Heco
- Galvanised steel
- Screw is inserted into the bore hole directly without a dowel
- Approved for brick, solid sand-lime brick, perforated sand-lime brick and lightweight concrete
- SW: 13- Internal thread: M 8/10- Thread dia.: 7.5 mm- Drill hole dia.: 6.0 mm- Length: 40 mm- Fully threaded: Screw connection possible without dowel, absorption of high tensile forces, high contact pressure- Galvanised: Blue passivated. For outdoor use without direct weathering, but no substitute ...
- Use without dowel
- Can be used for heavily worn drills
- Interlocking functional tip
- Drive: T30- Head ø: 17.0 mm- Thread ø: 7.5 mm- Drill dia.: 6.0 mm- Length: 40 mm- Flat round head: Suitable for thin fittings with through hole, lies flat on the material- Fully threaded: Screw connection possible without dowels, absorbs high tensile forces, high contact pressure- Galvanised: Bl ...
- Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
- Fully threaded (variable VG): Absorption of high tensile forces, high contact pressure, contraction function as with partial thread
- Partial thread: Secure connection with reduced gap formation as the thread does not lock
- Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
- Fully threaded (variable VG): Absorption of high tensile forces, high contact pressure, contraction function as with partial thread
- Partial thread: Secure connection with reduced gap formation as the thread does not lock
- Galvanised steel
- Screw is inserted into the bore hole directly without a dowel
- Approved for brick, solid sand-lime brick, perforated sand-lime brick and lightweight concrete, except for thread ø 16.0 and 20.0 mm
- Phosphated functional tip
- Screw is inserted into the bore hole directly without a dowel
- Material: Stainless steel A4 1.4401
- Thread ø: 7.5 mm
- Drill-ø: 6 mm
- SW 10
- - Short Screws: low pitch prevents over-tightening
- Long Screws: high thread pitch, quick screwing into the wood
- Medium-length Screws: thread optimised in terms of screw-in time and thread portion in the wood - TOPIX® tip - reduces the risk of splitting the wood and enables closer edge and centre distances
- Suitable for one-handed work
- Galvanised steel
- Screw is inserted into the bore hole directly without a dowel
- Approved for brick, solid sand-lime brick, perforated sand-lime brick and lightweight concrete
- Suitable for: facades, rafter fixing, fittings
- Thread ø: 4.5 mm
- Head ø: 8.9 mm
- Suitable for: facades, rafter fixing, fittings
- Thread ø: 5.0 mm
- Head ø: 9.6 mm
- - Short Screws: low pitch prevents over-tightening
- Long Screws: high thread pitch, quick screwing into the wood
- Medium-length Screws: thread optimised in terms of screw-in time and thread portion in the wood - TOPIX® tip - reduces the risk of splitting the wood and enables closer edge and centre distances
- Suitable for one-handed work
- Galvanised steel
- Screw is inserted into the bore hole directly without a dowel
- Approved for brick, solid sand-lime brick, perforated sand-lime brick and lightweight concrete, except for thread ø 16.0 and 20.0 mm
- Without contents
- Made of shock-proof and impact-resistant ABS plastic
- Withstands even extreme loads
- Thread ø d1: 12.0 mm
- Blade size: T 50
- Head ø: 17.5 mm
- With GripFit - strong Bit holder for one-handed work
- MagicClose - patented full thread pulls wooden components together without gaps and without pretensioning
- Applicable for facades, rafter fastenings, fittings
- Material: Stainless steel A2 1.4567
- Head ø: 18 mm
- Thread: 8.0 mm
- Phosphated functional tip
- Screw is inserted into the bore hole directly without a dowel
- Material: Stainless steel A4 1.4401
- Thread ø: 12.0 mm
- Drill-ø 10.0 mm
- SW 15
- Phosphated functional tip
- Screw is inserted into the bore hole directly without a dowel
- Material: Stainless steel A4 1.4571
- Increased load capacity
- Material: Galvanised steel
Suitable for: - Above-rafter insulation with soft insulation materials
- High-Protect Coating (HP) with high corrosion protection
- Screw is inserted into the bore hole directly without a dowel
- Approved for masonry bricks, solid sand-lime bricks, perforated sand-lime bricks and lightweight concrete, except thread ø 16.0 and 20.0 mm
- Thread ø: 8.0 mm
- Head ø: 14.8 mm
- Drive: HD40
- Pan countersunk head: Countersunk head for inconspicuous appearance and secure, flush countersinking of the head
- Full thread: (Variable full thread) Withstands high tensile forces, high contact pressure, pull-together function as with partial threads
- Stainless steel A2: For outdoor use exposed to direct weathering and for use in damp rooms (e.g. kitchen and bathroom)