GENERAL - replacement parts, installation

• Thickness: 2 mm
  
• Suitable for flat-sealing pipe fittings
  
• Tested according to DVGW worksheet W 270
  

• For use in domestic waterworks and pressure elevation systems not subject to DIN 1988
  
• Pressure vessels according to Pressure Equipment Directive 2014/68/EU and DIN EN 13831
  Technical data:
  
• Replaceable membrane
  

• For EV210B, EV220B, IP 00 *)
  * Coils 042N with socket 042N0156 = IP 65
  
• Power consumption at switch-on a.c.: 39 VA, switched-on a.c.: 19 VA
  
• Max. ambient temperature: 40 °C
  

• With terminal box for EV210B, EV220B, EV250B, IP 67, ED 100%
  
• Power consumption at switch-on AC: 40 VA
  
• Switched-on a.c.: 18 VA,
  

• For EV210B, EV220B, EV250B, IP 67, duty cycle 100%
  
• Power consumption at switch-on a.c.: 40 VA, switched-on a.c.: 18 VA
  
• Anchor ø: 13.5 mm

• For GSR solenoid valve
  
• Suitable for model:
  Model 1 | D4322 1002 012: DN 10 (3/8")
  Model 2 | D4323 1002 012: DN 15 (1/2")

• For GSR solenoid valve
  
• Suitable for model:
  Model 1 | A4324 1002 702: DN 20 (3/4")
  Model 2 | A4325 1002 702: DN 25 (1”)
  Model 3 | A3521-23 Model 702: DN 8-15 (1/4" - 1/2”)

• Size: ø 50 x 44 mm
  
• Dimensions (H x L): 230 x 200 mm
  
• Material: Plastic, white

• For pipes with inner ø 100 mm
  
• For WCs with internal outflow
  
• Colour white

• For pipes with inner ø 100 mm
  
• For WCs with internal outflow
  
• Colour white

• ø 26/28 mm x 700 mm
  
• For toilet pressure flusher DN 20 (3/4”)

• Suitable for Geberit® flushing cisterns
  
• Extremely soft, as shaped from high-quality silicon
  
• The material property prevents calcifications on the sealing surface, therefore ensuring a long service life
  

• PU = 10 units

• Grease chamber spindle
  
• No dead space
  
• Material: brass
  

• Grease chamber spindle
  
• No dead space
  
• Material: brass
  

• Suitable for seal range order no. 91 001 55
  
• Approvals: DVGW, HTB and KTW

• Suitable for seal range order no. 91 002 73
  
• Approvals: gas DVGW

• Mesh opening 1.5 mm
  
• Suitable for brass dirt trap, IT

• For installation in heating, water, hydraulic and pneumatic systems
  
• Light ball valve design made of brass, open/closed function
  
• With integrated relay for 2-point control
  

- Suitable for electric ball valve 110/602, 603 ...

• Grease chamber spindle
  
• Free of dead space
  
• Material: brass
  

• Model 1859
  
• Made of polyamide

• Made of polyamide

• Nylon fabric, interchangeable and washable
  
• Filter rating: 80 microns

• Inox fabric, interchangeable and washable
  
• Filter rating: 80 microns

• Material: brass
  
• Surface: chrome-plated
  
• Connection: DN 15 (1/2")
  

• Sealing on the outside of the drainpipe
  
• Connector and inlet cuff
  with rubber seal for flush connections 55 mm ø
  
• Cover caps and washers
  

• Sealing on the inside of the drainpipe
  
• Connector and inlet cuff
  with rubber seal for flush connections 55 mm ø
  
• Cover caps and washers
  

• Connector and inlet cuff with rubber seal for flush connections ø 55 mm
  
• With white cover caps
  
• Special version without warranty
  

• Brass connector with DN 15 (½”) thread and detachable lip seal
  
• For urinals with connection from the rear
  
• Lip seal colour grey

• Size: ø 50 mm x 44 mm
  
• White plastic

• For surface installation flushing cisterns
  
• Size: ø 44 mm
  
• White plastic

• Suitable in sleeveless siphon pipes and HT pipes
  
• Conical shape
  
• Material: EPDM, resistant to aging