OBO

• Length: 2000 mm
  
• Upper and lower part with base perforation
  
• 4 upper part clamps
  

• Ducts with cover and base perforation
  
• Incl. 4 top clamps
  
• Material: polyvinyl chloride
  

• >
• Protection type: IP44
  
  
• For clean and safe surface installation of a wide range of cables on the wall and ceiling, including in a pipe
  

• Suitable for steel and insulation pipes
  
• Can be connected in series with Multi-Quick and Star-Quick clamp
  
• Slot for alignment when fitting
  

• UV-resistant
  
• Material: thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate EVA
  
• Lid with label
  

• For changing direction of the WDK channels 30030

• Length: 2000 mm
  
• Colour: stone grey

• For changing direction of the WDK channels 40060

- For cable and combination penetration seals- Can only be used with cartridge guns FBS-PH or FBS-PA- Incl. 2 mixing tubes- Content: 380 mlAttention: The use of this article is only permitted with an approved training certificate! (see associated data sheet) ...

• Protection type: IP55
  
• Material: thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate EVA
  
• Standard design: flame-retardant, testing temperature 650°C
  

• According to DIN EN 60715 (previously DIN EN 50022)
  
• Length: 2000 mm
  
• Dimensions (W x H): 35 x 7.5 mm

• With visual defect display
  
• Maximum continuous voltage 280 V
  
• Consisting of upper and lower part, pre-assembled and ready-to-connect
  

• 7 x single or multi strand cables up to 25 mm² or fine stranded cables up to 16 mm²
  
• Can take 100 kA (10/350) lightning current
  
• For equipotential bonding according to DIN VDE 0100-410 / -540 as well as lightning current equipotential bonding according to DIN VDE 0185-305
  

• Heavy, for continuous attachment to IS 8 support
  
• Material: hot-dip galvanised steel

• Fire-retardant filler for indoor areas for filling joints and openings
  
• For core drilling holes for individual cable feed-throughs
  
• Construction material class DIN 4102 - B2 normally flammable
  

• Installation pipe, hot-dip galvanised
  
• Without thread ends for cables and lines
  
• Inner wall is burr-free
  

• For changing direction of the WDK channels 40060

• Use for electrical and plumbing pipes made of plastic, metal and Quick-Pipe system
  
• Universal fitting options
  
• Flexible clamping range
  

• Design with fibre insert (hemp core)
  
• Cable ø 2 - 6 mm: round strand cable 6 x 7 according to DIN 3055
  
• Cable ø 8 - 10 mm: round strand cable 6 x19 according to DIN 3060
  

• For closing device installation channels
  
• Dimensions (H x L): 2000 x 76.5 mm
  
• Colour: pure white

• Protection class: IP20
  
• Housing equipped and pre-wired with suspension eye, handle hooks and 4 cover plates
  
• For the version with compressed air connection, 1 m pipe and 2-way Manifold included
  

• Similar to DIN EN 60715 (previously DIN EN 50022), but with material thickness 1.5 mm
  
• Length: 2000 mm
  
• Dimensions (W x H): 35 x 15 mm

• Perforated
  
• Lightweight design
  
• Slot width 17 mm