Eibenstock
- Application: reinforced concrete, masonry- Mounting: 1 1/4- Length (mm): 450 ...
- Area of application: MasonryConsisting of:- Quick-release screw- wing nut- Washer- 1 x drive-in plug ø (mm): 18, M 12 ...
- Power (watts): 2200
- Idle speed (min-1): 0-2500
- Adjustable rpm: Yes
- Output (watts): 2200
- Nominal voltage (V): 230
- Idle speed (rpm): 0-2500
- Output (watts): 3000
- Idle speed (rpm): 230-1030
- Wet drilling/dry drilling: yes/no
- Power (watts): 1400
- Idle speed (min-1): 8000
- Grinding disc-ø x bore (mm): 125 x 22.23
- Suction ring is sucked onto the floor or wall by the negative pressure generated by the suction cup and simultaneously extracts the cooling water- Water collection ring can also be used as a dust extraction system during dry drilling ...
- 2.5 m hose with Quick-Click function for all common plug-in systems
- Output (watts): 2500
- Idle speed (rpm): 360/850
- Adjustable rotational speed: yes
- Hose ø: 35 mm
- Application: reinforced concrete, sand-lime brick- Mounting: 1 1/4- Length (mm): 350 ...
- Output (watts): 2500
- Idle speed (rpm): 675
- Rotational speed adjustable: no
- Output (watts): 1500
- Nominal voltage (V): 230
- Idle speed (rpm): 3700
- Power (W): 1400
- Vacuum (mbar/kPa): 270/27
- Container capacity (litres): 25
- Power (watts): 2200
- Rated voltage (V): 230
- Adjustable rpm: Yes
- Faster stripping with centre slot spacer disc set for three diamond cutting discs (80 038 27)
- Output (watts): 2300
- Idle speed (rpm): 3100
- Battery capacity (Ah): 5.2
- Idle speed (rpm): 0-8000
- Max. drill ø with solid drill bits (mm): 20
- Mounting: 1 1/4" ...
- Application: Concrete, stoneConsisting of:- Dowel setting tool- quick-action clamping screw- wing nut- washer- 10 x drive-in dowel ø (mm): 16, M 12 ...
- Power (watts): 1400
- Idle speed (min-1): 8000
- Grinding disc-ø x bore (mm): 125 x 22.23
Suitable for: adhesive mortar, ready-mixed mortar, screed, paste, tile adhesive, fillers, granulates/plaster ...
- For drilling crown 1 ¼” / ½”
- Drilling crowns that are jammed in concrete or masonry can be released with the help of the drilling crown extractor
- Drilling core can be removed from the drilling crown pipe without damaging the drilling crown
- Application: reinforced concrete, masonry- Mounting: 1 1/4- Length (mm): 450 ...
- Mounting: M 16 internal thread- Only in combination with dust extraction 72 001 99 or mounting shaft 80 852 24 ...