INTEWA
- Electronic pressure switch and flow detection sensor, switches the pump on automatically to remove water then switches it off again
- Powerful pumps for water butts, wells and cisterns
- Dry-running protection with automatic reset
- Fully automatic speed-controlled Rainwater utilisation systems with automatic changeover switch to drinking water mode
- Speed-controlled pump with permanent magnet motor, therefore particularly durable, quiet and economical in power consumption
- DVGW-certified complete station
- Advantages:
- Savings on drinking water and wastewater charges
- Ideal for supplying toilets, washing machines and watering the garden
- Flat plastic cistern, ideal for retrofitting on existing properties
- A telescopic segment and plastic cover are required for the shaft structure
- The cisterns are equipped with four DN 100 for inlet, overflow, supply and emergency overflow incl. lip seal
- Specially developed for rainwater utilisation, fully automatic operation and monitoring station with ultra-low power consumption
- Optimised for use in single-family homes
- Compact construction with volume flow-optimised membrane pump, pump control and automatic, DVGW-tested drinking water supply pursuant to DIN 1989
- Fully automatic rainwater utilisation and drinking water make-up feed
- Speed-controlled pump, making it particularly durable, quiet and economical in terms of power consumption
- DVGW-tested complete station
- Speed-controlled domestic waterworks, making them particularly durable, quiet and economical in terms of power consumption
- Adjustable constant pressure
- NUVOS pump technology with highly efficient permanent magnet motor
- Robust plastic cisterns with moulded dome shaft
- A telescopic segment with a plastic cover is available for the shaft
- 3300, 5000 or 7000 litres; can be expanded simply by coupling additional cisterns
- Suitable for ETF-3000/5000/7100 and shafts with DN 600
- Double-walled, manufactured in accordance with DIN 1989
- Loadable up to 150 kg
- Robust plastic cisterns with moulded dome shaft
- A telescopic segment with a plastic cover is available for the shaft
- 3300, 5000 or 7000 litres; can be expanded simply by coupling additional cisterns
- Temperature range: -25 to +70°C
- Material: EPDM
- Pressure range: 0.85 to 1.5 bar
- Robust plastic cisterns with moulded dome shaft
- A telescopic segment with a plastic cover is available for the shaft
- 3300, 5000 or 7000 litres; can be expanded simply by coupling additional cisterns
- Temperature range: -40°C to +93°C
- Material: EPDM
- Reinforcement: synthetic cord
- Temperature range: -25 to +70°C
- Material: EPDM
- Reinforcement: synthesised cordierite
- Self-cleaning rainwater filter for cistern installation
- For single-family homes
- With stainless steel slotted sieve 0.8 mm
- For installation in the cistern or in a pre-filter shaft
- Collecting filter basket with large collection volume and Fine filtration with a large filter surface area
- The filter basket is suspended below the inlet to the rainwater cistern. The filtered water is sufficient for simple garden irrigation. As dirt is collected in this filter, regular maintenance of the filter must be ensured.
- Assumes the task of the level-dependent drinking water make-up feed
and enables automatic operation of the rainwater system - Adjustable make-up feed switch point
- Integrated, calibratable level display
- The intermediate ring can be used for greater installation depths
- Can be shortened
- Incl. sealing ring
- For INTEWA STANDARD systems we offer DIN 1989-1 compliant
drinking water make-up feed in the cistern via a free outlet
with slow-closing solenoid valves in ready-to-use feeding units
in the size DN 15 (1/2“) - Feeding unit with 24 V DC valve and RMD-24 fill level display
- Safety backfeed cutoff after 2 hours
- Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation and household supply
Advantages: - No noise in the house
- Level gauge included
- Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation
Delivery contents:
(1) Plurafit filter with filter basket, tank installation DN 100
(2) Fully automated underwater pump with integrated control
(3) 5 m Horizon pressure hose DN 25 (1”)
(4) Plurafit water connection and hose storage box
(5) Plurafit cap
Pump data: - Voltage: 230 V / 50 Hz
- Nominal power: 900 W
- Delivery contents:
- Cable 15 m
- Counter weight
- Separate level indicator specially for installation in RAINMASTER ECO
- Includes the display module, sensors and control line to the cistern
- The display module is simply mounted instead of the placeholder on the RM ECO.