DeWalt

• For all base, intermediate and final sanding applications involving wood, paint, varnish and metal
  
• 8 holes
  
• PU = 10 pieces

• For wood, plastic and aluminium

• Suitable for wet and dry vacuum cleaner, M-class (72 001 39)
  
• PU = 5 units

• Output (watts): 1700
  
• Idle stroke rate (rpm): 3000
  
• Stroke length (mm): 40
  

• Cutting length: 430 mm
  
• For simple cuts in perforated brick, for example, Poroton®, Porotherm®, Unipor® to strength class 20 N / mm2

• With three white LEDS and one red LED
  
• Incl. metal hooks for hanging
  
• Lamp head can be adjusted to 9 positions
  

• 8 mm shank (suitable for 80 835 67)
  
• 22-piece set in plastic box consisting of:
  - Grooving cutters: 6,8,10,12,16,20 mm, working length 20 mm
  - Tine milling cutter: ø =14.3 mm, 14°
  - Grooving cutter: ø = 8 mm, radius = 4 mm
  - Flute milling cutter: ø = 12 mm radius = 6 mm
  - V-groove milling cutter: ø = 12.7 mm, 60°
  - V-groove milling cutter: ø = 12.7 mm, 90°
  - Quarter round end mill: ø = 21 mm, radius = 5 mm
  - Profile milling cutter with thrust ball bearing: ø = 22.22 mm, radius = 3.2 mm
  - Chamfer milling cutter with thrust ball bearing: ø = 28.7 mm, 45°
  - Rounding cutter with thrust ball bearing: ø = 22.7 mm, radius = 5 mm
  - Rounding cutter with thrust ball bearing: ø = 28.6 mm, radius = 8 mm
  - Chamfer milling cutter with thrust ball bearing: ø = 19.9 mm, 22°
  - Flush milling cutter with thrust ball bearing: ø = 12.7 mm, working length 25.4 mm
  - Profile milling cutter with thrust ball bearing: ø = 27 mm, radius = 4 mm
  - Revelling cutter with thrust ball bearing: ø = 19.5 mm, radius = 5 mm
  - Rebate milling cutter with thrust ball bearing: ø = 25.5 mm, radius = 8 mm
  - Rebate milling cutter with thrust ball bearing: ø = 31.8 mm, working length 12.7 mm

• Power (watts): 1100
  
• Rated voltage (V): 230
  
• Idle stroke rate (min-1): 0-2800
  

• Battery capacity (Ah): 1.5-5.0
  
• Air flow (l/min): 540
  
• Vacuum (mbar/kPa): 95
  

• For cutting hardwood, melamine, softwood, plywood and cladding
  
• Suitable machines: mitre saws

• Protection type: IP 40
  
• Measurement function: lengths, surfaces, volumes
  
• Measurement accuracy (mm): ± 3 mm at 10 m
  

• Suitable for fast surface processing and high material removal rate with brick, masonry and concrete

• Suitable for brush cutter attachment 80 240 38 and for lawn trimmer attachment 80 240 37 in combination with Cutter adapter set 80 240 44
  
• For thinning and clearing tough grass and undergrowth, cutting back thorny hedges
  
• ø (mm): 200

• Output (watts): 2600
  
• Nominal voltage (V): 230
  
• Idle speed (rpm): 6500
  

• Cutting circle ø (mm): 380
  
• Thread (mm): 2

• Cutting of stainless steel
  
• Disc ø (mm): 125
  
• Disc thickness (mm): 1
  

• Battery capacity (Ah): 1.5-5.0
  
• Idle speed (rpm): 16000-25500
  
• Adjustable rotational speed: yes
  

• Cutting length (mm): 550
  
• Tooth spacing (mm): 19
  
• Can be swivelled up to: 135°

- Battery capacity (Ah): 2.0- Torque (Nm) max.: 57.5- Torque pre-selection: Yes- Motor brushless: Yes- Drill-ø wood/steel (mm) max.: 20/10- Screw ø (mm) max.: 10- Drill chuck clamping range (mm): 1.5-10- Weight without/with battery (kg): 0.84/1.1- Scope of delivery: - Battery/Ah: 2 x 2.0 - Charger ...

• Output (watts): 1675
  
• Nominal voltage (V): 230
  
• Idle speed (rpm): 4000
  

• Battery capacity (Ah): 1.5-5.0
  
• Max. torque (Nm): 95
  
• Idle speed (rpm): 0-2000
  

• For pole pruner attachment DCMASPS5 80 240 39 and hedge trimmer attachment DCMASPH6 80 240 40

• Consisting of:
  - Slotted: SL6/SL8
  - Phillips: PH1/4xPH2/PH3
  - Pozidriv: PZ1/6xPZ2/3xPZ3
  - Torx®: T10/T15/T20/4xT25/2xT30
  - Phillips: PH2, 50 mm
  - Pozidriv: PZ2, 50 mm
  - Torx®: T25, 50 mm
  - 1 x Magnetic Bit holder
  - 1 x magnetic Bit holder with guide sleeve