Helios
- Area of application
- For bathroom, toilet, storeroom, cellar, etc.
- Ventilation of internal rooms
- Area of application:
- Bathroom, lavatory, domestic kitchens, stockrooms and storage rooms in private and public residential units, hotels or other buildings according to DIN 18017-3
- Installation position: ceiling / wall
- For one and two-room ventilation
- Connection: 80 mm
- Suitable for blower unit ELS + ELS-EC
- EC technology, particularly economical in consumption
- Facade with filter inserts
- Voltage: 230V, 50 Hz
- Design: Radial
- Extracted volume: 175-1260 m³/h
- Acoustic pressure: 36 dB (A)
- For covering and insertion into round ventilation openings
- Made of break-resistant plastic
- With insertion connector, automatic
- For secure connection of hoses
- Metal band with turnbuckle
- Nominal ø: 100 mm
- For flush-mounting of M1 models
- Adjustable from 260 to 500 mm
- External closure via automatic damper or fixed baffle
- Suitable for ELS fan inserts
- Easy to clean in the dishwasher
- PU = 2 units
- Design: semi-axial
- Extracted volume: 190-910 m³/h
- Acoustic pressure: 34/38 dB (A)
- Aluminium
- For covering ventilation openings
- With insect screen and screw fastening
- Length 10 m (compressed to 600 mm)
- Fully flexible ventilation tube with two-ply polyester film, aluminium-coated
- Embedded spring spiral for stiffening
- Universal use, for installation in pipe systems
- Design: axial
- Flow rate: 105 m³/h
- Compatible with all ELS/ELS-EC Series Fan units
- DN 80 exhaust vent
- Exhaust vent can be rotated sideways, upwards, left or right
- Extracted volume: 14/24/32/37/45 m³/h
- Voltage: 12 V DC
- Protection type: IP 20
- Made of impact-resistant plastic
- Quantity setting with rotating valve plate
- For use in areas with no specific fire protection requirements
- Made of metal
- With clamping spring bracket for direct insertion in pipes or walls from 20 mm thickness
- Installation in sheet metal duct walls and thin panels using installation ring EBR (accessories)
- Extracted volume up to 110 m³/h
- Radial fan with forward curved wheels
- Installation height only 98 mm, ideal for tight spaces
- Housing made of galvanised sheet steel
- Connections on both sides with rubber lip seal for standard pipes
- Air hear with aluminium disks, pressed on copper pipes
- For covering and insertion into round ventilation openings
- With spring retainer
- With fire protection shut-off element K90
- Rear metal exhaust vent DN 80
- Housing made of impact-resistant plastic
- DN 125
- Length 2000 mm
- With 1 sleeve for connection to moulded parts
- Rear exhaust vent DN 80
- Housing made of impact-resistant plastic
- Colour: Alpine white
- For a wide range of applications in residential and commercial areas
- Nominal diameter ø: 100 mm