Heat generator

• For workshop, construction site and other rooms
  
• Housing: sheet steel
  
• Heating element: Stainless steel
  

• For workshop, construction site and other rooms
  
• Housing: sheet steel
  
• Heating element: Stainless steel
  

Consisting of:1x Atmos P21 pellet boiler (4 - 19.5 kW), with A25 pellet burner and 1.5 m screw conveyor (90 888 82)1 x System manager PM3 (buffer charging) (90 827 38)1 x flue tube, ø 150 mm, adjustable from 0° to 90° (33 013 29)1 x draught regulator, for mounting on the flue tube 150 mm (33 003 ...

The base plate also protects high-quality floors from scratches, sparks and dirt due to ash and scrap wood that drops. ...

• Without crimping
  
• Insulated
  
• Suitable connection for Austria Email split heat pumps:
  - Output 5-8 kW: 1/2" - 1/4"
  - Output 10-17 kW: 3/8" - 5/8"
  

• Suitable for ANTEA NEXT KRB
  
• Passageway version
  
• Scope of delivery:
  - 4 x shut-off ball valve DN 20 (3/4")
  - 2 x intermediate piece with drain DN 20 (3/4")
  - 2 x extension screw connection DN 20 (3/4")
  - 1 x gas shut-off ball valve with TAS, DN 15 (1/2")
  - 8 x Seal sets DN 20 (3/4")

• With silicone seal
  
• Material: Steel, painted
  
• Colour: black
  

• With double sensor fuse
  
• For solid fuel boiler
  
• Permanently set to: 95°C
  

• Suitable for all MCZ Hydromatic pellet stoves
  
• Prevents condensation from forming, extends the service life of the pellet stove
  
• Control temperature: 45°C
  

• Suitable for Itaca KC/KB, ANTEA NEXT KC and FORMENTERA
  
• Corner design
  
• Scope of delivery:
  - 1 x Angle shut-off ball valve DN 15 (1/2") x DN 15 (1/2") ÜWM
  - 2 x copper elbow 18 mm x DN 20 (3/4") ÜWM
  - 1 x copper elbow 15 mm x DN 15 (1/2") ÜWM
  - 1 x Copper pipe 15 mm x DN 15 (1/2") ÜWM
  - 2 x transition 18 mm x DN 20 (3/4") AG
  - 2 x transition 15 mm x DN 15 (1/2") AG
  - 1 x drain valve DN 15 (1/2")
  - 1 x gas appliance shut-off ball valve angle with TAS, DN 15 (1/2")
  - 2 x Seal sets DN 20 (3/4")
  - 3 x Seal sets DN 15 (1/2")

• Technical data:
  
• Operating voltage: 230 V/50 Hz
  
• Test specifications: DIN EN 267, 1st BImSchV 2010
  

The base plate also protects high-quality floors from scratches, sparks and dirt due to ash and scrap wood that drops. ...

• Suitable for Waterstage High-Power
  
• For 2-step switching of the outdoor module to silent mode
  
• Ref. no.: UTW-KLNXE
  

• Suitable for: WPL 20 A, WPL 25 A
  
• For mounting the air/water Heat pumps on masonry
  
• Made from corrosion-resistant galvanised steel
  

• For installation in the installation room
  
• Can be installed and operated in various operating modes
  
• Monitors the permissible differential pressure (Pa) between:
  - Installation room and chimney (SD), a negative pressure of 4 Pa in the flue gas system is required
  - Installation room of the fireplace and external pressure (AD), a negative pressure in the installation room of max. 4 Pa is permissible in ambient air-independent operation
  - Installation room of the fireplace us external pressure (AD), a negative pressure in the installation room of max. 8 Pa is permissible in room air-independent operation
  

- Fully automated supply air flap control- The temperature in the combustion chamber is analysed and evaluated- Reduces emissions through optimal oxygen supply- Reminder to add wood via the conFlame appAttention:ConFlame must be ordered directly together with the stove! The combustion system is inst ...

• Gas combi boiler for heating, with plate heat exchanger and 3-way switching valve for domestic hot water preparation
  
• Wall-mounted
  
• Gas heater for renovations (in accordance with the Ecodesign Directive)
  

• For mounting on the rear exhaust connection.
  
  
• Up to 20% energy saving
  
• Reduced fine dust emissions
  

• Factory-fitted electric heating element with 9 kW
  
• Monoenergetic operation for:
  - Emergency operation
  - Legionella heating
  - Screed function
  
  Note: One heating element per Heat pumps! No combination with Smart BVT possible!

• Suitable for gas condensing boiler CGB-2 35/55
  
• Consisting of:
  - 2 x continuous maintenance tap with fill and drain valve
  - 1 x gas ball valve, straight shape DN 20 (3/4") with thermal shut-off
  - 1 x safety valve DN 20 (3/4") IT (response pressure: 3 bar)
  - 1 x drain funnel

• Size: DN 25 (1”)
  
• 2 hoses, 5 m each
  
• 2 Geka coupling DN 25 (1") IT

• Voltage: 230 volts, 50 Hz
  
• Incl. pressure controller with hose
  
• With piezo ignition

• Voltage: 230 volts, 50 Hz
  
• Incl. pressure controller with hose
  
• With piezo ignition

• Jute interior with PE protection
  
• Dust-proof and chip-proof
  
• Foldable
  

• ø 60 mm
  Delivery only within Germany

• Suitable for: LWP/LWPK A.I., LWP/LWPK HT, LWP/LWPK HP
  
• For expanding a mixed heating circuit, pool or boiler integration

- For temperature-controlled circulation pump via Smart-Control- Mixer circuit control ...

• In conjunction with storage tank charging pump set SLS for hot water tank below ground level
  
• Scope of delivery:
  - 2 x Nipple DN 25 (1") 150 mm
  - 2 x T-piece DN 25 (1")

• For connecting combustion air components
  
• Length: 60 - 150 cm (extendible)
  
• Ø 100 mm

• Heat pump exclusively for hot water production
  
• Ideal for retrofitting or supplementing existing water heaters.
  
• Simple and fast assembly due to monoblock design
  

• Suitable for gas condensing boilers (not for CGS-2) and CGU-2 boilers
  
• Consisting of:
  - 1 x gas ball valve with TAS
  - 1 x corner maintenance tap with fill and drain valve
  - 1 x corner maintenance tap with fill and drain valve and connection for safety valve DN 15 (1/2”)
  - 1 x safety valve (response pressure: 3 bar)
  - 1 x drain funnel

• Suitable for gas condensing combi boiler CGB-2K and gas combi boiler CGU-2K
  
• Consisting of:
  - 1 x gas ball valve with TAS
  - 1 x straight-through service tap with fill and drain valve
  - 1 x straight-through service tap with fill and drain valve and connection for DN15 Safety valve (1/2")
  - 1 x Hot water connection piece
  - 1 x Cold water connection piece
  - 1 x Safety valve (response pressure 3 bar)
  - 1 x drain funnel

• ø 60 mm
  
• Incl. 3 pipe clamps
  Delivery only within Germany

• - Weather protection for the hydraulic connection lines of the heat pump
  
• Length adjustable from 190–400 mm
  
• Made of corrosion-resistant galvanised steel