Sealing

• Approvals for:
  
• DIN-DVGW for gas according to EN751-3 FRp and GRp and DIN 30660, test up to 100 bar with gases of the 1st, 2nd and 3rd family and with hot water (NV-5143BP0261)
  
• Drinking water test in accordance with KTW recommendations of the Federal Health Office
  

- 1-component sealant based on hybrid polymer SMP- Mould-resistant (microorganisms DIN ISO 846)- Very good primerless adhesion to numerous substrates, even when exposed to water- Very high mechanical strength, notch resistance and tear propagation resistance- For stress-compensating seals and dynami ...

• Application:
  
• Venting
  
• Flushing connections
  

• Medium strength
  
• Pipe thread sealant for metal thread
  
• Suitable, among other things, for applications at low temperatures, e.g. for maintenance work outside industrial plants, etc.
  

• Medium solid
  
• Anaerobic, pasty
  
• Temperature application range: -50 °C to +150 °C
  

• Medium strength
  
• Hardening, liquid
  
• Thread size max.: DN 20 (3/4")
  

• Heat-resistant
  
• Protects from rust
  
• From seals on flanges and surfaces becoming stuck, as well screws and bolts etc. that are exposed to strong heat
  

• SHK-Tape is the universal tape for the plumbing, heating and air-conditioning sector, it seals, insulates, protects and secures. SHK is self-bonding and stick without any glue by adhesion once stretched
  
• Contents: 2 rolls per box
  
  Technical data:
  
• Each roll is 3 m long, 25 mm wide and 0.5 mm thick
  

• Used for additional leakage protection when pre-filling with mortar
  
• Length: 5 m
  
• Dimensions (W x H): 20 x 10 mm

• Advantages:
  
• Ceramic fibre felt with thin sheet metal backing
  
• Adapts to any contour
  

• Open design, closable with stainless steel clip for using a subsequent assembly
  
• Shrink range min.: 30 mm
  
• Shrink range max.: 100 mm
  

• For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
  
• Airtight according to DIN 4108 Teil 7 and EnEV 2014
  
• Protects against structural damage that can result from uncontrolled air exchange
  

• Multiple building structure feed-through for pipes and cables
  
• Easy handling and fast installation possible, even as retrofit
  
• High-quality construction
  

• For absorbent and less absorbent substrates
  
• Acts as an adhesion promoter as well as for moisture-barrier consolidation and priming of wall and floor surfaces
  
• For indoors and outdoors
  

• Processing temperature: min. +4°C
  
• 1-component solvent-free elastic sealing with acrylate base according to EN 14891
  
• Used in wet areas against non-pressurised water, in residential areas on floor and walls, as a waterproofing measure under tiles and slabs
  

• Material: Brass CW617 N
  
• Length: 60 mm
  
• External diameter: 28 mm
  

• For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
  
• Airtight according to DIN 4108 Teil 7 and EnEV 2014
  
• Protects against structural damage that can result from uncontrolled air exchange
  

• Apply directly from the bottle to the cleaned internal and external threads
  
• Prevents corrosion in the thread
  
• Sealing up to bursting pressure
  

• Reliable sealing of hoses, cables and a refeed line for rainwater systems to prevent drafts and backwater in an empty tube
  
• Suitable for core boreholes and guard tubes with internal diameter 100 and 150 mm
  
• Corrosion-resistant thanks to V2A stainless-steel design
  

• Approvals:
  
• DIN-DVGW for gas to EN751-3 FRp and GRp and DIN 30660, testing up to 100 bar with gases of family 1, 2 and 3 and with hot water (NV-5143BP0261)
  
• Drinking water tested according to KTW recommendations of the German Federal Health Authority
  

• Eliminates water loss in drinking and industrial water pipes by up to 25 litres daily
  
• Pitting, cracks and leaky soldering points in copper, stainless steel, plastic and galvanised pipes can be sealed
  
• Crystallised in conjunction with external air
  

• High strength
  
• Gap up to max. 0.15 mm
  
• For Adhesive bonding of cylindrical parts and for fastening bearings
  

• Eliminates water loss in heating systems, boilers, pipelines, radiators, underfloor heating systems
  
• Seals all commercially-available materials (plastics and metals)
  
• Crystallised in conjunction with external air. A mechanical lock kicks in at the leak point. Sealing is permanent and resistant to ageing.
  

• Final strength in 6 - 24 hours
  
• Temperature resistance: -55°C to +150°C
  
• Max. gap [mm]: 0.3
  

• Due to its elasticity, suitable as a seal set for: Flue gas flaps, burner doors
  
• Temperature resistant: max. 1200°C
  
• Easy to cut with Shears or Cutter
  

• 150 ml spindle cartridge

- Wall duct of insulated pipelines, especially KMR pipes in district heating / district cooling- Corrosion-resistant due to V2A stainless steel design- Sealing rubber thickness: 2 x 40 mm- Temperature range: -30 to 120 °C- Pressure tightness: up to 3.0 bar ...

• For dirt- and moisture-tight sealing of the space between medium pipe and wall inner tube
  
• Inner tube ø: 135/110 mm
  
• Medium pipe ø: 0-100 mm
  

• Empty
  
• For hemp coils up to approx. 80 g

• Silicate-based sealant
  
• High temperature oven mastic for the assembly and installation of stoves, fireplaces, stoves, boiler systems and repair of cracks
  
• Does not shrink or crumble
  

• Ceiling core building duct holes and inner tubes that are not required
  
• Pressure tightness: to 1.5 bar
  
• Material: pressure plates/screws V2A, rubber EPDM
  

• High strength
  
• Gap up to max. 0.50 mm
  
• Quick metal with very high gap filling capacity
  

• For retrospective sealing of hemp-sealed internal gas pipes (DIN DVGW NG-5153BL0184)
  
• Plastic-solvent mixture
  
• The guidelines of the Worksheet DVGW-G 624 „Technical Regulations“ apply for processing, for subsequent sealing of existing internal gas pipes
  

• Difficult to dismantle
  
• Final strength after approx. 24 hours
  
• Temperature resistance: -55°C to +200°C
  

• Fire-Board, consists of biosoluble fibres, free from ceramic fibres
  
• Application temperature up to max. 1200°C
  
• Dimensions: 500 x 400 x 6 mm

• Material: brass
  
• External diameter: 33 mm
  
• May be permanently installed