Geiger
Multiple variants
Brush cleaner + colour remover NR 12
Immediately available
- Emulsifies Coatings, emulsion paints, Greases and Oils. As a paint remover: Spray on paint stains on solvent-resistant substrates (e.g. mineral substrates, wood, ceramics, glass, etc.) or cover with a damp cloth and leave to work. Then remove the dissolved colour. Not suitable for painted or varnished surfaces.
Biodegradable - Biodegradable
- Application ratio: undiluted
Multiple variants
Cement residue remover + limescale remover NR. 15
Immediately available
- For Cleaning and removing limescale and cement residues, inorganic soiling and flash rust, also in combination with oily and greasy soiling. For Cleaning acid-resistant substrates such as wall and floor tiles, brick and clinker surfaces, porcelain stoneware in sanitary facilities, swimming pools, kitchens, car washes, clinker facades. Check compatibility when used on Bath fittings.
- Degreasing, strong protective solvent
- Application ratio: depending on soiling, dissolve 1:1 to 1:15 with water
New
73 023 38
Colour additive highly concentrated NR. 10,100ml bottle
Immediately available
- Against mould and bacteria for 100% fungicidal (fungicidal) treatment of all water-dilutable paints, including Coatings, dispersions, facade paints, synthetic resin plasters, etc. and as a mould-preventative agent in wallpaper paste
- Suitable for food processing companies
- Fungicidal (fungicidal) property
Multiple variants
Dispersion stain remover NR. 05
Immediately available
- Removes all paint stains, emulsion paints, Coatings and oil paints from all solvent-resistant surfaces such as masonry, wood, glass and textile floors, even if they are already completely dry. For plastic surfaces and painted surfaces, compatibility must be checked on an inconspicuous area.
- No solvent regeneration, therefore can also be used on Work clothing and textile floors.
- Application ratio: undiluted
Multiple variants
Finishing paste + glaze remover NR. 03
Immediately available
- For removing old paints and coatings on solvent-resistant substrates such as wood, plaster surfaces, metals, concrete, etc. Also for removing glazes (especially thin-layer glazes). Can also be used for old coatings and special 2K Coatings.
- Short exposure time, no Covers required
- Pasty, therefore also easy to use on vertical surfaces
Multiple variants
Graffiti Cleaner NR. 23
Immediately available
- Dissolves spray paints, colours and felt-tip pens, making them easy to remove
- Infiltrates all solvent-resistant substrates, such as metal, glass, wood, tiles, unpainted concrete, clinker, natural stone and artificial stone
- Short exposure time, biodegradable
Multiple variants
Insulation-Multi-fluid NR. 08
Immediately available
- Insulates and neutralises substrates containing lime and cement. Prevents the penetration of water, alkalis and acids. Isolates stains from water marks, smoke, soot and nicotine stains. Strengthens old and new plaster. Against efflorescence on masonry and plaster, combats mould growth and dry rot. Neutralisation of active lime and cement plaster (important for dispersion coatings to prevent colour changes, especially with silicate coatings).
- Combination of fluate salts = wide range of applications = Insulating, impregnating and priming
- Biodegradable
Multiple variants
Leach NR. 01
Immediately available
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable by saponifying the surface. Also suitable for removing wax from wall surfaces.
- High roughening effect, therefore no sanding required!
- Mixing ratio: 100 g to 1 litre of water
Multiple variants
Leaching agent + degreaser NR. 34
Immediately available
- For thorough substrate pre-treatment before repainting heavily soiled ceilings and walls due to nicotine, Grease and soot. Makes all old substrates (e.g. Coatings) clean, non-slip, matt and stable through surface saponification. Particularly suitable for subsequent water-based Coatings & paint systems.
- Degreasing, high surface saponification
- High roughening effect, therefore no sanding required!
Multiple variants
Mould remediation solution NR. 17
Immediately available
- For the substrate treatment of mould, green and algae-infested surfaces before subsequent coats of paint. Can be used both indoors and outdoors
- Permanent destruction of residual spores in the substrate of mould, green and algae coatings
- Aqueous solution = penetrates deep into the substrate
Multiple variants
Mould-STOP NR. 09
Immediately available
- Disinfects and removes mould, green and algae infestation from indoor and outdoor surfaces
- Suitable for floors in sanitary areas and on mineral substrates such as brick, concrete, plaster, facades and gravestones
- Not suitable for fabrics, metals and green plants as the product contains chlorine (risk of bleaching)
Multiple variants
Saltpetre remover NR. 25
Immediately available
- Removes efflorescence (saltpetre etc.) on natural stone, clinker, brick, concrete and plaster. Covers acid-sensitive surfaces (e.g. marble, artificial stone)
- Application ratio: apply undiluted
- Consumption: 120-150 ml/m²
Remove loose layers and dry brush off heavy efflorescence. Spray onto the efflorescence or apply with a Sponges or ceiling brush. After a reaction time of 10-15 minutes, rinse with clear water.
New
73 023 53
Silicone grout remover NR. 29, 200 ml
Immediately available
- Preferred areas of application are bathrooms, kitchens, window (construction), tiles, expansion joints, etc. The silicone grout remover can be used to easily remove silicone grout residue from glass, ceramics, metals and numerous plastics such as plastic bathtubs and shower trays
- Pasty, therefore also easy to use on vertical surfaces
- Application ratio: undiluted
Multiple variants
Universal cleaner Profi NR. 14
Immediately available
- Biodegradable cleaning concentrate for all washable surfaces
- Cleans heavy and difficult to remove soiling of all kinds without etching and thus preserves the natural shine of the surface
- Removes all soiling and has a 100% degreasing effect
Multiple variants
Wallpaper protection NR. 02
Immediately available
- As a solvent-free coating to protect all wallpapers, wall paints and natural stone. Only suitable for indoor use. Makes all wallpapers, emulsion paints etc. washable and scrub-resistant. Wallpaper protection dries matt. Breathability is slightly restricted.
- Matt gloss level, does not yellow (lightfast)
- Application ratio: undiluted
Multiple variants
Wood bleaching powder OXYD NR. 06
Immediately available
- For lightening and removing discolouration from all types of wood. Old and blackened wood becomes like new again and regains its natural colour. Lye residues (e.g. from paint strippers etc.) can be neutralised with this product. Removes sweat marks in the sauna.
- Fungicidal (fungicidal) property
- Preparation ratio: Dissolve 100 g in 800-1000 ml (warm) water
Multiple variants
Woodchip wallpaper stripper NR. 19
Immediately available
- Removes all woodchip wallpaper even without the use of a spiked roller, sandpaper, etc.
- Suitable for removing multi-coated wallpapers and wallpapers that are difficult to remove, such as textile and vinyl wallpapers
- Extremely high removal power, no run-off on the wallpaper