Condensate pumps, neutralisation

For condensate neutralisation devices withgas-firing systems.Grain size 5 - 8 mm ...

• For feeding the condensate into the wastewater line
  
• PU = 5 units
  

• For the condensate feed in a centrifugal pump via an PVC hose
  
• PU = 3 units

• PU = 5 units

- For neutralising acidic condensates from gas condensing boilers up to 35 kW- Compact design- Incl. 1 pack of neutralisation granulateTechnical data:- Operating medium: water/acidic condensate- Operating temperature: 5-50°C- Inlet connection Ø: 25 mm ...

• Suitable for SI 82, SI 1830, SI 1802 from year of manufacture 2009, KonHeb 82, KonHeb 1830 and Wilo-DrainLift Con
  
• PU = 3 units

• Horizontal mounting on the wall or on the floor
  Includes neutralisation granulate for initial filling. The granulate disappears on its own, the fill level can be seen clearly through the transparent filter housing. The device is low-maintenance and requires topping up once a year at most
  
• Connections: Plug connection for HT pipe DN 40
  
• Diameter: 125 mm

• For neutraliser Neutrakon® oil and gas

• Electromagnetic, with float module
  
• For conveying condensate from air conditioning and ventilation units
  
• With dirt-resistant valve design
  

• Electromagnetic, with float module
  
• For conveying condensate from air conditioning and ventilation units
  
• With dirt-resistant valve design
  

• External diameter 6 mm
  
• PU = 5 units

• External diameter: 6 mm
  
• PU = 5 units

• Suitable for hose with an inner diameter of 6 mm
  
• PU = 5 pieces

• For connecting hoses ø 6 mm (1/4'') or ø 10 mm (3/8") with hoses ø 12 mm (1/2'') or 16 mm (5/8'')
  
• PU = 5 units

• For connection between condensate collecting tray and float module

• Made of soft rubber
  
• For connecting the float switch to the drain outlets on the condensate drip tray
  
• PU = 3 units
  

• Suitable for condensate pumps for use with hoses of different diameters ø 15 - 20 - 24, 25, 32, 40 mm (5/8" - 3/4" - 1" - 1 1/4" - 1 1/2")
  
• PU = 3 units

• For neutralising condensates from oil and gas-fired heat generators
  
• With lid
  
• Absorber for absorbing combustion residues
  and unburned hydrocarbons
  

• For drainage of condensate from air-conditioning units with coolant pipes Ø max. 10-16 mm
  
• Installation next to the air-conditioning units
  
• Bracket covered in vibration-absorbing material
  

• Connection set for simple mounting of the neutralisation system Neutrakon 01/25 to condensate pumps KonHeb 82 and SI 82 or the sewer system
  Delivery contents:
  2 x angle fitting (inlet and outlet)
  2 x riser
  1 x connecting hose 1 m
  1 x hose tape

- For the discharge of condensate in air-conditioning units.- The slim housing allows installation in ducts and air-conditioning units- For air conditioners up to 20 kWScope of delivery:- Si-20- Float switch SI2958- PVC hose length 60 mm, with ventilation valve- Mounting kit- Cable for power supply ...

• For installation in the indoor unit
  
• Max. flow rate: 12 l/h
  
• Discharge head max.: 10 m
  

• Suitable for oil* and gas-fired condensing technology up to 25 kW
  (*With active carbon brush set for use in oil-fired condensing systems)
  Features:
  
• Noise reduced electromagnetic piston pump
  
• Floating switching contact, can be loaded up to 10 A/230 volt
  

• Suitable for oil* and gas-fired condensing technology up to 25 kW
  (*With active carbon brush set for use in oil-fired condensing systems)
  Features:
  
• Noise reduced electromagnetic piston pump
  
• Floating switching contact, can be loaded up to 10 A/230 volt
  

• For the neutralisation of acid condensate from gas boilers and exhaust lines
  
• The filling of a box is sufficient for approx. 50 kW boiler output
  
• Suitable for EKF 15-25NB
  Technical data:
  

• Package consisting of:
  
• 4x Condensate pumps KonHeb 82, incl. 5 m PVC Hoses (ø 10 mm)
  
• For discharging condensation from gas condensing boilers, air conditioning systems and refrigerating equipment.
  

• For delivering condensate from air-conditioning devices, cooling devices, gas-fired condensing boilers and gas-fired heating devices
  
• Fully wired, with level control, safety cut-out, collecting tank (ABS), non-return valve
  
• Flow rate: max. 4.9 l/min,
  

• For delivering condensate from air-conditioning devices, cooling devices, gas-fired condensing boilers and gas-fired heating devices
  
• Fully wired, with level control, safety cut-out, collecting tank (ABS), non-return valve
  
• Flow rate: max. 4.9 l/min,
  

•  For delivering condensate from gas condensing boilers, air conditioning systems and refrigerated counters
  
•  Pump unit also suitable for use in external sumps, tank height min. 62 mm max. 70 mm
  
• Integrated non-return valve
  Technical data:
  

• Flow rate max.: 8 l/h
  
• Discharge head max.: 6 m
  
• Noise level: ≤ 28 dBA
  

• Split design with separate float module, compact size
  
• For air conditioning devices to 20 kW
  Technical data:
  
• Max. flow rate: 20 l/h
  

• For delivering condensate from air-conditioning devices, cooling devices, gas-fired condensing boilers
  
• With large tank: 3.8 litres
  Technical data:
  
• Flow rate: max. 6.3 l/min
  

• Max. temperature load: 60 °C / pH > 2.0
  Delivery contents:
  
• Connecting parts DN 40 or hose 20 mm
  
• 500 g activated charcoal for initial filling
  

• for Neutrakon® 06/B and pre-filter
  
• Scope of delivery:
  - 2 x 250 g activated carbon
  - Empty container for used activated carbon

• Fully connected safety overflow protection in the form of a special additional power cord with built-in fault lamp and acoustic signal (horn)
  
•  For delivering condensate from gas condensing boilers, air conditioning systems and refrigerated counters
  
•  Pump unit also suitable for use in external sumps, tank height min. 62 mm max. 70 mm