MAGRA

• For underfloor heating
  
• With mounted Magra valves
  
• Pre-flow can be retrofitted with M30 x 1,5, electric actuator Heimeier compatible
  

• For underfloor heating
  
• With mounted Magra valves
  
• Pre-flow can be retrofitted with M30 x 1,5, electric actuator (Heimeier compatible)
  

• Group outlets: Fitting DN25 (1”) external thread
  
• Fitting and bushing spacings: 125 mm
  
• Group outlets at the top; inflow and return adjacent to one another
  

• Hot water flow rate: up to 3 m³/h
  
• Power at ∆T=20°C: up to 70 kW
  
• Type: TÜV-tested
  

self sealing, plug vent valve and drain valvePlease order as well ! ...

• For insulated hydraulic Deflector model WST
  
• Electrogalvanised
  
• Including fastening materials
  

• Pre-stained and passivated
  
• For underfloor heating
  
• With mounted Magra valves
  

• Magra - AV Setter Rondo DN 15 (1/2")
  
• With default 0.6 - 8.0 l/min

WST hydraulic junction consisting of: Steel exchange chamber with welded end plates.2 1 1/4" muffs for heat producers, 2 x 1 1/4" threaded spigots with 2 x 1 1/4" f/f couplings to connect to boiler manifold type 60-12.5 or 2 couplings 1 1/4" x 1" f/f for Dispo boiler manifold type 60-12.5 and boiler ...

• Socket spacing: 200 mm
  
• Draining fitting DN 15 (1/2”) for flow chamber
  
• Double chamber 85x85 mm
  

• Sound-proofed
  
• For fastening the heating manifold onto the wall (60/60, no insulation)
  
• Retaining bracket
  

• For radiators
  
• Without valves
  
• Exterior plastic-coated
  

• The heat generator circuit and the downstream heating circuits are hydraulically decoupled. As a result, a hydraulic diverter allows different volume flows on the heat generator side and the consumer side. This ensures optimum interaction between control technology and hydraulics.
  
• Operating pressure: max 6 bar
  
• Operating temperature: up to 110 °C
  

• Complies with EnEV
  
• Wall thickness: 25 mm
  
• Black PU rigid foam half shells
  

• Thermally separated flow and return tank, suitable for condensing technology
  
• Socket spacing: 160 mm
  
• Draining socket DN 15 (1/2") for flow and return chamber
  

• For insulated HWplus boiler manifolds
  
• Projection to manifold centre

• Combined flow and return manifold with integrated hydraulic switch
  
• Manifold chamber for flow and return, positioned one above the other
  
• Exchange chamber for hydraulic switch made of welded sheet steel
  

• With shut-off and controllable screw connections DN 25 (1“)
  
• 1 MAGRA connecting piece with screw connection DN 25 (1“)
  
• 1 Flow screw connection DN 25 (1“) with 1 control valve DN 25 (1“)
  

• Group outlets: oval flange fittings DN25 (1”)
  
• Fitting and bushing spacings: 125 mm
  
• Group outlets at the top; inflow and return adjacent to one another
  

• Accessories for Magra heating manifold Tubo (60/60)
  
• Complies with Energy Saving Ordinance (EnEV)
  
• PU rigid foam half shells
  

• to designate the heating groups
  
• Can be plugged in between the DN 15 (1/2“) outflow support
  
• Self-inscription or insert embossing tape (9 mm)
  

• 1 MAGRA connecting piece with screw connection DN 25 (1“)
  
• 1 flow screw connection DN 25 (1“)
  
• 2 reduction plugs DN 25 (1“) x DN 10 (3/8“)
  

• Self-sealing
  
• Pressure level: PN 6
  
• Screw-in thread support DN 40 (1 1/2“) ET according to ISO 228/1 with O-ring
  

• Include 2 heating groups
  
• Complies with EnEV
  
• Wall strength: 35 mm