Bosch
- For cooling and Heaters
- Consisting of an outdoor unit and a wall-mounted indoor unit
- Eligible for subsidies according to BEG
- Flexible combination with all indoor units from the Climate 5000i M/ 3000i series
- Indoor units can be controlled separately via infrared remote control
- For combination with an outdoor unit CL 5000 M
- Material to be cut: Thick sheet metal (3-8 mm), solid pipes/profiles (ø ...
- For cooling and Heaters
- Consisting of an outdoor unit and a wall-mounted indoor unit
- Intelligent motion sensor
- For one or more tapping points
- Electronically controlled
- Air bubble detection
- Torque (Nm) max.: 63
- Torque pre-selection: Yes
- Brushless motor: Yes
- Material to be cut: Thin sheets (1.5-4 mm), pipes/profiles (ø ...
- Protection class: IP65
- Laser class: 2
- Working range (m): 20
- Material to be cut: Thick sheets (3-8 mm), solid pipes/profiles (ø ...
- Application: for cutting steel pipes, small diameter profiles and wood with nails
- Cutting length (mm): 205/280
- Consisting of:
- 5 x S 1122 EF: For cuts in sheet metal of 1.5 to 4 mm and pipes/profiles up to ø 175 mm
- 5 x S 1122 BF: For cuts in sheet metal of 3 to 8 mm and solid pipes/profiles up to ø 175 mm
- 5 x S 1122 VF: Vario toothing for cutting wood with nails/metal (<175 mm), metal sheets, aluminium profiles (3-10 mm), GFRP/epoxy (<175 mm)
- 5 x S 1617 K: HCS, cross set, ground, for cutting coarse wood, nail-free (<250 mm), removing living wood (ø <250 mm)
- Power (watts): 880- Idle speed (min-1): 0-900- Stroke rate (min-1): 0-4000- Impact energy (joules): 3.2- Motor brushless: No- Drilling with crowns (mm): 68- Drill ø concrete/wood/steel (mm): 28/30/13- Tool holder: SDS-Plus- LED light: No- Weight (kg): 3,1- Scope of delivery - Quick-action drill c ...
- Hygienic hot water temperatures of up to 65°C possible in heat pump mode
- Optimised use of own electricity possible through integration of Photovoltaics
- PV control contact already integrated in the appliance
- Magnesium anodes provide corrosion protection in the storage tank
- With additional electric heater (1.5 kW)
- High level of operating convenience via the LCD control panel
- Various operating modes selectable: Heat pumps only, electric only or booster function
- CS 5001 DW 200/260 C: With an additional heat exchanger for integrating Solar or other heat generators
- For monovalent operation
Type | 200 | 200 C | 260 | 260 C | |
EEK Hot water heater | A+ to F | A+ | A+ | A+ | A+ |
Heating capacity (A14/W55) | [kW] | 1.53 | 1.53 | 1.43 | 1.43 |
COP according to EN16147 (A7/W55) | 3.5 | 3.5 | 3.6 | 3.6 | |
Tap profile | L | L | XL | XL | |
Power of electric auxiliary heating | [kW] | 1.5 | 1.5 | 1.5 | 1.5 |
Memory content | [l] | 202 | 194 | 260 | 251 |
Refrigerant/filling quantity | [--/kg] | R513A / 1.1 | R513A / 1.1 | R513A / 1.1 | R513A / 1.1 |
Sound power level | [dBA] | 56 | 56 | 56 | 56 |
Water temperature max. | [°C] | 65 | 65 | 65 | 65 |
Air flow rate | [m³/h] | 420 | 420 | 420 | 420 |
Dimensions (ø x H) | [mm] | 630 x 1720 | 630 x 1720 | 630 x 2010 | 630 x 2010 |
Weight | [kg] | 105 | 121 | 110 | 128 |
Ref. no. | 7738340427 | 7738340428 | 7738340429 | 7738340430 |
- Maximum comfort through 100% tool-free accessory change
- Acoustic click signal when correctly mounted
- Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
- Battery capacity (Ah): 2.0 - 12.0
- Air flow (l/min): 2040
- Vacuum (mbar/kPa): 115 / 11.5
- Output (watts): 1150
- Idle speed (rpm): 170-340
- Stroke rate (rpm): 1500-3050
- Copper double pipe package with 1/4" and 3/8"
- Can be used with split Air-conditioning devices in nominal output sizes 2.5 and 3.5 kW
- Insulation in accordance with EN 13501-1
- Flexible combination with all indoor units from the Climate 5000i M/ 3000i series
- Indoor units can be controlled separately via infrared remote control
- For combination with an outdoor unit CL 5000 M
- PU = 2 pieces ...
- Area of application: soft concrete, soft tiles, wood, plastic, thin sheet metals and aluminium
- Shaft: cylindrical
- Design: easy drilling with Carbide tip
- Area of application: Can be used for drilling holes in wood, drywall, building blocks, plastics, metals, non-ferrous metals, stainless steel, abrasive materials and soft tiles
- Design: Carbide with 20 times longer service life
- Consisting of:
- PowerChange/PowerChange Plus adapter with 11 mm hexagon socket
- Centring drill, ø 8.5 mm, length 105 mm, with hexagon holder 6.35 mm (1/4"), ø 7.15 mm, length 105 mm, with hexagon holder 6.35 mm (1/4")
- Hole saw dia. (mm): 22/25/35/40/51/68, length 60 mm
Bit sets consisting of:
- Suitable for Bosch: GC5300iW/MA 14/17/20/24/30, GW5800iW14/24, GC7800IW/IWM 20/24
- Ref. no.: 8 737 711 853
- Scope of delivery:
- Electrode block
- Seal sets
- Protection type: IP 53
- Infrared resolution: 160 x 120 pixels
- SuperResolution function (processing to 320 x 240 pixels): no
- Cordless sabre saws and special saws, 18 V
- Idle stroke rate (min-1): 0-2900
- Lifting height (mm): 28
- Battery capacity (Ah): 2.0-4.0- Torque (Nm) max.: 30- Torque pre-selection: Yes- Drill ø wood/steel (mm) max.: 19/10- Screw ø (mm) max.: 7- Chuck clamping range (mm): 1-10- Weight (kg): 1.0- Scope of delivery - Battery/Ah: 2 x 2.0 - Charger: Yes - Tool bag: Yes ...