EURO-LOCK®
- For checking leaks
- Corrosion protection
- DVGW-approved (only 73 008 65)
- Protects, lubricates and maintains plastic, rubber and metal for good sliding effect
- Impregnated without greasing
- Creates a long-lasting lubricant and release film
Technical data:
- Acrylic resin lacquer with intensive durable luminous pigment
- Lead-free, aromatics-free, cadmium-free, not petrol-resistant
- Blowing agent: Propane-butane
- Special grease for highest pressures
- Colour: grey-black
- Temperature range: -30°C - +130°C
- For faster curing of anaerobic adhesives and sealants
- For passive surfaces, large gap widths and low ambient temperatures (around 0°C)
- Used for thorough degreasing of all metals
- Removes oil and grease-containing soiling and dissolves resinous residues
Technical data: - Form: aerosol
- For cleaning tools and other parts
- Use undiluted
Technical data: - Appearance: Liquid, colourless
- For removing tar stains, oil and grease from motor vehicles
- Rub in with a dry, lint-free cloth after a short exposure time
Technical data: - Form: aerosol
- Black, friction-reducing high-pressure grease for heavily stressed lubrication points
- Contains anti-wear and extreme pressure additives, antioxidants, corrosion inhibitors and graphite
- Very good adhesion, water-resistant, oxidation-resistant and walk-stable
- Non-drip
- Resistant for a long period, odourless and tasteless
- Adhesive and drip-proof
- Removes stubborn insect residues on glass and chrome parts
- Depending on the degree of soiling, dilute with water up to 1:5 over large areas
- pH value(10g/l deionised water): approx. 11.4
Technical data:
- Re-greasing with paint- and skin-friendly properties
- Diluted with water up to 1:50
- pH value: 7.5
Technical data:
- Designed for machining
- Compatible with all ferrous and non-ferrous metals
- Contains no chlorine, added sulphur, nitrite
- For the lubrication of sliding points exposed to high pressure and high temperatures
- Also used as a running-in and Assembly pastes for extreme loads (high pressures, high temperatures)
- The solid lubricant MOS2 it contains protects against running-in damage and provides good emergency running properties
- Final strength after approx. 24 hours
- Temperature resistance: -60°C to +200°C
- Viscosity [mPa·s] at 25°C: 3,500 - 5,000
- Provides long-term exhaust system protection from corrosion
- Also in oven and heating construction
- High level of heat resistance (black up to +600 °C, silver up to +900 °C)
- Final strength after approx. 12 hours
- Temperature resistance: -55°C to +50°C
- Viscosity [mPa·s] at 25°C: 1.500-6.500
- A universally applicable lubricating oil for all machine tools, motors, measuring instruments, spindles, joints, roller and plain bearings, hinges and much more.
- Very creep-resistant, displaces moisture, makes seized parts workable again, protects against corrosion and extends lubrication intervals
Technical data: - Form: aerosol
- For removal from canisters
- For long-term lubrication for slow and high-speed bearings
- Temperature range (°C): -+30 - +130
- With flexible tube
- Shrinkage-free filling
- Quickly removes brake dust and oil residues as well as road dirt on all light alloy and steel rims
- For heavy soiling
- Does not corrode rubber and plastics
Technical data:
- Versatile, Vaseline-type silicone grease with excellent insulating properties and a wide temperature range
- High temperature resistance, chemical neutrality (indifference)
- Excellent dielectric behaviour; radiation resistant
- Final strength after approx. 12 hours
- Temperature resistance: -55°C to +50°C
- Viscosity [mPa·s] at 25°C: 900 - 1,500