Kemper
93 246 86
Frost-proof external wall valves Kemper Frosti-Plus,gunmetal, DN15 (1/2"),wall thickness 150-415mm
Immediately available
- Torque limiter in the Handles prevents the valve seal from being overtightened
- Setting depth (wall thickness): from 150 mm to 415 mm
- Max. operating pressure: 16 bar
Multiple variants
Circulation regulating valve Multitherm, 50°C to 65°C
Immediately available
- For hydraulic balancing in drinking water installations with multiple circulation lines
- Thermal self-regulation
- With automatic control range changeover for thermal disinfection
Technical data:
Multiple variants
Sampling valve in gunmetal, KEMPER
Immediately available
- For taking samples of drinking water, determination of microbiological parameters according to TrinkwV
- Can be retrofitted in standard shut-off valves with draining valve connection
- Valve body can be rotated 360°
93 176 14
System separator outlet valve FK 4 DN15 (1/2"), type BA, gunmetal
Immediately available
- Connection size:
- Inlet: DN 15 (1/2")
- Outlet: DN 20 (3/4") - Made of gunmetal
- Operating pressure: max. 10 bar
93 187 22
System separators KEMPER BA chrome-plated, DN10, R1/2
Immediately available
- Connection size:
Input: DN 15 (1/2”)
Output: DN 20 (3/4”) - Made of brass, chrome-plated
- Max. operating pressure: 10 bar
93 246 88
Extension for FROSTI DN15 (1/2") - DN20 (3/4"), 30 - 250 mm
Immediately available
- For frost-proof external fitting figure 574 / 578
- Ref. no.: 5780000200
Multiple variants
Spare parts Kemper Frosti 2024
Immediately available
- Spare parts Frosti® frost-proof outdoor fitting
- Figure 578 00/03/05 (from 2024)
93 159 36
Extension for Frost Plus
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 187 34
KEMPER drain valve, RG ET, DN 8 (1/4”)
Immediately available
- Hose connection DN 20 (3/4”), rotating
- Nominal width DN8 (1/4”) ET
- Max. operating temperature: 110°C
Multiple variants
Free-flow valves, Weser, gunmetal, with external thread
Immediately available
- With rising spindle
- With drain plug DN 8 (1/4")
- Option to accommodate temperature sensor Pt1000 or thermometer
Multiple variants
Circulation regulator valve Therm, 30°C to 50°C
Immediately available
- For hydraulic balancing in drinking water installations with multiple circulation lines
- Thermal self-regulation
- With automatic control range changeover for thermal disinfection
Technical data:
93 176 19
FROSTI-PLUS fixing set for FROSTI-PLUS DN15/20
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 176 20
Ersatzkegel m.RV o.Spindel für FROSTI nach Figur 574/577 DN15
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 159 34
Inner upper part pos. 4
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 159 35
Cone with RV and spindle Pos. 16.1
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
Multiple variants
Free-flow valves, Weser, gunmetal, with internal thread
Immediately available
- With rising spindle
- With drain plug DN 8 (1/4")
- Option to accommodate temperature sensor Pt1000 or thermometer
Multiple variants
Insulation shell for circulation regulator valve Multitherm and Therm
Immediately available
- Closed-cell foamed polyethylene
- Sound and heat insulated
- Operating temperature range: -40°C to +90°C
Multiple variants
Flow separator group KHS-Venturi, IT, flush-mounted
Immediately available
- Prevents stagnation in ring pipe installations by means of forced flow with downstream tapping points, usable for cold and hot drinking water
- Flow divider using the Venturi principle, including dynamic cartridge
- With wet cell infeed and return pipes
93 187 24
Water meter mounting block KEMPER, gunmetal for 2" coaxial meter
Immediately available
- COAX connection capsule: DN 50 (2”)
- Material: gunmetal
- Connection: DN 20 (3/4”)
Multiple variants
Insulation shell univ., KEMPER angle seat incl. locking clips
Immediately available
- Closed-cell foamed polyethylene, sound-insulating
- Operating temperature: -40 to +90 °C
Standards and approvals: - For compliance with the requirements of EnEV 2014
93 237 41
Extension set 90 mm, can be shortened to any length
Immediately available
- Consisting of screw-fitted plastic shaft and extension spindle
- 90 mm, can be shortened to any length
93 159 33
Operating handle complete pos. 1-3
Replacement item available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 176 17
FROSTI socket spanner top for frost-proof outdoor taps from 2007 onwards
Immediately available
- Replacement parts Kemper Frosti® frost-proof external fitting Figur 574 00/03/05 (07/2006 and later)
93 176 15
System separator replacement cartridge for 360/367 DN15-25, for 366 DN15-20
Immediately available
- Suitable for DN 15 (1/2”) to DN 50 (2”)
- For figure 360 0G production 2010 to 2014 and for figure 367 01/02 - Ref. no.: 3600000100
