Oil installation

• For the removal of fuels in single- and two-line systems
  from underground and above-ground tanks
  
• Rotating tank connection
  
• Quick closing extraction valve
  

• For the removal of fuels in single- and two-line systems
  from underground and above-ground tanks
  
• Rotating tank connection
  
• Quick closing extraction valve
  

TIT-K accessory packagesNIV-O-QUICK quick fitting system (filling line), single line system with floating extraction, with an extraction rate of 20 l/h, content display, pluggable ventilation line, also suitable for heating oil EL A Bio 5 to Bio 10. ...

TIT-K accessory packagesNIV-O-QUICK quick fitting system (filling line), single line system with floating extraction, with an extraction rate of 20 l/h, content display, pluggable ventilation line, also suitable for heating oil EL A Bio 5 to Bio 10. ...

TIT-K accessory packagesNIV-O-QUICK quick fitting system (filling line), single line system with floating extraction, with an extraction rate of 20 l/h, content display, pluggable ventilation line, also suitable for heating oil EL A Bio 5 to Bio 10. ...

• Suitable for all burner brands
  
• Easy to retrofit at any time
  
• Robust and durable
  

• Suitable for all burner brands
  
• Easy to retrofit at any time
  
• Robust and durable
  

• Scope of delivery:
  - Brass screw-in connector
  - retaining ring

• The oil line connection set has been specially designed for small installations and for extending oil lines
  
• Also suitable for use with mineral oils
  Technical data:
  
• Material: Plastic
  

• Installation between filter outlet and burner hose
  
• Vacuum indicator for short-term or continuous monitoring of the pump vacuum; also as a service indicator for filter contamination, e.g. for metal cups
  
• Test hose (order no.: 27 005 25) not included in the scope of delivery

• As a universal replacement for existing discharge systems for
  battery tanks up to 2m in height
  
• Tank connection DN 40 (1 1/2“) including adapter pieces G2”,
  M 60 x 4, S75 x 6, flange ø 68 mm
  
• Safe protection against overfilling with monitoring of all tanks
  

• As a universal replacement for existing discharge systems for
  battery tanks up to 2m in height
  
• Tank connection DN 40 (1 1/2“) including adapter pieces G2”,
  M 60 x 4, S75 x 6, flange ø 68 mm
  
• Safe protection against overfilling with monitoring of all tanks
  

• With screw connection and ball valve R DN10 (3/8") IG x IG
  
• Length: 1 m
  
• Oil-resistant

• Suitable extension for oil line connection set
  
• Scope of delivery 6 mm:
  - 10 x screw-in connector brass 6 mm x DN 10 (3/8")
  - 10 x circlip 6 mm
  
• Scope of delivery 8 mm:
  - 10 x screw-in connector brass 8 mm x DN 10 (3/8")
  - 10 x circlip 8 mm
  

• DN 10 (3/8") cylindrical
  
• Incl. special seal

• For oil storage tank
  
• With spacer star attachment to keep distance from tank base
  
• With backflow preventer
  

• For steel and plastic oil tanks
  
• Integrated thermostat that automatically sets the oil temperature between 8 and 12°C
  
• When the TH220 is used with plastic battery tanks with removal system located at the top, it is recommended to use a tank heater in each of the battery’s individual tanks
  

• In accordance with prEN 12514 (DIN4736-2) for volumetric quantity measurement of heating oil, for installation in the pressure line of ZÖV systems, in the extraction line of single-line systems (oil central heating), if the negative pressure is <0.35 bar
  
• Incl. wall mounting
  
• PTB approval number: 5.223/92.02
  

• With internal thread connection
  
• Roller counter
  
• Registrable up to 99,999 litres
  

• With mechanical counter; horizontal, vertical and diagonal assembly
  
• Temperature up to max. 130°C
  
• Measuring parts made of brass and anodised aluminium
  

• No edge
  
• For Aquametro oil meter with Klingerit seal
  
• PU = 1 pair

• With internal thread connection
  
• Roller counter
  
• Registrable up to 99,999 litres
  

• Accurate assembly instructions are provided for each oil meter Model HZ 5

• With fixing anchor for wall bushing
  
• Suitable as a filling pipe seal

• Fitting on one side, external thread on the other

• a = 20 mm
  
• l1 = 120 mm

• Only recommended for use in venting pipes

• D = 75 mm
  
• l2 = 120 mm

• Note: Pipes 2000 mm in length only available in 5-piece packs

a = 92 mm, b = 122 mm (DN40-87°)a = 56 mm, b = 86 mm (DN40-45°)a = 46 mm, b = 76 mm (DN40-30°)a = 37 mm, b = 67 mm (DN40-15°)a = 120 mm, b = 148 mm (DN50-87°)a = 76 mm, b = 104 mm (DN50-45°)a = 64 mm, b = 92 mm (DN50-30°)a = 53 mm, b = 81 mm (DN50-15°) ...

l1 = 16 mm, l2 = 76 mm (DN40)l1 = 18 mm, l2 = 94 mm (DN50) ...

• With sealing lips
  
• Made of NBR

• T = M8 (DN40/50)

• Made of FBR