GOK

• Consisting of two cutting ring fittings with sealing rings and two support sleeves
  
• for GOK anti-siphon valves

• Both sides DN 8 (1/4") LH - union nut
  
• Resistant to temperatures down to -30°C
  
• PS 10 bar
  

• Overpressure safety device S2SR for protecting the consuming devices from impermissibly high pressure
  
• Viewing display (green/red) with visual signal (red) in the event of output pressures over 80 mbar
  
• Thermal shut-off device for automatic shut-off of the gas flow in the event of a rise in temperature to over 100°C
  

• straight screw-in, tapered thread,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• A union nut on one side,
  a cutting-ring connection on the other
  
• DN 8 (1/4") LH - union nut x RVS 8
  
• Resistant to temperatures down to -30°C
  

• For connection to gas cylinders, for pressure regulation based on nominal pressure
  of the gas appliance
  
• KLF x T 1/4 LH-KN
  
• Outlet pressure: 30 mbar
  Consisting of:
  

• Consisting of one cutting ring fitting with sealing ring and one support sleeve

• Hose breakage protection devices prevent excess gas from escaping in the event of damage or hose loosening and close up the passage of gas as soon as the prescribed operating quantity is exceeded max. 10% above the nominal flow rate.
  Fitted between controller and hose. Commercial for hoses >400 mm and private >1500 mm. Exclusively for outdoor use.
  A small amount of gas provides pressure equalisation, causing the hose breakage protection to
  open automatically.
  
• Nominal flow rate: 1.5 kg/h
  
• DN 8 (G ¼) LH union nut x DN 8 (G ¼) LH-KN
  

• For connection to liquid gas cylinders up to 14 kg
  
• KLF x DN 8 (1/4”) LH-KN
  
• Outlet pressure: 50 mbar
  

• According to DIN 3870
  
• With O-ring seal for cutting ring fittings in accordance with DIN 2353 / DIN EN 8434-1
  
• Series L

• For connecting fittings,
  pipes to compression fittings
  
• Connections:
  DN 8 (G 1/4“) LH union nut x pipe support 8 mm
  
• Resistant to temperatures down to -30°C
  

• galvanized, straight coupling,
  with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.
  * With steel cutting ring

• With V/SV contour
  
• As a junction to cutting-ring connection

*LB = large bottle connection ...

• Galvanised

• TV = T-screw connection
  
• Galvanised
  
• With brass cutting ring

• Material: steel
  
• For Cu pipes
  
• Series L
  

• Type 285
  
• Normally closed
  
• Size: DN 15 (G 1/2") i
  

D = steel cutting ring ...

brass ...

• With insulation piece
  
• With shut-off valve
  
• Thermal shut-off device “T” (TAE) for automatic shut-off of the gas flow in the event of a rise in temperature to over +100°C
  

• For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
  
• Conformity:
  - Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate GGV
  
  Note:
  The dimensioning and design of the LPG system (selection of gas flow monitor, nominal flow rate, nominal diameter, etc.) must be carried out in accordance with TRF.
  
  Technical data:
  
• Max. inlet pressure: 16 bar
  

• For direct connection to liquid gas bottles up to 11 kg
  
• PN 16
  
• Output 1.5 kg/h fixed
  

• Brass screw connection
  WEV = Elbow screw-in connection
  
• Conical thread
  
• Galvanised