Brands

• Protection class: IP65
  
• Impact resistance rating: IK08
  
• Socket: G13
  

• For Ceiling mounting of LED recessed light panel
  
• For converting recessed light to surface-mounted light
  
• Material: aluminium, white
  

- Protection class: IP20- Socket: GU4- Colour temperature: 2700 K- Input voltage: 12 V- Colour rendering index Ra: 80- Beam angle: 36°- Dimensions (ø x L): 35 x 38 mm- Not dimmable ...

• 1 whetstone
  
• Always a sharp Cutter in just a few strokes with optimum grinding angle
  
• Protective guard to prevent injuries
  

• Protection class: IP20
  
• Socket: E14
  
• Energy efficiency class: F
  

• Protection class: IP20
  
• Socket: G13
  
• Voltage: 220-240 V
  

• Protection type: IP65
  
• For indoors and outdoors
  
• Voltage: 220-240 V
  

• For concrete, screed
  
• Inner hole ø (mm): 22.3

• For copper pipes
  
• Bending angle up to 180°
  
• In plastic box
  

• Battery capacity (Ah): 2.0-5.0
  
• Idle speed (rpm): 3600
  
• Cutting depth (mm) at:
  - 90°: 47
  - 45°: 33
  

• Protection class: IP20
  
• Socket: R7s
  
• Colour temperature: 2700 K
  

• 1-component sealant based on hybrid polymer SMP
  
• Mould-resistant (microorganisms DIN ISO 846)
  
• Very good primerless adhesion to numerous substrates, even when exposed to water
  

• Container made from quality steel S 235 Jr
  - Outside: with rust protection coating
  - inside: enamelled according to DIN 4753.3
  
• Tank operating pressure: max. 8 bar
  
• Operating temperature: max. 95°C
  

• Clamp ring couplings for the flare-free connection of refrigerant lines to indoor and outdoor units
  
• A screw connection consists of a union nut, a support sleeve and a clamping ring
  
• PU = 2 pieces

- 2-component handle- Less weight and higher impact force- Hybrid head design: aluminium monoblock and forged steel- Partially hardened and tempered- With magnetic nail holder ...

• For cooling and Heaters
  
• Consisting of an outdoor unit and a wall-mounted indoor unit
  
• Indoor units compatible with Multi Split
  

- Hammerhead base- Plastic pressure tray made of PP- For vertical and horizontal mounting on C-profile rails- Slot width 16 - 17 mm- For indoor and outdoor installation ...

• Areas of application:
  - Fine grinding work in apparatus and container construction, machining of cast parts, moulds and Tools
  - Structuring, deburring, cleaning of metal, wood and plastic parts
  - Use on hand-held grinding machines
  
• Properties:
  - The flaps made of flexible abrasive cloth arranged radially around the plastic core allow optimum adaptation to the contours of the workpiece to be processed
  
• Note:
  - Coarse grit at high rpm has a finer effect, Fine grit at lower rpm has a coarser effect, observe permissible rpm

• Areas of application:
  - Pre- and post-processing of stainless steel and aluminium surfaces
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic parts
  
• Properties:
  - Abrasive fleece consists of non-woven nylon fibres in which the abrasive grain is evenly distributed
  - The elastic non-woven fabric adapts to any surface and enables consistent work results throughout the entire service life
  - Non-woven flap sanders are moisture-resistant and do not become clogged
  
• Note:
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!

• Areas of application:
  - Universal for seamless, shadow-free surfaces on metal, wood or plastic
  - Pre- and post-processing of stainless steel and aluminium
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic
  - Rough, medium and fine sanding

- Areas of application:- Universal for seamless, shadow-free surfaces on metal, wood or plastic- Pre- and post-processing of stainless steel and aluminium- Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic- Rough, medium and fine sanding ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, polyester fabric- For hard use on sharp burrs and edges- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Slanted mould- Special corundum, cotton fabric- With multiple embedded cooling layers- The Abrasive material does not clog and the sanding pattern remains free of discolouration or smearing- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

- High-quality, halide-activated, lead-free solder wire for manual and automatic soldering in electrical engineering, electromechanics and electronics- High wetting speed and spread on all surfaces commonly used in electrical engineering- No flux splashes on the assembly, system components or the us ...

- Flux for soldering copper and copper alloys in copper pipe installation, radiator construction, plumbing work, dip soldering, fitting manufacture and other soldering work- Yellowish white pasty ...

• For flux-free brazing of Copper pipes, especially in the Cold and air conditioning sector
  
• Silver-containing copper brazing alloys with phosphorus content for flux-free soldering of copper pipes in oil, gas and liquid gas installations as well as in Heating and drinking water installations with pipe dimensions over 28 x 1.5 mm.
  
• Rod size: 500 mm x 2 mm, square
  

• Load capacity: 600 kg
  
• Tubular steel, sectional steel, screw construction, powder-coated RAL 5007
  
• Platform/floor rigid sandwich panels with beech finish
  

• Load capacity: 600 kg
  
• Tubular steel, sectional steel, bolted construction, powder-coated RAL 5007
  
• Platform/floor rigid sandwich panels with beech finish
  

• For pallet size: 1200 x 800 mm
  
• Angled steel, welded construction with 4 catch corners, powder-coated RAL 5007
  
• 2 swivel castors and 2 fixed castors (swivel castors with brakes) EN1757-3
  

• Load capacity: 600 kg
  
• Tubular steel, sectional steel, welded powder-coated RAL 5007
  
• Platform/floor: rigid sandwich panels with beech finish
  

• For transporting or storing up to 8 tyres or 4 complete wheels
  
• Platform made from glass-fibre reinforced polypropylene
  
• With material tray for storing small parts
  

- Cable colour: black- Conductor cross-section: 6 mm²- Plug connector design: WM4 C / MC4 ...

- Protection class: IP65, when closed, IP2x open, IP67, IP68- Continuous operating temperature: -40°C to 85°C- Rated voltage: 1500 V DC- Rated current: 30 A- External cable diameter: 5.4 mm to 7.6 mm- Conductor connection cross-section: 4 mm² to 6 mm²- Cable type: EN 50618:2014- PU = 10 ...