Heat meters

• Suitable for all F90-3 heat quantity counters
  
• Incl. connection cable and seal

• Data collector for remote reading
  
• Connection of different meters from different manufacturers via open OMS
  
• Readout interval twice a month

• With 2 pulse outputs
  
• For pulse-based energy and volume output
  
• Suitable for all F90-3 heat quantity counters
  

• For heat meters DN 20 (T 3/4”)-110 mm and DN 25 (T 1”)-130 mm
  
• Ball valve DN 25 (T 1”) with connection M10 × 1 (KH-WMZ) for short, direct immersion sensor in accordance with EN 1434
  
• Flat-sealing assembly on right or left of manifold with DN 25 (1”) ET
  

• For installation of the sensor in the ball valve
  
• Half-shell with M10 thread
  
• 2 x O-ring for temperature sensor
  

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• Suitable for all F90-3 heat quantity counters
  
• 230 V/AC

• For parameterisation and readout of Zenner devices
  
• The MinoConnect Set Bluetooth Radio ZR is required for operation

• Suitable for capsule heat meter C5 A1 from constr. yr. 07/2019

• Fully pre-assembled in flush-mounted cabinet
  
• Installation depth: 90 mm - 120 mm
  
• Galvanised- front panel white RAL 9010
  
  Return:
  1x DN 20 (3/4“) flush pipe 110 mm, 2x DN 20 (3/4“) ball valves (with vertical secondary connection 1x DN 12 (3/8“) air plug)
  
  Flow:
  1x DN 20 (3/4“) ball valve, 1x t-piece for
  DN 12 (3/8“) thermowell (for vertical secondary connection 1x DN 12 (3/8“) air plug)
  

• Suitable for Elster heat meters
  
• Sensor seat located directly in medium
  
• With copper seal

• All volume measuring parts are dry running, to protect the counter from high temperatures. The special design and the configuration of the materials ensure durable measurement stability and high reliability.
  
  The connection and construction dimensions comply with DIN ISO 4064. On request we can deliver a flange design with flange dimensions to DIN 2501.
  
• Two impulse outputs for energy and volume programmed as standard before delivery
  
• For flow rates of 1.5 m³/h to 10 m³/h
  

• Reliability and high measuring dynamics guarantee optimum measurements throughout the entire duration of use. All main devices and consumption data can be called up via one single button, such as key date values, maximum values and the saved values from the last 24 months.
  
• Very low installation height
  
• Single-beam flow sensor
  

• - Removable arithmetic unit with integrated Wall brackets
  - Integrated optical interface
  - Free slot for option module
  - Installation position: horizontal or vertical
  - Can be used in reverse and forward flow
  - Storage of maximum and monthly values
  - Power supply units 230V/AC can be retrofitted on site
  - Replaceable Batteries
  - MID-compliant
  
  Technical data
  - Ambient temperature: 5-55°C
  - Operating pressure max: 16 bar
  - Operating temperature: 15-90°C
  - Material: brass
  - Probe cable length: 1.5 m
  - Protection class: IP65
  - Batteries: 10 years
  - Measuring cycle: 2 and 60 sec.
  
• Sensor: ø 5.2 mm
  - Cable length arithmetic unit: 0.5 m
  - Propylene glycol 30%

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• The arithmetic unit of the ultrasonic heat meter evenes is rotatable and removable as standard, with an easily readable and self-explanatory display.
  
• Very low installation height
  
• Any installation position (even over head)
  

• Measuring capsule flow sensor
  
• Arithmetic unit rotatable and removable
  
• Very low installation height
  

• For legally compliant consumption and heating cost billing in accordance with the Heating Cost Ordinance (HeizkostenV)
  
• With integrated radio module (wireless M-Bus, OMS-certified)
  
• Batteries for 10 years operating time (observe national calibration periods)
  

• Reliability and high measuring dynamics guarantee optimum measurements throughout the entire duration of use. All main devices and consumption data can be called up via one single button, such as key date values, maximum values and the saved values from the last 24 months.
  
• Very low installation height
  
• Single-beam flow sensor
  

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• Suitable for all F90-3 heat quantity counters
  
• Incl. connection cable and seal

• Detachable arithmetic unit with 0.5 m cable length, with wall bracket
  
• Integrated optical interface
  
• Free slot for option module
  

• Fully pre-assembled in flush-mounted cabinet
  
• Installation depth: 90 mm - 120 mm
  
• Galvanised- front panel white RAL 9010
  
  Return:
  1x DN 20 (3/4“) flush pipe 110 mm, 2x DN 20 (3/4“) ball valves (with vertical secondary connection 1x DN 12 (3/8“) air plug)
  
  Flow:
  1x DN 20 (3/4“) ball valve, 1x t-piece for
  DN 12 (3/8“) thermowell (for vertical secondary connection 1x DN 12 (3/8“) air plug)
  

- Removable arithmetic unit with integrated Wall brackets- Integrated optical interface- Free slot for option module- Installation position: horizontal or vertical- Can be used in reverse and forward flow- Storage of maximum and monthly values- Power supply units 230V/AC can be retrofitted on site- ...

• - Removable arithmetic unit with integrated Wall brackets
  - Integrated optical interface
  - Free slot for option module
  - Installation position: horizontal or vertical
  - Can be used in reverse and forward flow
  - Storage of maximum and monthly values
  - Power supply units 230V/AC can be retrofitted on site
  - Replaceable Batteries
  - MID-compliant
  
  Technical data
  - Ambient temperature: 5-55°C
  - Operating pressure max: 16 bar
  - Operating temperature: 15-90°C
  - Material: brass
  - Probe cable length: 1.5 m
  - Protection class: IP65
  - Batteries: 10 years
  - Measuring cycle: 2 and 60 sec.
  
• Sensor: ø 5.2 mm
  - Cable length arithmetic unit: 0.85 m

• - For legally compliant consumption and heating cost billing in accordance with the Heating Cost Ordinance (HeizkV)
  - With integrated radio module (Wireless M-Bus, OMS, 868 MHz)
  - Individual AES radio key included with each meter
  - Removable arithmetic unit with integrated Wall brackets
  - Integrated optical interface
  - Batteries can be replaced
  - Installation position: horizontal or vertical
  - Can be used in return and flow
  - MID-compliant (MID DE-16-MI004-PTB025)
  - Power supply units 230 V/AC can be retrofitted on site
  
  Technical data
  - Ambient temperature: 5-55°C
  - Operating pressure max.: 16 bar
  - Operating temperature range: 15-90°C
  - Housing material: brass
  - Probe cable length: 1.5 m
  - Protection class: IP65
  - Power supply: Batteries 3V (A-cell) 10 years
  - Measuring accuracy: Class 2 Class 3
  - Measuring cycle: 2 and 60 sec.
  
  
• Sensor: ø 5.2 mm
  - Cable length arithmetic unit: 0.5 m

• - For legally compliant consumption and heating cost billing in accordance with the Heating Cost Ordinance (HeizkV)
  - With integrated radio module (Wireless M-Bus, OMS, 868 MHz)
  - Individual AES radio key included with each meter
  - Removable arithmetic unit with integrated Wall brackets
  - Integrated optical interface
  - Batteries can be replaced
  - Installation position: horizontal or vertical
  - Can be used in return and flow
  - MID-compliant (MID DE-16-MI004-PTB025)
  - Power supply units 230 V/AC can be retrofitted on site
  
  Technical data
  - Ambient temperature: 5-55°C
  - Operating pressure max.: 16 bar
  - Operating temperature range: 15-90°C
  - Housing material: brass
  - Probe cable length: 1.5 m
  - Protection class: IP65
  - Power supply: Batteries 3V (A-cell) 10 years
  - Measuring accuracy: Class 2 Class 3
  - Measuring cycle: 2 and 60 sec.
  
  
• Sensor: ø 5.2 mm
  - Cable length arithmetic unit: 0.85 m

• - Removable arithmetic unit with integrated Wall brackets
  - Integrated optical interface
  - Free slot for option module
  - Installation position: horizontal or vertical
  - Can be used in reverse and forward flow
  - Storage of maximum and monthly values
  - Power supply units 230V/AC can be retrofitted on site
  - Replaceable Batteries
  - MID-compliant
  
  Technical data
  - Ambient temperature: 5-55°C
  - Operating pressure max: 16 bar
  - Operating temperature: 15-90°C
  - Material: brass
  - Probe cable length: 1.5 m
  - Protection class: IP65
  - Batteries: 10 years
  - Measuring cycle: 2 and 60 sec.
  
• Sensor: ø 5.2 mm
  - Cable length arithmetic unit: 0.5 m

• All volume measuring parts are dry running, to protect the counter from high temperatures. The special design and the configuration of the materials ensure durable measurement stability and high reliability.
  
  The connection and construction dimensions comply with DIN ISO 4064. On request we can deliver a flange design with flange dimensions to DIN 2501.
  
• Two impulse outputs for energy and volume programmed as standard before delivery
  
• For flow rates of 1.5 m³/h to 10 m³/h
  

• MID-compliant
  Consisting of:
  
• 2x ball valves with temperature sensor connection M10x1, pipe-side internal thread and meter-side union nut
  
• 1x ball valve with temperature sensor connection M10x1
  

- Removable arithmetic unit with integrated Wall brackets- Integrated optical interface- Free slot for option module- Installation position: horizontal or vertical- Can be used in reverse and forward flow- Storage of maximum and monthly values- Power supply units 230V/AC can be retrofitted on site- ...

• Reliability and high measuring dynamics guarantee optimum measurements throughout the entire duration of use. All main devices and consumption data can be called up via one single button, such as key date values, maximum values and the saved values from the last 24 months.
  
• Very low installation height
  
• Single-beam flow sensor
  

• Consisting of:
  - 1 x ball valve with measuring probe connection
  - 2 x ball valves without probe connection
  - 1 x flush-mounted housing

• Measuring capsule flow sensor
  
• Arithmetic unit rotatable and removable
  
• Very low installation height