fermit
- Permitted for gas, drinking water pipes (warm and cold), as well as for heating systems in domestic installation
- In conjunction with hemp for metallic thread connections
- -20°C to +130°C
- According to DIN EN 751-3- For fine and coarse threads- Fine thread FRp - colour white- Coarse thread GRp - colour yellow- Thickness x length = 0.1 mm x 12 m- Width: 12 mm- Approvals: DIN/DVGW, KTW-BWGL, KIWA, BAM / OXYGEN, WRAS- Temperature range: -200°C to +260°C ...
- Permanently elastic
- Plastic-based
- Temperature-resistant
- Suitable for foodstuffs
- Temperature range: -20°C to +140°C
- Effective corrosion protection
- Lubricating grease for drinking water fittings, e.g. cartridges of single-lever mixers, switching valves and swivel outlets
- Temperature range: -40°C to +200°C
- O-ring-compatible (NBR, EPDM)
- For holding parts soiled with oil (e.g. removed oil filters, used oil cloths, oil hoses and pumps of various types, oil binding agent)
- Capacity: 5 L
- Colour: yellow
- Suitable for: Water, gas, steam, compressed air, oils, chemicals, oxygen and more.
- Temperature range: - 240°C to +260°C
- Doesn’t swell or stick
- Reliably eliminates blockages and smells from draining, washing, toilet and urinal basin drain valves, as well as blockages in drain pipes
- Also thaws frozen drain pipelines
- Content: 1 kg
- Approvals:
- DIN-DVGW for gas to EN751-3 FRp and GRp and DIN 30660, testing up to 100 bar with gases of family 1, 2 and 3 and with hot water (NV-5143BP0261)
- Drinking water tested according to KTW recommendations of the German Federal Health Authority
- Neutral-curing
- Very effective adhesion to materials such as metal, glass, concrete, ceramics, acrylic, etc.
- Resistant to high temperatures
- Approvals for:
- DIN-DVGW for gas according to EN751-3 FRp and GRp and DIN 30660, test up to 100 bar with gases of the 1st, 2nd and 3rd family and with hot water (NV-5143BP0261)
- Drinking water test in accordance with KTW recommendations of the Federal Health Office
- Suitable for all standard cartridges
- Bend and twist canula
- With cap
- Silicate-based sealant
- High temperature oven mastic for the assembly and installation of stoves, fireplaces, stoves, boiler systems and repair of cracks
- Does not shrink or crumble
- For solar installation. May not be used for gas or drinking water systems in home installation!
- Does not dry
- Immediate sealing
- Suitable for sealing wall fitting in plumbing applications
- Prevents the penetration of moisture in masonry, plaster, drywall, etc.
- Quick and clean
- TA-, BAM- and DVGW-tested
- Temperature resistant from -240°C to + 260°C
- Chemically stable in the entire pH range
- For boilers, boiler elements, ovens and stoves
- For assembly and sealing
- Flameproof up to 1000°C
- Ready-to-use seal and fastening glue
- Intended use:
- Adhering sealing cords (glass fibre, ceramic) to cast iron
- Mounting fireclay bricks in furnaces or heating systems
- Fastening insulation plates - Asbestos-free
- Heat-resistant
- Protects from rust
- From seals on flanges and surfaces becoming stuck, as well screws and bolts etc. that are exposed to strong heat
- Tough elastic, can be easily kneaded
- Particularly high adhesive strength
- Can also be detached after a longer period without risk of breakage
- Suitable for all standard cartridges
- Up to 200 mm more range (2 x 100 mm)
- PU = 2 pieces
- For joining soft (PVC) and rigid (PVC-U)
- Resistant to water treatment agents for pools, salt and sea water
- Suitable for pressure lines with a diameter of up to 100 mm
- Ready to use for all types of repairs
- Easy to apply
- Processing time approx. 30 - 120 minutes