Bahco
- Practical, unbreakable, splinter-free bi-metallic blade
- Precision-ground teeth for all types of metal machining
- Back of blade made of flexible, resilient spring steel
- Blade tension 100 kg
- Light, two-component frame with steel core
- Alternative blade clamping at 55° for flush cuts
- Consisting of:
- Metal saw bow, saw blade length 300 mm with bi-metal saw blade
- 10 x bi-metal saw blade SANDFLEX 300 mm
- For fine to medium-coarse materials, in particular plywood, laminate and plastics
- Additional toothing on the curved back of the saw blade and slits from grooves on flat surfaces
- Number of teeth per inch: 12
- Load capacity: 3 t
- Lifting height (min./max.): 90/552 mm
- Dimensions (L x W): 830 x 364 mm
- 3/4” feed-through insert: Size 10/11/12/13/14/15/16/17/18/19/21/22/24 mm
- 3/4” feed-through ratchet with flexible head
- 3/4” socket wrench extension with hollow shaft
- 3/4" sockets: 10/11/12/13/14/15/16/17/19/21/22/24 mm- 3/4" through-head ratchet with flexible head, 72 teeth, 5° swing-back angle- 3/4" extension, 75 mm- In plastic case ...
- Folding lifting crane with 4 fixed extension positions of the lifting arm for 1000, 750, 500 and 250 kg- Double cylinder enables up to 50% faster lifting- Swivelling PU lever for easy and convenient pumping from any position- Dead man's safety device- Overload valve- Swivelling safety hook- Max. l ...
- For copper, aluminium and steel ...
- Corresponds to ISO 1174 and DIN 3120
- Alloyed high-performance steel
- Dynamic-Drive™ profile: protection against wear
- For perfect cutting of wood and plastic
- Length: 305 mm
- Tooth pitch: 13.5
- Blade tension 75 kg
- Slim design for places that are difficult to reach
- Handle supports the guide hand during sawing
- With two 8" round and one flat 6" chainsaw file
- For hard-to-reach places
- Includes Sandflex® bi-metallic blade
- Length: 250 mm
- T-crossbeam for lifting vehicles by the door sills for simultaneous wheel change
- Reduces the risk of bending the side sills
- Better stability of the raised vehicle
- For polystyrene, foam materials and other insulation and decorative materials
- Length: 400 mm
- With fine, precision-ground toothing
- Blade width: 18 mm
- Length: 161 mm
- Compartment for up to 3 blades
- 40 mm cutting capacity
- Blades with pulling cut made of high quality steel
- Locking system locks/unlocks with a quarter turn
- Ergonomic two-component handle
- Carbide blades
- For scraping off paint, glue, varnish and rust from any base surface, e.g. wood, metal and concrete
- Made of multilayer wood
- Saw guide: 45°, 90°
- Cutting widths up to 70 mm
- Fine triangular group toothing
- Specially for sawing wood
- Hardened and tempered quality steel
- - Ergo booklet
- Sides with rasp cut, edges with single cut
- For processing wood, plywood, building boards, plastics and other soft materials - Sides and edges tapered
- Wire cutting notch
- Blade made of carbon steel
- Composite handles