Indexa®
- Distribution over two stub cables for one indoor station each
- Dimensions (W x H x D): 47 x 47 x 17 mm
- Suitable for VT200 video door intercom system
- Enables image storage, connection of compatible network cameras and call forwarding with image display on app via SIP server (prerequisite: LAN connection to a router, common for all parties, FRITZ!Box recommended)
- When using a microSD card, videos with a length of 10 seconds can be recorded
- Suitable for ACL10 app monitoring camera (order no. 62 058 05)
- Suitable for receiver WR100M7
- Charging via power supply unit of receiver
- Can be used for up to 3 hours with one charge (2 pieces are required)
- Suitable for VT38 video door intercom system
- 1 x call button
- Colour camera (captures 118° horizontally, 97° vertically)
- Caution warning sticker - alarmed
- Stickered on the front
- Triangular shape
- Full HD wireless monitoring camera with WLAN video recorder
- A connection can be established between the camera and recorder via WLAN or LAN
- Automatic recording and notification via app/email when there is motion
- Door intercom in robust ZAMAK alloy
- RFID reader unit for controlling the door opener
- Super wide-angle colour camera (170° horizontal detection) with zoom function
- Teaching and clearing chips using the admin chips supplied with the door intercom
- Colour: blue
- Suitable for VT200 video door intercom system
- Voltage, primary: 230 V, 50 Hz
- Voltage, secondary: 28 V/DC
- Compact and weatherproof housing with red Panel
- Xenon flash tube with frequency of approx. 90/min (1.5 Hz)
- Connection via wires, length 500 mm
- Video surveillance warning sticker
- Self-adhesive PE film
- Colour: blue
- Suitable for VT200 and VT35 video door intercom system
- Operating voltage: 12 V/DC
- Current consumption: 240 mA
- Full HD wireless monitoring camera with WLAN video recorder
- A connection can be established between the camera and recorder via WLAN or LAN
- Automatic recording and notification via app/email when there is motion
- Door intercom in robust ZAMAK alloy
- RFID reader unit for controlling the door opener
- Super wide-angle colour camera (170° horizontal detection) with zoom function
- Up to 12 detectors for smoke, heat and water can be networked together
- Alarm sounds at all connected detectors
- App connection for alarm notifications, faster localisation of the detectors, for test alarms and for viewing the battery statuses via smart siren (order no.: 62 058 19)
- Door intercom in robust ZAMAK alloy
- RFID reader unit for controlling the door opener
- Super wide-angle colour camera (170° horizontal detection) with zoom function
- Full HD wireless surveillance camera with multifunction monitor
- Tap-proof and interference-free thanks to digital transmission
- Intercom is possible thanks to the microphone integrated in the camera and monitor
- Enables the routing of 12 V/DC via CAT5/6/7 cable
- Suitable for WR100B and WR100D camera
- Power transmission up to max. 20 m
- For indoor use
- Housing made of ABS plastic
- Ball design, adjustable for optimal alignment
- For SGK5010 cooker guard (order no.: 62 085 22)
- Wall mounting 80 cm above the hob with fixed Angle
- Scope of delivery:
- Screws
- Adhesive pad
- Suitable for camera order no. 62 107 20
- M22 holes to the side, bottom and rear
- Dimensions (L x W x H): 95 x 115 x 45 mm
- Protection class: IP65
- Radio frequency: 2.4 GHz
- Wireless range: max. 150-200 m with unobstructed view
- Connection via 4-wire technology
- Electrical door opener (12 V/DC, max. 1A) can be connected to the indoor station with 2 wires as an option
- Suitable for door intercom system order no. 62 107 08