Milwaukee
- Suitable for: carbon steel/stainless steel/copper
- Pipe ø (mm): 12/15/18/22/28
- Max. pipe wall thickness (mm): 1.5
- Suitable for: carbon steel/stainless steel/copper
- Pipe ø (mm): 35/42/54
- Max. pipe wall thickness (mm): 1.5
- Material to be cut:
- Metal/NE metals (3-10 mm)
- Sandwich material (5-100 mm)
- Wood with nails (5-100 mm)
- Plastic pipe (3-100 mm)
- PVC (10-50 mm) - Application: for fast cuts
- Tooth pitch: 10/14 teeth per inch
- Consisting of:
- Phillips: PH1/2x PH2/PH3, 25 mm
- Pozidriv: PZ1/2x PZ2/PZ3, 25 mm
- Set consisting of:
Cordless impact screwdriver, 18 V - Battery capacity (Ah): 2.0-12.0
- Torque (Nm) max.: 158
- HB HIGH OUTPUT
- Up to 50 % more power compared to model B
- Improved cooling technology for constant power output under load
- Metal drills set THUNDERWEB, 8-piece
- Area of application: For drilling alloyed and unalloyed steel up to 900 N/mm²
- Consisting of:
- ø 2.0/3.0/4.0/5.0/6.0 mm
Step drill set, 2-piece
- Suitable for: Stainless steel
- Battery capacity (Ah): 2.0-12.0
- Air volume (l/min.): 1300
- Vacuum (mbar/kPa): 80/8
- PACKOUT compatible
- Impact wrench resistant
- Consisting of:
- Phillips: PH1/3x PH2/ PH3, 25 mm
- Pozidriv: 2xPZ1/3xPZ2/PZ3, 25 mm
- Torx®: 2xTX10/2xT15/3xT20/3xT25/2xT30/T40, 25 mm
- Phillips: PH2, 50 mm
- Pozidriv: PZ2, 50 mm
- Torx®:T15/T20/T25/T30/T40, 50 mm
- Socket wrench hexagonal: 7/8/10, 48 mm
- Magnetic bit holder: 60 mm
- Battery capacity (Ah): 2.0-12.0
Rechargeable battery life: 908 l with 5.0 Ah rechargeable batteries - Flow rate (l/h): 1817
- Thread size: 3/4” (19 mm) external thread
- Suitable for: Carbon steel/stainless steel/copper
- 2 x wood with Nails AX, 230 mm
- 2 x metal TORCH, 230 mm
- 1 x metal TORCH, 150 mm
- PACKOUT compatible
- Impact wrench resistant
- Consisting of:
- Phillips: PH1/3x PH2/PH3, 25 mm
- Pozidriv: PZ1/3x PZ2/PZ3, 25 mm
- Torx®: 2xT10/T15/2xT20/2xT25/2xT30/2xT40, 25 mm
- Hexagon socket: 4/5, 25 mm
- Phillips: 2xPH2/PH3, 50 mm
- Pozidriv: 2xPZ2/PZ3, 50 mm
- Torx®:T10/T15/2x T20/2x T25/2x T30/2x T40, 50 mm
- Phillips: PH2, 90 mm
- Pozidriv: PZ2, 90 mm
- Torx®: T20/T25, 90 mm
- Magnetic bit holder: 60 mm
- Drills dia. (mm): 5/6/8
- Idle speed (min-1): 0-600
- Pipe diameter (mm): 32-110
- Spiral: 10 mm x 10.6 m
- Material to be cut:
- Metal/NE metals (1.5-8 mm)
- Metal pipe (10-175 mm)
- Stainless steel (1.5-4 mm) - Application: 0.90 mm thin blade ideal for fast and flexible cuts
- Tooth pitch: 18 teeth per inch
- Area of application: For Drills in reinforced concrete
- Shank: SDS-Max
- Design: 4-cutter
- Battery capacity (Ah): 2.0-12.0
- Pressure (bar): 10.3
- Delivery volume (l/min.): 40
- Area of application: for soft wood
- Battery capacity (Ah): 2.0-12.0
- Torque (Nm) max.: 158
- Torque pre-selection: yes
- For sawing steel pipes, wood with nails, plastic and stainless steel
- Cutting length (mm): 150/230
- Consisting of:
- 2 x AX™ for wood with nails: Wood, wood with nails, Plastic pipes (10-100 mm)
- 2 x AX™ for wood with nails: Wood, wood with nails, Plastic pipes (10-175 mm)
- 4 x TORCH™ for metal: steel, non-ferrous metals (1.5-8 mm), stainless steel (1.5-4 mm), metal pipe (ø 10-100 mm)
- 2 x TORCH™ for metal: steel, non-ferrous metals (3-11 mm), stainless steel (3-7 mm), metal pipe (ø 10-175 mm)
- 2 x WRECKER™ for multi-material: wood with metal (10-100 mm), non-ferrous metals (4-10 mm), steel (4-10 mm), metal pipe (ø 10-100 mm), cast iron (ø 10-100 mm)
- 1 x TORCH™ carbide-tipped: wood with metal (10-100 mm), non-ferrous metals (5-14 mm), steel (5-14 mm), metal pipe (ø 10-100 mm), cast iron (ø 10-100 mm)
- Material to be cut:
- Metal/NE metals (5-13 mm)
- Metal pipe (10-175 mm)
- Cast iron (10-175 mm)
- Wood with nails - Application: Demolition work of multi-material, wood with nails or bolts and thick metal
- Tooth pitch: 6 teeth per inch
- Internal hole ø (mm): 10
- Area of application: Soft and hard wood as well as OSB, MDF and blockboard
- Shank: Hexagon 7/16" Hex
- Consisting of:
- ø (mm): 35/38/54/65