Electric hot water tank

• Only for one tapping point
  
• Polypropylene inner container
  
• Temperature adjustment to 85°C
  

• For enclosed (pressure-resistant) wall storage heaters up to 200 litres
  
• Chrome-plated
  
• Connections DN 15 (1/2“)
  

• For horizontal and vertical installation
  
• Includes insulation
  
•  With double shut-off, backflow preventer, pressure gauge connection, diaphragm safety valve and extendable discharge hopper
  Technical data:
  

• For horizontal and vertical installation
  
• Includes insulation
  
•  With double shut-off, backflow preventer, pressure gauge connection, diaphragm safety valve and extendable discharge hopper
  Technical data:
  

• For horizontal and vertical installation
  
•  With two shut-off valves, backflow preventer, pressure gauge connection, diaphragm safety valve and extendable discharge hopper
  Technical data:
  
• Max. operating pressure: 10 bar
  

• For enclosed (pressure-resistant) hot water heaters up to 200 litres
  
• Combination fitting in straight-through form with safety valve, pressure gauge, shut-off device with non-return valve
  
• Material: Brass
  

• For one or more tapping points
  
• For pressurised connection (closed), always use a Safety valve
  
• For single-circuit and dual-circuit operation
  

• For one or more tapping points
  
• Safety valves must be used for pressurised connection (closed)
  
• For single-circuit and dual-circuit operation
  

• For one or more tapping points
  
• For pressurised connection (closed), always use a Safety valve
  
• For single-circuit and dual-circuit operation
  

• For one or more tapping points
  
• Safety valves must be used for pressurised connection (closed)
  
• Inner tank 5L made of copper, 10L made of steel
  

• For one or more tapping points
  
• Safety valves must be used for pressurised connection (closed)
  
• For single-circuit and dual-circuit operation
  

• For centralised supply of entire residential buildings
  
• Stepless temperature adjustment
  
• Inner tank made from enamelled sheet steel
  

- Thermal storage battery that converts electricity directly into heat and stores it for hot water supply. The salt filling(PCM) is heated to 70°C via an electric heating element. When domestic water flows through, the salt cools down again and transfers the stored heat to the stainless steel heat ...

• Only for one tapping point
  
• Under-sink installation
  
• Temperature adjustment by means of rotary switch
  

• Only for one tapping point
  
• Top table mounting
  
• Temperature adjustment by means of rotary switch
  

• For one or more tapping points
  
• Indirect tubular air heating system
  
• For single-circuit and dual-circuit operation (night tariff)
  

• For enclosed (pressure-resistant) wall storage heaters up to 200 litres
  
• Connection DN 15 (1/2”)
  
• Safety valve: 6 bar
  

• Only for one tapping point
  
• Inner tank made of stainless steel, does not require a protective anode
  
• Short supply pipes, low heat loss
  

• Only for one tapping point
  
• Short supply pipes, low heat loss
  
• Plastic boiler
  

• For one or more tapping points
  
• Safety valve must be used with pressure connection
  
• Can be used with a suitable connection and mixing battery as a depressurised hot water tank for one tapping point only
  

• NOTE: Delivery from 100 litres!
  
• For one or more tapping points
  
• Safety valve must be used with pressure connection
  

• For one or more tapping points
  
• Safety valve must be used with pressure connection
  
• Oval design
  

• For one or more tapping points
  
• Safety valve must be used with pressure connection
  
• Oval design
  

• Only for one tapping point
  
• Under-table installation
  
• Plastic inner container
  

• For the central supply of complete residential buildings
  
• Closed special enamelled inner container with magnesium protective anode
  
• Low standby energy consumption with excellent rigid foam thermal insulation
  

• For one or more tapping points
  
• Universal connection for single circuit and
  economical double circuit operation
  
• Electronic temperature control with
  two temperature sensors
  

• For enclosed (pressure-resistant) warm water heaters up to 1,000 litres
  
• All components flat sealing
  
• In two axes that can each be rotated 360°
  

• For enclosed (pressure-resistant) hot water heaters up to 200 litres
  
• Combination valve in straight form with safety valve, shut-off valve, non-return valve and testing screw
  
• Material: Brass
  

• For adjusting and checking thermostat fittings and water heaters
  
• The measurement range for the volume flow is selected using a setting disc with holes of various sizes: 1.6 to 4 l/min, 4 to 8 l/min or 8 to 16 l/min
  
• The device is held under the open water tap and indicates the water temperature of the corresponding sample
  

• For installation under the hot water tank
  Technical data:
  
• Cv value: 1.3 m³/h
  
• Setting range: 40°C to 60°C
  

• For sealed (pressure-resistant) water tanks up to 10 litres
  
• With backflow preventer, pressure reducer and flexible connection hoses
  
• Safety valve: 7 bar

• Water heating from 0.2 to 5 litres
  
• Temperature range can be adjusted steplessly from approx. 35°C to boiling
  
• Durable: radiator outside the water / under the base plate
  

• Only for one tapping point
  
• Under-table installation
  
• Plastic inner container
  

•  Drip stop prevents dripping while heating up
  
•  Pressure stop is activated if calcification is detected
  
• For one tapping point only
  

Technical data:

• The Safety groups for surface mounting of closed wall-mounted storage tanks and small pressurised storage tanks can be mounted horizontally or vertically
  
• Safety valves 6 bar