Heating
- Operating voltage: 230 V AC, 50Hz
- Switching current: 5(4)A
- Switching capacity: 2300W
- For temperature control of Surface heating systems, cooling systems, heating and cooling ceilings
- Intuitive operation
- Energy-saving room temperature control
- Operating voltage: 230 V AC, 50 Hz
- Switching current: 13(4)A
- Switching capacity: 3000W for direct electric heating, natural stone heating
- For temperature control of Surface heating systems, cooling systems, heating and cooling ceilings
- Intuitive operation
- Energy-saving room temperature control
- Controls and connection strip with adaptive hydraulic balancing and for electrical wiring of panel heating systems
Functions: - Adaptive hydronic balancing
- Subsequent, free heating circuit assignment of the Room thermostats only with FloorCon F 300
- Operating voltage: 24 V AC, 50Hz
- Switching current: 1(1)A
- Switching capacity: 24W
- Flexible corrugated stainless steel pipe
- Hydraulic connection of the outdoor unit
- Scope of delivery:
- Seal sets
- Screw connections
- Junction pieces DN 25 (1") IG
- For workshop, construction site and other rooms
- Housing: sheet steel
- Heating element: Stainless steel
- Liquid-filled Thermostats
- Control range can be limited and blocked
- Palpable setting aid
- For workshop, construction site and other rooms
- Housing: sheet steel
- Heating element: Stainless steel
- For connection to a WLAN router
- Access to your gas condensing boiler via the "MHG mobile app"
- Remote access to real-time information and specialist parameters possible
- Ideal hybrid partner ecoWP Xm 5 (90 131 03)
- Wall-hung gas condensing boiler with copper-aluminium heat exchanger for hot and heating water
- H2-Ready
- Internal setting prevents setpoint adjustment by unauthorised persons. Particularly suitable for installation in schools, kindergartens, authorities and banks.
- Operating voltage: 230 V AC, 50 Hz
- Switching current: 10(4)A
- Ideal hybrid partner ecoGAS ProX (90 131 05)
- For heating only operation
- Operation with R32 refrigerant
- Remote control with integrated room sensor for recording the room temperature as a control variable
- Connection via 2-wire bus
- For temperature control of Surface heating systems, cooling systems, heating and cooling ceilings
- Intuitive operation
- Energy-saving room temperature control
- For limiting the return temperature of a surface temperature control circuit
- Setting the return temperature on the Thermostats
Technical data: - Operating temperature: max. 100C°
- Break-proof underlay before installing the roof hook for Fastening Photovoltaics and solar thermal systems to Slanting roofs
- No breaking of the roof tile under high wind, ice or snow loads
- Can be flexibly adapted to almost any tile shape
- Connection strip for setting up an individual room control for surface heating systems Heating / cooling
Functions: - Changeover switch Heating / Cooling
- Connection of Temperature limiter or dew point sensor only for type 1
- Liquid-filled Thermostats
- Control range can be limited and blocked
- Palpable setting aid
- Passageway design
- Scope of delivery:
- 1x gas ball valve with TAS DN 15 (1/2") female thread
- 1x flow tap DN 20 (3/4") IG, red
- 1x T-piece 3/4" for Safety valve
- 1x Safety valve 3 bar
- 1x return tap DN 20 (3/4") female thread, blue
- 1x Manifold 3/4" with connection for fill and drain valve, MAG and Pressure gauge (on site)
- 1x angle fill and drain valve, rotatable, 3/4" male thread
- 2x ball valve DN 15 (1/2") female thread, green, suitable for drinking water
- 2x T-piece DN 15 (1/2") with flush connection DN 15 (1/2")
- Seal sets
- For temperature control of Surface heating systems, cooling systems, heating and cooling ceilings
- Intuitive operation
- Energy-saving room temperature control
- Compact design with small dimensions
- Simple plug-in installation
- Silent operation with low power consumption
- Technical data:
- Function: Heating and cooling
- Setting temperature range: 5°C to 35°C
- Controls and connection strip with adaptive hydraulic balancing and for electrical wiring of panel heating systems
Functions: - Adaptive hydronic balancing
- Subsequent, free heating circuit assignment of the Room thermostats only with FloorCon F 300
- Technical data:
- Function: Heating and cooling
- Setting temperature range: 5°C to 35°C
- For limiting the return temperature of a surface temperature control circuit
- Setting the return temperature on the Thermostats
Technical data: - Operating temperature: max. 100C°
- Operating voltage: 230 V AC, 50Hz
- Switching current: 10(4)A
- Switching capacity: 2300W
- Covers for alre flush-mounted room thermostats with rotary control and Switches
- Suitable for frames of almost all switch manufacturers
- Protection class: IP 30
Controls or monitors temperatures in closed, dry rooms. Suitable for all types of heating.
- Operating voltage: 230 V AC, 50Hz
- Switching current: 5(4)A
- Switching capacity: 2300W
- Suitable for HI 4000 P infrared radiators for use as individual room heaters- Setting range: 5-37°C- Touchscreen surface- For flush-mounted installation- Functions: Weekly programme, frost protection, reduced, open window, etc.Technical data:- Operating voltage: 230 V, 50 Hz- Max. output: 16 A- P ...
- Both sides 3/8" internal thread.
MHS 1-4 m The adjustable type allows, according to the installation situation, an adaption to the actual hight difference in the range from 1 – 4m. - Adjustable from 1-4 m
- With type approval Z-65.50-305
- For joining and connecting SX and HP collectors
- Size 22 mm
Consisting of: - 1 x compression fitting
- For room temperature-dependent control of surface heating systems
Consisting of: - Flush-mounted wall box
- Valve block with DN 20 (¾”) connection (Eurocone) and venting