PFERD
84 030 74
Mini brush Pferd HBZ, brass wire Ø 0.15 mm, 3-row
Immediately available
- Bristle material: brass
- Bristles: 0.15 x 15
- Total length: 145
Multiple variants
Wire brush HBU, brass wire
Immediately available
- Bristle material: brass
- Bristles: 0.30 x 25 mm
- Total length: 290
84 030 32
Round brush, Ø 100 mm, shank-Ø 6 mm, plastic Ø 1.27, grit 80
Immediately available
- For steel, cast steel, stainless steel, aluminium, cast iron, bronze, wood, thermoplastic
- Suitable for roughening, deburring, cleaning
84 030 72
Wire brush Pferd HBG, brass wire Ø 0.30 mm, 1-row
Immediately available
- Bristle material: brass
- Bristles: 0.30 x 25
- Total length: 265
Multiple variants
Cutting disc PSF, straight
Immediately available
- Material to be cut: Stainless steel (INOX), steel
- Inner hole ø (mm): 22.23
- Cutting off sheet metal, profiles and solid material
Multiple variants
File half-round, 200 mm
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass
84 030 26
Cup brush Pferd TBU individual filament type, Ø 50 mm, shank-Ø 6 mm, steel wire Ø 0.30 mm,
Immediately available
- For steel, cast steel, cast iron, wood, thermoplastic, thermoset, elastomers
- Suitable for roughening, deburring, paint stripping, removal of rust and oxide layers, cleaning
84 018 28
Cutting disc PFERD Ø 125 x 1.0 x 22.23 mm, straight for aluminium, stone, concrete, tiles
Immediately available
- Material to be cut: Aluminium, titanium, other non-ferrous metals, stone, concrete, tiles, thermosets, fibre-reinforced plastics, thermosets (GRP, CFRP), cast iron
- Inner hole ø (mm): 22.23
- Cutting edge: closed
Multiple variants
File half-round pointed, 200 mm
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass
Multiple variants
Round brush, steel wire RBG
Immediately available
- Steel, cast steel, cast iron
- Suitable for deburring, paint stripping, removal of rust, descaling, fillet seam machining, removal of oxide layers, cleaning, weld seam machining, root seam machining
84 030 33
Round brush, Ø 100 mm, shank-Ø 6 mm, plastic Ø 1.10, grit 180
Immediately available
- For steel, cast steel, stainless steel, aluminium, cast iron, bronze, wood, thermoplastic
- Suitable for roughening, deburring, cleaning
Multiple variants
File round PFERD, 200 mm
Immediately available
- For machining edges, deburring, smoothing, sharpening, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass
84 031 06
File set Pferd, 3-piece, 200 mm
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass, wood
- Consisting of:
- File rasp cut 1/1 coarse
- Half-round file H 1 coarse
- Flat blunt file cross cut 1 / single cut 2
Multiple variants
Diamond cutting disc DS PSF
Immediately available
- Material to be cut: Concrete, aerated concrete, pumice stone, brick, soft clinker, sand-lime brick
- Cutting edge: Laser-welded diamond segments
- Inner hole ø: 22.23 mm
Multiple variants
Slatted grinding disc Polifan Z PSF, cranked
Immediately available
- Material to be ground: Stainless steel (INOX), steel
- Inner hole ø (mm): 22.23
- For processing surface grinding, weld seams, chamfering, Deburrer
84 018 17
Grinding disc PFERD Ø 230 x 7.2 x 22.23 mm for steel
Immediately available
- Material to be cut: Stainless steel (INOX) and steel
- Inner hole ø (mm): 22.23
- For processing surface grinding, weld seams, fillet welds, gouging, chamfering, Deburrer
84 030 86
File set, Pferd, 5-piece, 200 mm, H3, in roll bag
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass
- Consisting of:
- Flat blunt file cut 3 fine
- Triangular file cut 3 fine
- Square file cut 3 fine
- Half-round file pointed cut 3 fine
- Round file cut 3 fine
84 030 83
File and rasp set, Pferd, 5-piece, 200 mm, in roll bag
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, wood
- Consisting of:
- Flat blunt file cut 1 coarse
- Square file cut 1 coarse
- Half-round file pointed Cut 1 coarse
- Round file cut 1 coarse
- Half-round rasp cut 2 medium
Multiple variants
Platzhalter
Immediately available
- For machining edges, chamfering, deburring, smoothing, rounding, surface machining
- For steel, cast steel, aluminium, copper, bronze, zinc, brass
Multiple variants
Slatted grinding disc Polifan A-Cool SG, Ø 125 x 22.23 mm, cranked
Immediately available
- Material to be ground: Stainless steel (INOX), aluminium, other non-ferrous metals
- Inner hole ø (mm): 22.23
- For processing surface grinding, weld seams, chamfering, Deburrer
84 030 58
Rundbürste Pferd RBG, 125 x 12 x 22,2, Edelstahldraht 0,50
Immediately available
- For stainless steel, aluminium, bronze, titanium
- Suitable for deburring, paint stripping, removal of rust, descaling, fillet seam machining, removal of oxide layers, cleaning, weld seam machining, root seam machining, removal of tarnish
84 030 31
Round brush, Ø 100 mm, shank-Ø 6 mm, steel wire Ø 0.30
Immediately available
- For steel, cast steel, cast iron, wood, thermoplastic, thermoset, elastomers
- Suitable for roughening, deburring, paint stripping, removal of rust and oxide layers, cleaning
84 030 28
Cup brush Pferd TBU individual filament type, Ø 50 mm, shank-Ø 6 mm, brass wire Ø 0.20 mm,
Immediately available
Multiple variants
Cutting discs PSF, X-LOCK, straight
Immediately available
- Material to be cut: Stainless steel (INOX), steel
- Mounting: X-LOCK and inner hole ø (mm): 22.23
- Cutting off sheet metal, profiles and solid material