F-tronic
- For mounting on lever and flush-mounted device plug (order no.: 62 010 74 and 62 010 75)
- Material: PS
- Colour: Red
- Reliable location of pipes in closed walls
- Centring of the hole for setting the device sockets
- No damage from search holes in cavity walls, C-profiles and insulation materials
- Suitable for:
- Cavity wall distributor 60+10ST
- JUMBO 60+10/60K/60KW
- Flush-mounted distributor 60+10ST
- Required for various energy consumers to install the meter
- Suitable three-phase current pins order no.: 62 024 64
- Suitable sealing cap order no.: 62 024 65
- Fitted and wired
- 5-pin
- According to technical connection conditions of the distribution system operator, with mounted devices
- Suitable for:
- Cavity wall distributor 48+8ST
- JUMBO 48+8/48K/48KW
- Flush-mounted distributor 48+8ST
- Can be flexibly combined with all flush-mounted sockets (f-tronic)
- With side wiring space
- 20 and 25 mm pipe entry
- Cleaning lid to protect the inside of the can
- Multiple use
- Glow wire test: 650°C
- Suitable for order no.: 62 024 63
- With screws
- Suitable for small distribution board door Vision
- With 2 keys
- Protection type: IP30
- For laying network cables in accordance with DIN EN50173
- Cable entry: 3 x
- For halogen-free cavity f-tronic wall sockets
- PU = 25 units
- Protection type: IP30
- For laying network cables in accordance with DIN EN50173
- Cable entry: 3 x
- Protection Type: IP30, VDE
- Size: ø 68 mm
- 4 x 2K membrane entry
- Protection Type: IP30
- For installing EIB modules, relays or NV transformers to 48 mm installation height
- With pipe support 25 mm, 4 screw mandrels and 2 device screws
- Fits Vision/surface-mounted small distributor
- Material: sheet steel, powder-coated
- With snap closure
- Fits Vision/surface-mounted small distributor
- Material: sheet steel, powder-coated
- With snap closure
- For labelling cable, pipe and combined penetration seals
- For boxes with screw spacing 60 and 70 mm
- ø: 92 mm
- Colour: white
- Protection type: IP54
- 12 self-sealing entries
- Material: polyethylene
- Protection type: IP30
- Suitable for panel thickness: 5-40 mm
- Glow wire test: 850°C
- Suitable for:
- Cavity wall distributor 36+6T
- JUMBO 36+6/36K/36KW
- Flush-mounted distributor 36+6ST
- Fitted and wired
- 5-pin
- According to technical connection conditions of the distribution system operator, with mounted devices