Pentair Jung Pumpen
- For pumping rainwater, slightly polluted water and domestic waste water without faeces
- Engine jacket cooling
- Flat intake with removable sieve foot
- Flat suction up to a residual water level of 2 mm, for a wipe-dry surface
- Ideal for clear water from basements, pools or flat roofs
- Pump housing: aluminium
- Plancofix is a VDE-tested floor drainage pump that makes it possible to install ground-level/low showers in places where this was previously impossible because of a lack of downward incline
- Inlet from above as floor drainage or from side (e.g. with existing shower channel)
- Reversible cover in stainless steel or as tile
- IT / IT
- With integrate drainage screw
- For discharging condensation from gas oil condensing boilers (up to 100 kW) and air conditioning systems
- Ready to plug in
- Integrated backflow preventer
- Suitable for toilets, washbasins, showers, bidets
- Ready to plug in
- Pumping via vortex impeller
- For drainage of homes
- Compact individual system with mounted check valve
- Ready to plug in
- Suitable for water softeners and condensing boilers, showers, Bathtubs, Sinks and washing machines
- Ready to plug in
- For pumping slightly acidic condensate, abrasive or salty media (max. 15% salt content)
- Suitable for Compli 400 sewage lifting unit till 2009
- Ref. no.: JP47644
- For draining individual houses
- Single unit with integrated check valve
- Ready to plug in with control
- The Plancofix is a VDE-tested floor drain pump with shower channel that allows level/low showers to be installed even in places where it was previously not possible due to a lack of slope
- Complete set with pre-mounted sealing fleece
- The stainless steel channel can be shortened as required
- Suitable for Compli 400 control ADZ25
- Ref. no.: JP47729
- Suitable for Compli 300 sewage lifting unit
- Ref. no.: JP50331
- Suitable for Hebefix series
- Ref. no.: JP45098
- For conveying lightly acidic condensate, aggressive or saline media (max. 10% salt content)
- Engine jacket cooling
- Flat intake with removable sieve foot
- Sliding pipe for raising and lowering the Pumps, enables easy maintenance or replacement of the Pumps
- Compatible with waste water pumps U3 KS, U3 KS Special, U5 KS and U6 K ES
- Pressure connection: 38-42 mm via rubber sleeve
- Suitable for US series waste water pump, UB series construction pump, MultiCut pumps 08, 20
- Ref. no.: JP46043
- Flat suction up to a residual water level of 2 mm, for a wipe-dry surface
- Ideal for clear water from basements, pools or flat roofs
- Pump housing: aluminium
- Suitable for pumping dirty water and groundwater, in shafts with rainwater, drainage water and seepage water and also for liquid fertilisers without faeces as well as abrasive media
- Engine jacket cooling
- Flat intake with removable sieve foot
- Suitable for Compli 400 control ADZ00
- Ref. no.: JP47680
- Suitable for U3
- For pumping heavily contaminated water. Waste water containing fibres, like that which is produced in laundries or communal washing facilities. Domestic machines such as dishwashers and washing machines (cooking process) can be pumped with these pumps
- For commercial applications and hot water
- Pump housing: grey cast iron
- Suitable for various ex-protected control units
- Ref. no.: JP48148
- Suitable for pumping heavily contaminated water up to 90°C. Like that which is produced in laundries or communal washing facilities. As well as for commercial dishwashers and washing machines
- Pump housing: grey cast iron
- Motor housing: stainless steel