Drinking water circulation pumps and accessories
- 3 speed levels
- Screw connection not included
Technical data: - Housing material: Gunmetal
Circulation control over The Circon is an automatic pre-switching device for the demand dependent On and Off switching of the circulation pump in the hot water cycle. The entire control is by micro-controller after the most modern pricipals. By using this product a dramatic reduction in energy and h ...
- Electrical connection through detachable plug-in connection
Technical data: - Operating voltage: 230 V/ 50Hz
- Max. operating temperature: 95°C
- For drinking water circulation systems in detached and semi-detached houses
- High-efficiency wet rotor permanent magnet motor
- Integrated dry-running protection
- Indicator light for transmitter function
- Suitable for econ.maxxda®
Technical data: - Dimensions (L x W x H): 60 x 30 x 14 mm
- BWO 155 V ERT
with V pump housing (connection DN32 (1¼”) ET) with brass screw/soldered fittings DN15 (½”) ET / internal ø 15 mm - With non-return and shut-off valve
- Permanent magnet motor with dry-running protection
- Suitable for BWO 155 SL
- With self-learning module AUTOlearn technology
- Incl. cable box
- Suitable for DN 15 (1/2”) circulation pumps
- Size: DN 15 (1/2”) ET x DN 25 (1”) ET flat sealing
- Material: brass
Consisting of:
- Screw connection not included
Technical data: - Housing material: Gunmetal
- Medium temperature: up to 65 °C (short-term up to 70 °C)
- BWO 155 R SL
With R pump housing (connection: DN15 (1/2”) IT) - Non-return valve (RV 153, pressure side, order no. 93 085 08) or ball shut-off valve (KV 150, suction side, order no. 93 085 09) must also be installed and are available as accessories
- Permanent magnet motor with dry-running protection
- DN 15 (1/2") IT x DN 15 (1/2") ET for DN 15 (1/2") pumps
A wet running pump with the following qualities:- Ceramic radial bearing.- Carbon axial bearing.- Bearing disc and seat from rustproof steel.- Corrosion-resistant impeller, composit, PES.- Bronze pump casing.Technical data:Temperature class: 110Test codes: VDE, GS, B, CESafety class: IP44Materials:P ...
- Doubles the range of the econ.maxxda® to approx. 60 m
- Suitable for econ.maxxda®
Technical data: - Assembly: Wall mounting or standing installation possible
- Indicator light for transmitter function
- Suitable for econ.maxxda®
Technical data: - Dimensions (L x W x H): 80 x 50 x 12 mm
- DN 15 (1/2" IT) x DN 15 (1/2" ET) for DN 15 (1/2") pumps
- For simple connection to a solar hot water tank or combi tank
- With Lowara ecocirc circulation pump PRO 15-1/65RU
- With thermostat and time switch
- For drinking water circulation systems in detached and semi-detached houses
- High-efficiency wet rotor permanent magnet motor
- Integrated dry-running protection
- 1 pair
- Suitable for Vortex, Grundfos
- BWO 155 R ERT
With R pump housing (connection: DN15 (1/2”) IT) - Non-return valve (RV 153, pressure side, order no. 93 085 08) or ball shut-off valve (KV 150, suction side, order no. 93 085 09) must also be installed and are available as accessories
- Permanent magnet motor with dry-running protection
- Quick, easy Installation and replacement of common pump types thanks to flexible service motor and Wilo-Connector
- Supports thermal Disinfection
- With integrated timer switches and temperature monitoring
- Enables daily recurring switching operations
- Also to prevent water germination (legionella) during longer absences
- Suitable for econ.maxxda®
- - For drinking water circulation systems in residential buildings
- Shaftless ball rotor
- Blockage-proof and decalcification-proof
- Rotary knob for stepless adjustment
- With automatic venting mode
- With LED malfunction indicator
- Models with length 110 mm incl. shut-off and non-return valve
- Incl. heat insulation jacket and connection cable
- Supplied without screw connection
Technical data:
- Operating voltage: 230 V, 50 Hz
- Power consumption: 3-9 W
- Operating pressure max.: 10 bar
- Operating temperature medium max.: 65°C
- Max. delivery rate: 1 m³/h
- Discharge head max.: 1 m
- Material housing: brass
- Material ball rotor: Stainless steel/composite material
- Length of connection cable: 2 m - Protection type: IP 44
- Display of the current consumption in watts and flow rate
- With Wilo Connector plugs
- Incl. heat insulation jacket
- Consisting of:
- 1 x Evenes EV ZUP 15 Plus circulation pump
- 1 x connection set with flushing device DN 15 (1/2")
- Suitable for BWO 155 ERT
- With electronic control thermostat
- Universal replacement motor for third-party products and as a spare motor
- Consisting of:
- 1 x non-return valve DN 15 (1/2”) ET x IT
- 1 x fresh water ball valve with screw connection DN 15 (1/2")
- BWO 155 V
with V pump housing (connection DN32 (1¼”) ET) with brass screw/soldered fittings DN15 (½”) ET / internal ø 15 mm - With non-return and shut-off valve
- Permanent magnet motor with dry-running protection
- Manual activation of the pump with external radio switch
- Bidirectional radio technology
- Radio module can be plugged into any earthed socket outlet
- - For drinking water circulation systems in residential buildings
- Shaftless ball rotor
- Blockage-proof and decalcification-proof
- Rotary knob for stepless adjustment
- With automatic venting mode
- With LED malfunction indicator
- Models with length 110 mm incl. shut-off and non-return valve
- Incl. heat insulation jacket and connection cable
- Supplied without screw connection
Technical data:
- Operating voltage: 230 V, 50 Hz
- Power consumption: 3-9 W
- Operating pressure max.: 10 bar
- Operating temperature medium max.: 65°C
- Max. delivery rate: 1 m³/h
- Discharge head max.: 1 m
- Material housing: brass
- Material ball rotor: Stainless steel/composite material
- Length of connection cable: 2 m - With control thermostat and time switch
- Control thermostat setting range: 20-70°C
- Integrated Timer switches with thermostat function
- Recognises and supports thermal Disinfection
- With Wilo Connector plugs
- with W-valves, thus identical in length to Wilo Star- Z 15, Nova- Without control module- Installation length: 138mm- Incl. heat insulation jacketTechnical data:- Housing material: brass- Power consumption: 2.5 to 9 W- Operating voltage: 230 V/50 Hz ...
- Pumping media:
- Drinking water and heated drinking water up to a temperature of 65°C and a degree of hardness of 14°dH (carbonate hardness)
- Pure, thin, non-caustic and non-explosive, mineral-oil-free media with no solid or long fibrous components
- For use in hot water circulation, heating, air conditioning, cooling and industrial systems
- Bluetooth interface for wireless data exchange
- The display shows current consumption m³/h, output [W], as well as aggregated power consumption [kWh]
- Suitable for BWO 155 Z
- With time switch
- Universal replacement motor for third-party products and as a spare motor
- BWO 155 V SL
with V pump housing (connection DN32 (1¼”) ET) with brass screw/soldered fittings DN15 (½”) ET / internal ø 15 mm - With non-return and shut-off valve
- Permanent magnet motor with dry-running protection
- Automatic activation of the circulation pump, e.g. when entering the bathroom
- Any number of transmitters can be used
- Suitable for econ.maxxda®
Technical data: