WAGO®

• Protection class II
  
• Input voltage: 110 V A/C/230 V
  
• Nominal output voltage: 12 V A/C/24 V
  

• Rated current: 32 A
  
• Rated voltage: 400 V
  
• Rated impulse voltage: 4 kV
  

- Protection class: IPX8- Unlimited shelf life- Closure type: Latching- Gel material: Polyurethane- Working temperature: 0 - 40- UV-resistant ...

• Protection type: IPX8
  
• Unlimited shelf life
  
• Closure type: locking
  

• For solid conductors from 0.6 - 0.8 mm²

• 0.25 - 1.5 (2.5 „f") mm²

• 0.25 - 2.5 (4 “f”) mm²

• 0.25 - 2.5 (4 „f”) mm²
  
• 2002-3208 internally bridged
  - 2002-3231 with label holder

• 0.5 - 4 (6 „f") mm²

• 0.5 - 6 (10 “f”) mm²

• Rated current: 32 A
  
• Rated voltage: 450 V
  
• Max. continuous operating temperature: 105°C

• For screw fixing
  
• Colour: grey
  
• PU = 25 pieces

• With snap-on foot
  
• Colour: grey
  
• PU = 25 pieces

• For screw fixing
  
• No strain relief
  
• Colour: grey
  

• With snap-on foot
  
• No strain relief
  
• Colour: grey
  

• 0,25-2,5 (4 ?„f") mm²

• 0,25-2,5 (4 „f") mm²

• 0,25-2,5 (4 „f") mm2
  

• 0,5-16 (25 „f") mm²

• 10 mm wide

• Industrial Ethernet switch with auto negotiation and auto MDI/MDI-X detection at every port
  
• Easy to configure and install
  
• Suitable for small and medium-sized networks
  

• Fast and safe wiring of single-wire Ladders for low-current installations, e.g. in building communication, Detectors and bell, alarm and signalling systems. Strip, plug into the Clamps/terminals, done. Release: Hold the Ladders firmly, pull the Clamps/terminals off the conductor by twisting back and forth.
  
• Rated current: 6A
  
• Rated voltage: 100V
  

• Primary switched-mode Power supply, stepped profile for standardised installation in the distribution board, removable front panel and screw devices ideal for alternative installation in the system distribution board or device installation.
  
• Nominal input voltage AC: 100 to 240 V
  
• Input voltage range for AC: 85 to 264 V
  

• Primary switched-mode Power supply, stepped profile for standardised installation in the distribution board, removable front panel and screw devices ideal for alternative installation in the system distribution board or device installation.
  
• Nominal input voltage AC: 100 to 240 V
  
• Input voltage range for AC: 90 to 264 V
  

• Application examples
  
• Bathroom installation (DIN VDE 0100-701)
  
• Washing systems/irrigation systems
  

• Application examples
  
• Bathroom installation (DIN VDE 0100-701)
  
• Washing systems/irrigation systems
  

• Rated current: 32 A
  
• Rated voltage: 450 V
  
• For solid and stranded Ladders max 4 mm²
  

• Suitable for Series 221 10-conductor connection terminals
  
• PU = 10 pieces

• For DIN rail and screw mounting
  
• Rated current: 16 A
  
• Rated voltage: 250 V
  

• SmartPrinter for complete enclosure labelling, with labelling material
  
• Print resolution: 300 dpi
  
• Print width: 47 mm
  

• Systemvoraussetzung:
  
• Arbeitsspeicher: 4GB
  
• Unterstützte Betriebssysteme: Windows 7/8/10/11, Linux ®
  System requirements:
  

• 0,25-2,5 (4 „f") mm²
  
• N/L/PE

• Insulated

• 0,25-2,5 (4 ?„f") mm²

• Expandable: 5-5.2 mm
  
• Contents: 10 strips for 10 signs per unit