Maico
- Fan insert with EC motor
- Can be combined with various covers with integrated control panel for setting extracted volume and control times
- Optional base load/full load operation or pure full load operation
- For regular ventilation of seldom used rooms
- The fan can be switched on via interval switch and via manual actuation
- Can be actuated via standard switch
- Thermostat for controlling fans depending on the air temperature
- A universal protector is required for switching three-phase fans
- VDE, SEV, Semko and Nemko-tested
- Compatible with ER-EC blower unit
- Outlet DN75/80 sideways or to the rear
- Integrated check valve
- Connection set with mounting supports, inner grille and filter
- Plastic white
- For use in fan units ER 100 required air distribution: main room 60 m³/h second room 40 m³/h
- For fan inserts ER.., extract air elements Centro.. and surface-mounted fans ER-AP../ER-APB..
- With timestrips for switch reminder
- Filter class G2
- Mounting bracket for installing flush-mounted housings on walls, ceilings or shafts
- With slotted holes for precise adjustment
- Scope of delivery:
- 2 L-shaped angle brackets
- 4 mounting screws
- Installation length: 260–500 mm
- For wall and ceiling installation
- Length variable
- For aeration and ventilation
- External dimensions: 200 x 200 mm
- Nominal width: 150 mm
- By comparing absolute humidity indoors and outdoors with climate sensors, controlled de-humidifying is guaranteed and moisture discharge due to incorrect ventilation is also prevented at the same time. This is used to preserve the structure. The built-in frost protection function turns off the fan at less or equal than 3°C external temperature. One-time manual operation for 20 min. can be carried out with the button on-site, or on the device itself.
The built-in output relay allows the system to be expanded with additional supply air (ECA 11E) and exhaust air fans (ECA 100 ipro K). Ventilation can also be carried out via a pipe guide to approx. 5.5 m with the long sensor cable (accessories).
Technical data - Design: Axial
- Protection type: IPX4
- Hygrostat for controlling fans depending on the relative humidity
Technical data: - Voltage type: Alternating current
- Voltage: 230 V
- For housing inserted too deeply in shafts, prevents air from being extracted from the shaft
- Depth: adjustable from 50 to 100 mm
- Galvanised sheet steel
- Continuous air flow control via rotatable valve plate
- Colour: pure white (similar to RAL 9010)
- Material: Sheet steel, powder-coated
- Fully automatic cellar/garage dehumidification for permanent equalisation of the absolute humidity indoors and outdoors
- Switches on the fan if the absolute Humidity in the room is higher than outside
- Interrupts the ventilation in humid weather conditions and thus prevents the unwanted increase in humidity in the Trowels due to air ingress
- Fully automatic cellar/garage dehumidification with intelligent control for permanent equalisation of the absolute humidity indoors and outdoors
- Fans ventilate independently if the absolute Humidity in the room is greater than outside
- Interrupts ventilation in humid weather conditions and thus prevents an unwanted increase in humidity in the Trowels due to air ingress