Thermal mixer, Hot water mixture

• For installation under the hot water tank
  Technical data:
  
• Cv value: 1.3 m³/h
  
• Setting range: 40°C to 60°C
  

• The VTA 320/ 520 model series are used in water heating systems at a central point immediately downstream of the Hot water heater, where constant mixed water temperature control and scalding protection is required for the entire system or parts of it
  
• Also suitable for water heating systems with a circulation pipe
  
• In Germany, the DVGW worksheets W551, W553 must be observed
  
  Technical data:
  

• With non-return valve and strainer
  
• High heat output
  
• Scald protection
  

• For mounting on a corner valve
  
• With integrated backflow preventer and dirt filter
  
• Setting range 30 - 70°C
  

• Constant service water temperature at the tapping point
  
• Non-stick coating of the valve housing to prevent limescale
  
• Scald protection
  

• For apartment buildings
  
• Adjustable
  
• With replaceable cartridge
  

• Connections:
• Screw connection with external thread
  
• Resistant to limescale
  

• Type 776, flat sealing
  Used in water heaters to control the temperature to the set value. It makes it possible to keep the mixed water temperature at the tapping point constant, at a variable inlet temperature.
  
  Technical data:
  
• Static pressure: max. 10 bar
  
• Dynamic pressure: max. 5 bar
  

- DN 10 (3/8")- With integrated backflow preventer and dirt trap strainer- Setting range 30-70°C- For installation on an angle valve, as scalding protection- Flat-sealing connections- Operating pressure max. 10 bar- Hot water supply max. 80°C- Chrome-plated brass housing- Flow rate at 3 bar: 25 l/ ...

• Material: brass
  
• Surface: chrome-plated
  
• DN10 (3/8“)
  

• Constant service water temperature at the tapping point
  
• Non-stick coating of the valve housing to prevent limescale
  
• Option to lock the target value setting
  

• Constant service water temperature at the tapping point
  
• Non-stick coating of the valve housing to prevent limescale
  
• Option to lock the target value setting
  

• The VTA 320/ 520 model series are used in water heating systems at a central point immediately downstream of the Hot water heater, where constant mixed water temperature control and scalding protection is required for the entire system or parts of it
  
• Also suitable for water heating systems with a circulation pipe
  
• In Germany, the DVGW worksheets W551, W553 must be observed
  
  Technical data:
  

• Suitable for Novamix Value

• Adjustable
  
• Flange connections with union nuts
  
  Technical data:
  
• Max. operating pressure: 14 bar
  

• Adjustable
  
  Technical data:
  
• Connections: Internal thread
  
• Material: Brass housing, chrome-plated
  

• For insertion into the screw connection on cold and hot water feed

• Constant service water temperature at the tapping point
  
• Non-stick coating of the valve housing to prevent limescale
  
• Option to lock the target value setting.
  

• For mounting on a corner valve, as scald protection
  
• With 2 integrated backflow preventers
  
• Adjustment range 30-70°C, pre-set in the factory to 38°C
  

• Connections: External thread, flat sealing
  Used in water heaters to control the temperature to the set value. The mixed water temperature at the tapping point remains constant despite the variable feed temperature.
  
  Technical data:
  
• Operating pressure: max. 10 bar (static) / max. 5 bar (dynamic)
  
• Pressure ratio: max. 2:1
  

• Suitable for Novamix High Capacity

• For mounting on a corner valve
  
• With scald protection in case of kW failure
  
• With backflow preventer and pre-filter
  

• DN 15 (1/2”)
  
• Max. operating pressure: 10 bar
  
• Set temperature: +48°C (±1°C)
  

• With two Check valves
  
• External thread DN 20 (3/4")
  
• Union nut DN 25 (1")
  

• The VTA 320/ 520 model series are used in water heating systems at a central point immediately downstream of the Hot water heater, where constant mixed water temperature control and scalding protection is required for the entire system or parts of it
  
• Also suitable for water heating systems with a circulation pipe
  
• In Germany, the DVGW worksheets W551, W553 must be observed
  
  Technical data:
  

• Also compatible with surface heating systems and tank loading by solid fuel boilers
  
• Constant service water temperature at the tapping point
  
• High flow capacity
  

• For connection directly to the angle valve
  
• For thermostatic service water mixer
  
• Length: 300 mm

• The VTA 320/ 520 model series are used in water heating systems at a central point immediately downstream of the Hot water heater, where constant mixed water temperature control and scalding protection is required for the entire system or parts of it
  
• Also suitable for water heating systems with a circulation pipe
  
• In Germany, the DVGW worksheets W551, W553 must be observed
  
  Technical data:
  

• The VTA 320/ 520 model series are used in water heating systems at a central point immediately downstream of the Hot water heater, where constant mixed water temperature control and scalding protection is required for the entire system or parts of it
  
• Also suitable for water heating systems with a circulation pipe
  
• In Germany, the DVGW worksheets W551, W553 must be observed
  
  Technical data:
  

• Suitable for ESBE Thermal mixers
  
• Connections: Union nut internal thread to external thread, PN10
  
• Two non-return valves for hot water and cold water included

• Type 779, with pipe fittings
  With non-return valves and filters in the connections. Prevents unwanted circulation and reflux. The filters protect the internal mechanics of the mixer from contamination.
  Used in water heaters to control the temperature to the set value. It makes it possible to keep the mixed water temperature at the tapping point constant, at a variable inlet temperature.
  
  Technical data:
  
• Static pressure: max. 10 bar
  
• Dynamic pressure: max. 5 bar
  

• Connections: Screw connection with external thread
  
• Non-return valves in the connections prevent unwanted circulation or reflux due to pressure differences.
  
• Filters in the connections protect the internal mechanics from contamination
  Used in water heaters to control the temperature to the set value. The mixed water temperature at the tapping point remains constant despite the variable feed temperature.
  
  Technical data:
  

• Technical data:
  
• Max. operating pressure: 10 bar
  
• Dynamic pressure: 5 bar
  

• Constant service water temperature at the tapping point
  
• Non-stick coating of the valve housing to prevent limescale
  
• Option to lock the target value setting