEM5-25SEPModel: Sigma 848Ref. no.: 65000742 ...

• Suitable for Hansa: HM, HMV, HMG E-DU
  
• Dimensions: 150 x 150 x Ø 80 mm
  
• Ref. no.: 1001724 replaces 1676

• Suitable for Hansa: HVS 8.1A, HVS 8.2Z
  
• Dimensions: 152 x 152 x Ø 90 mm
  
• Ref. no.: 1000879 replaces 1072

• Suitable for Hansa: HS 14/20
  
• Isolator: 25 x 40 mm
  
• Wire ø: 1.7 mm
  

• Suitable for elco: CB-VB2.66-100VD
  
• Insulator: 7 x 80 mm
  
• Wire Ø: 3.5 mm
  

• Suitable for Hansa: HM, HMV, HMG E-DU
  
• Power: 70 W
  
• Voltage: 230 V/50 Hz
  

• Suitable for loading valve unit ACGE

• Suitable for thermostats and shower panels
  
• DN 15 (1/2“)
  
• Ref. no.: 92605000

• for weather-compensated Controls
  
• Easy assembly and disassembly thanks to PAW snap-in technology (with mounting kit for snap-in mounting on the PAW Mixers)
  
• Changeover switch for manual/automatic operation
  

• Not fail-safe
  
• No probe, no control unit

One-level compact filling, consisting of filters, controllers, valves and pressure monitors With EC design approval according to DVGW worksheet G260.Attention: Service work on the Gas Multi Bloc may only be carried out by authorized tradesmen. ...

• Suitable for Buderus/Sieger: BE-A 2.0-68
  
• Design: 63008723 (imprint flame tube)
  
• Material: Steel
  

• Suitable for elco: V-G01.40/55/85, V-G01.85D, V-G1.40, V-G1.55, V-G1.85, EK01B.4/6G/F-T (SG113), EK01B.9G/F-T, EK01B.9G/F-ZT
  
• Power: 85 W
  
• Voltage: 230 V/50 Hz
  

• Suitable for series Idealtherm
  
• Ref. no.: A961704NU

• DN 15 (1/2”)
  
• Red
  
• No sieve
  

• Distinguishing characteristics:
  
• Service opening (18 x 11 cm)

• With drain valve and odour trap
  
• Incl. fitting kit

• Suitable for Wolf: Condensing value up to 28kW. CGB 11/20/24, CGS-20/160, CGS-24/200, CGW-11/100, CGW-20/120, CGW-24/140
  
• Ref. no.: 298000599

• Suitable for Wolf: TGB-2 20/30/40
  
• Ref. no.: 8616241
  
• Scope of delivery:
  - Maintenance instructions
  - Ignition electrode
  - Ionisation electrodes
  - Seal sets
  - Silicone grease

• Suitable for OERTLI: RLN, VA
  
• Insulator: 6.8 x 50 mm
  
• Retaining plate: 23 x 80 mm
  

Type Junkers 72 x 29 mm,suitable for Seppelfricke a.o.- For thermocouple: type 141 ...

- Suitable for Junkers room heaters etc.- 53 x 29 mm- Ignition gas connection: 4 mm- For thermocouple: type 110 ...

- Suitable for Buderus: H105-7, H205-9/9,5, H305-13, HLV 115/215/315- Connection: 4 mm- Ref. no.: 7736603757- Scope of delivery: - 2 ignition electrodes with ignition cable and accessories. ...

• ø 28 mm
  
• Chrome
  
• Ref. no.: 37132000

• Suitable for urinal flushing system, surface installation
  
• Chrome
  
• Ref. no.: 43052000

• Suitable for: weishaupt WL5
  
• Size: 3μF
  
• Ref. no.: 713 472 replaces 713 462

- Suitable for MHG: GZ 2.1/2.2/N/F- Insulator: 10.8 x 68 mm- Wire Ø: 3 mm- Wire length: 32 + 95 mm- Connection: 6.3 mm- Ref. no.: 95.34036-2003 ...