Klingspor

24 / 103 Klingspor
Hauptbild
Multiple variants
Diamond cutting discs DT 612 UT Supra, for concrete, old reinforced concrete, lime sandstone
Immediately available
  • Material to be cut: concrete, reinforced old concrete, sand-lime brick
  • Suitable for dry cutting
  • Inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Cutting discs A 60 TZ SPECIAL, straight
Immediately available
  • Material to be cut: stainless steel, steel, non-ferrous metal
  • Inner hole ø: 22.23 mm
  • Low burr formation
Hauptbild
Multiple variants
Cutting discs A 60 EXTRA, straight
Immediately available
  • Material to be cut: Stainless steel, universal metal
  • Inner hole ø: 22.23 mm
  • Low burr formation
Hauptbild
Multiple variants
Sanding block
Immediately available

- Flexible foam core, sprinkled on 4 sides- Width x length x height: 70 x 100 x 25 mmApplication:- Paint, varnish, putty, wood- Can be used flat and upright- Washable and reusable- Grit type: aluminium oxide- Grit type: dense ...

Hauptbild
Multiple variants
Kronenflex® Trennscheibe INOX A 46 TZ SPECIAL, gerade
Immediately available
  • Material to be cut: for stainless steel, steel
  • Inner hole ø: 22.23 mm
  • Self-sharpening
Hauptbild
Multiple variants
Diamond cutting disc DT 350 U EXTRA
Immediately available
  • Material to be cut: concrete, masonry, roof tiles, sand-lime brick, natural stone, clinker brick, screed
  • Suitable for dry cutting
  • Inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Grinding block HBD
Currently not in stock
  • For surface and edge sanding
Hauptbild
Multiple variants
Diamanttrennscheibe DT 900 U SPECIAL
Immediately available
  • Material to be cut: concrete, roof tiles
  • Suitable for dry cutting
  • Inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Non-woven abrasive material NRO400
Immediately available
  • Universal application for manual use and handheld sanders
  • Width: 115 mm
  • Length: 10 m
    Application:
Hauptbild
Multiple variants
Sandpaper PS22
Currently not in stock
  • Universal application for manual operation and many machine models
  • Width: 115 mm
  • Length: 50 m
    Application:
Hauptbild
Multiple variants
Diamanttrennscheibe DT 900 U SPECIAL
Immediately available
  • Material to be cut: concrete, reinforced old concrete, sand-lime brick, hard stone
  • Suitable for dry cutting
  • Inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Lamellenschleifteller SMT 325 X-LOCK, gerade
Immediately available
  • Material to be ground: stainless steel, steel
  • Mounting: X-LOCK and inner hole ø: 22.23 mm
  • Backwards compatible with standard angle grinders
Hauptbild
Multiple variants
Diamond cutting disc DT 310 UT EXTRA
Immediately available
  • Material to be cut: concrete, roof tiles
  • Suitable for dry cutting
  • Inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Kronenflex® Trennscheibe X-LOCK A 60 TZ Spezial, gerade
Immediately available
  • Material to be cut: stainless steel, steel, non-ferrous metal
  • Mounting: X-LOCK and inner hole ø: 22.23 mm
  • Backwards compatible with standard angle grinders
Hauptbild
Multiple variants
Hartmetallfräser HF 100 F, rundbogenförmig
Immediately available
  • Area of application: carbon steel, tool steel, unalloyed and alloyed and hardened steel, case-hardened steel, cast steel
    6 teeth also suitable for nickel-base alloys, cobalt-base alloys, grey cast iron, white cast iron
    10 teeth also suitable for grey cast iron, white cast iron
  • Also suitable for machining form parts
  • With cross serration
Hauptbild
Multiple variants
Hartmetallfräser HF 100 D, kugelförmig
Immediately available
  • Area of application: carbon steel, tool steel, unalloyed and alloyed and hardened steel, case-hardened steel, cast steel
    6 teeth also suitable for nickel-base alloys, cobalt-base alloys, grey cast iron, white cast iron
    10 teeth also suitable for grey cast iron, white cast iron
    11 teeth also suitable for nickel-base alloys, cobalt-base alloys
  • For machining contours, deburring bores
  • With cross serration
Hauptbild
Multiple variants
Diamanttrennscheibe X-LOCK DT 350 U Extra
Immediately available
  • Material to be cut: concrete, masonry, roof tiles, sand-lime brick, natural stone, clinker brick, screed
  • Suitable for dry cutting
  • Holder: X-LOCK and inner hole ø: 22.23 mm
Hauptbild
Multiple variants
Cutting disc A 346 EXTRA, straight
Immediately available
  • Material to be cut: stainless steel, steel, aluminium
  • Inner hole ø: 22.23 mm
  • Self-sharpening, low burr formation
Hauptbild
Multiple variants
Cutting disc C 24 EXTRA, straight
Immediately available
  • Material to be cut: stone, concrete
  • Inner hole ø: 22.23 mm
  • Universal cutting disc for mineral materials
Hauptbild
Multiple variants
Hartmetallfräser HF 100 B mit Stirnverzahnung
Immediately available
  • Area of application: carbon steel, tool steel, unalloyed and alloyed and hardened steel, cast steel, grey cast iron, white cast iron
  • Suitable for machining blind holes and end faces on internal contours
  • With face splines
Hauptbild
Multiple variants
Hartmetallfräser HF 100 L, rundkegelförmig
Immediately available
  • Area of application: 10 teeth suitable for carbon steel, tool steel, unalloyed and alloyed and hardened steel, cast steel, grey cast iron, white cast iron
    11 teeth suitable for nickel-base alloys, cobalt-base alloys
  • Suitable for machining hard-to-reach areas
  • With special toothing
Hauptbild
Multiple variants
Sanding discs PS 77
Immediately available
  • Hole form GLS 24
  • Universal application for many machine models
  • Width x length: 98 x 148 mm
    Application:
Hauptbild
Multiple variants
Cutting discs A 60 TZ SPECIAL, cranked
Immediately available
  • Material to be cut: stainless steel, steel, non-ferrous metal
  • Inner hole ø: 22.23 mm
  • Low burr formation
Hauptbild
Multiple variants
Hartmetallfräser HF 100 A ohne Stirnverzahnung
Immediately available
  • Area of application: 10 teeth suitable for carbon steel, tool steel, unalloyed and alloyed and hardened steel, cast steel, grey cast iron, white cast iron
    11 teeth suitable for nickel-base alloys, cobalt-base alloys
  • Suitable for surface machining
  • Without face splines