GEKA®
- Sprinklers can be mounted directly on the slots
- No need to carry hoses back and forth
- Dimensions L x W x H: 480 x 270 x 265 mm
- Valves can be regulated and switched off individually
- Input: DN 20 (3/4”) IT
- Output:
- DIN 53505A
- Form 300 suitable for Geka plus only
- From approx. -20°C to +200°C
- Simple and intuitive operation with knobs
- Irrigation duration: 1 min to 120 min
- Watering intervals: from 1 to 12 h, 1 day, 2 days, 3 days and 7 days
- For garden irrigation, amateur use
- Material: PVC
- 5-layer structure
- Area of application: Fruit and vegetable growing, frost protection, forestry, sports and leisure facilities
- Material:
- Sprinkler: Brass
- Springs: Chrome steel
- Tripods: Galvanised steel - Prerequisite: DN 20 (3/4") hose, 2 bar minimum pressure
- For garden irrigation, agriculture, landscaping and construction industry
- Material: PVC
- 5-layer structure
- For the separate use of four water outputs at one water tap
- Valves can be individually regulated and switched off
- Nut thread: DN 20 (3/4") IT
- 1 spray type: Showers
- Infinitely variable flow rate regulation with permanent lock
- Robust aluminium/stainless steel design
- 5 spray modes (Showers, narrow spray, spray mist, full jet, flat jet)
- Infinitely variable flow rate regulation with permanent lock
- Robust aluminium/stainless steel design
- Suitable for mobile food and drink stalls, mobile vending carts, caravans and camping
- For the best-possible drinking water quality, the plug-in system should always be combined with hoses suitable for drinking water
- Compatible with all standard connector systems and hose types
Technical data:
Material: brass DIN 17660 and 50930/6
- Suitable for water, suction and pressure hoses
- 360° axial rotation
- Prevents hose torsion
- Suitable for water, suction and pressure hoses
- 360° axial rotation
- Prevents hose torsion
- Robust, powder-coated steel construction
- Automatic retraction of the Hoses (step-by-step locking possible)
- With hose protection and hose stopper
- Area of application: Fruit and vegetable growing, frost protection, forestry, sports and leisure facilities
- Material:
- Sprinkler: Brass
- Springs: Chrome steel
- Tripods: Galvanised steel - Regulated range and droplet size
- Claw spacing standardised 40 mm. Combinations with each other possible, also with all other GEKA models.
- Safety nubs ensure maximum safety and prevent automatic release of the coupling halves even when coupled and depressurised.
- Material: Brass CW617 N, DIN 17660 and 50930/6
- Claw spacing standardised 40 mm. Combinations with each other possible, also with all other GEKA models.
- Safety nubs ensure maximum safety and prevent automatic release of the coupling halves even when coupled and depressurised.
- Material: Brass CW617 N, DIN 17660 and 50930/6
- End pieces compatible with all GEKA models
- Claw spacing standardised 40 mm. Combinations with each other possible, also with all other GEKA models.
- Safety nubs ensure maximum safety and prevent automatic release of the coupling halves even when coupled and depressurised.
- Original GEKA plus quick-couplings
- Claw spacing standardised 40 mm. Combinations with each other possible, also with all other GEKA models.
- Safety nubs ensure maximum safety and prevent automatic release of the coupling halves even when coupled and depressurised.
- Designed for continuous use
- Locking bracket for continuous operation
- Jet type: from Fine spray to hard full jet
- Suitable for mobile food and drink stalls, mobile vending carts, caravans and camping
- For the best-possible drinking water quality, the plug-in system should always be combined with hoses suitable for drinking water
- Compatible with all standard connector systems and hose types
Technical data:
Material: brass DIN 17660 and 50930/6
- For water-saving irrigation of individual trees and shrubs
- Water saving up to 70%
- Can be laid above and below ground
- Material: Brass CW617N nickel-plated
- Compatible with all standard connector systems and hose types
- 15% larger flow compared with other standard systems
- Connection: GEKA plus bayonet connection
- Material:
- Basic body: Light metal
- Bayonet connection: Brass
- Plate: Light metal
- Protective ring: EPDM - Circuit board ø: 72 mm
- For garden irrigation, amateur use
- Material: PVC
- 5-layer structure
- Suitable for mobile food and drink stalls, mobile vending carts, caravans and camping
- For the best-possible drinking water quality, the plug-in system should always be combined with hoses suitable for drinking water
- Compatible with all standard connector systems and hose types
Technical data:
Material: brass DIN 17660 and 50930/6
- Connection: DN 20 (3/4”) ET
- Material: galvanised steel
- Continuously height adjustable from 700-1070 mm
Important ordering note:
- S 60 x 6 coarse thread with flat gasket
- Aluminium version
- DIN 53505A
- Form 300 suitable for Geka plus only
- Suitable for drinking water
- S 60 x 6 coarse thread with flat gasket
- Aluminium version
- Stainless, durable stainless steel construction 1.4301
- Automatic retraction of the Hoses (step-by-step locking possible)
- With hose protection and hose stopper
- For connecting 2 rainwater barrels
- Hole ø: 34-37 mm
- Scope of delivery:
- Hoses PVC DN 25 (1") Length approx. 25 cm
- 2 x hose nozzle brass DN 25 (1") ÜWM
- 2 x tank feed-through brass DN 25 (1") AG x DN 20 (1") IG
- 2 x stainless steel Hose clamps
- Ideal for use with Irrigation computers
- Valves can be individually regulated and switched off
- Inlet: DN25(1") ÜWM with adapter to DN20(3/4") IG
- S 60 x 6 coarse thread with flat gasket
- Aluminium version
- Material: Brass CW617N nickel-plated
- Compatible with all standard connector systems and hose types
- 15% larger flow compared with other standard systems
- Suitable for water, suction and pressure hoses
- 360° axial rotation
- Prevents hose torsion