eckerle
- With electro-magnetic piston rotary actuator, float/control and safety device, built-in suction filter
- Pipe connections for pipe ø 8 x 1, fully wired with Schuko plug, mounting strip
- Integrated oil collection vat with self-ventilation and electronic fault circuitry
- For transporting condensate from air conditioning systems
- For Air-conditioning devices up to 7.5 kW
- Dirt-resistant valve design
Technical data:
- For delivering condensate from gas condensing boilers, air conditioning systems and refrigerated counters
- Pump unit also suitable for use in external sumps, tank height min. 62 mm max. 70 mm
- Integrated non-return valve
Technical data:
- Intended for supplying automatic oil burners in suction intake mode
- The heating oil is induced up to a max. suction height of 7 m and the 8-litre filling storage tank is filled up automatically
- Do not install non-return valve into suction pipe, as it is already available in the pump
- Electromagnetic, with float module
- For conveying condensate from air conditioning and ventilation units
- With dirt-resistant valve design
- Replaces pumps SK8, SK9E, FP6 und FP8E
- Electronic switching allows you to choose between continuous operation for supplying oil ovens (SK9E), and operation synchronised with the consumer (FP8E). You can choose between 4 operating speeds for the desired pumping power.
- The pumping station consists of an electromagnetic piston pump
- High-performance internal gear pump
- Electric motor
- Float, control and safety devices
- A suction pump that operates in a closed circuit for oil-fired fan burners
- Facilitates 100% odourless oil supply
- With electromagnetic piston pump, safety device, suction filter and non-return valve
- Suitable for oil* and gas-fired condensing technology up to 25 kW
(*With active carbon brush set for use in oil-fired condensing systems)
Features: - Noise reduced electromagnetic piston pump
- Floating switching contact, can be loaded up to 10 A/230 volt
- Electromagnetic, with float module
- For conveying condensate from air conditioning and ventilation units
- With dirt-resistant valve design
- With a piston rotary actuator, a path-dependent control and safety device, manometer, a device for quick drainage via the suction pipe, air processing, suction filter built
into the oil-level glass - Pipe connections ø 8 x 1
- Fully wired with Schuko plug and mounting strip
- Fully connected safety overflow protection in the form of a special additional power cord with built-in fault lamp and acoustic signal (horn)
- For delivering condensate from gas condensing boilers, air conditioning systems and refrigerated counters
- Pump unit also suitable for use in external sumps, tank height min. 62 mm max. 70 mm
- Suitable for oil* and gas-fired condensing technology up to 25 kW
(*With active carbon brush set for use in oil-fired condensing systems)
Features: - Noise reduced electromagnetic piston pump
- Floating switching contact, can be loaded up to 10 A/230 volt
- Suitable for eckerle: Suction pump units for SP 32-01
- Ref. no.: 118770
- Scope of delivery:
- O-ring
- Suitable for pumps with alarm contact
- Ready to plug in
- With internal gear pump,
- The pump fills a 5 l diaphragm tank in tank loading mode
- Control works depending on pressure, and has and oil shortage and pipe breakage fuse, as required in EN 12514
- Suitable for Eckerle: Suction pump unit SP 32-03
- Ref. no.: 492268
- Suitable for Eckerle: Pressure storage unit DSA 100
- Size: 11 x 24 mm
- Thickness: 5 mm
- Suitable for Eckerle: Suction pump unit SP 8
- Ref. no.: 1121180015
- Suitable for Eckerle: Suction pump unit SP 8
- Ref. no.: 0707030011
- Suitable for Eckerle: Pressure storage unit KD10
- Ref. no.: 110048
- Suitable for Eckerle: Pressure storage unit KD10
- Ref. no.: 411959
- Suitable for Eckerle: Pressure storage unit DSA 100
- Connection: Cutting ring ø 10mm
- Ref. no.: 5357550009
- For conveying condensate from oil condensing boilers
- Scope of delivery:
- 1 x activated carbon 500 g
- 1 x insertion sieve