PIUSI®
- For heating oil, diesel, lubricants/oil
- By the metre
- Nominal pressure: max. 10 bar
- For heating oil, diesel, rapeseed oil, lubricant/oil
- Sold by the metre
- Size: DN 25 (1”)
- For heating oil/diesel
- Viscosity: medium/high
- Pump type: Self-priming vane pump, with bypass valve
- For heating oil, diesel
- External thread on both sides DN 25 (1”)
- For heating oil/diesel
- Viscosity: medium/high
- Pump type: Vane pump, self-priming with bypass valve
- For diesel and lubricating oil
- Integrated suction filter
- Litre gauge K33
- Suitable for continuous operation, with overheat protection
- Transfer pump for dispensers and stationary transfer stations, with sintered steel rotor and vanes made from acetal resin
- For heating oil/diesel
- For AdBlue®
- Connection: DN 25 (1”)
- For hose ø 3/4”
- Consisting of:
1 x heating oil feed pump set - For heating oil/diesel
- Pump type: Self-priming vane pump, with bypass valve
- For hoses and nozzles
- Material: Galvanised steel
- Heating oil/diesel dispenser for transferring medium/high viscosity lubricants/oils
For fixing to the wall, tank or a stand (not supplied) - Litre gauge with 3-digit mechanical display and resettable partial display
- Fastening to the wall, tank or on a stand (not included in the scope of delivery)
- For heating oil, diesel, biodiesel RME, rapeseed oil, lubricant/oil
- External thread on both sides DN 25 (1”)
- Internal ø: 25 mm
- Heating oil/diesel dispenser for transferring medium/high viscosity lubricants/oils
- Fastening to the wall, tank or on a stand (not included in the scope of delivery)
- Litre gauge with mechanical display, 3-digit with resettable partial display Tank station Electric Cube 70
- Specially designed for use with AdBlue® urea solution . Thanks to the
Non-return valves, this hose allows an undisturbed flow of the urea solution
urea solution, but at the same time prevents the solution from flowing back
back into the tank. - For AdBlue®, water
- Suitable for IBC containers with connection thread S60 x 6 IG, coarse thread
- Centrifugal pump unit for pumping diesel, antifreeze and water
- For heating oil, diesel, water, antifreeze
- Viscosity: low
- For AdBlue®
- Connection: DN 25 (1”)
- For hose ø 3/4”
- A variety of high-performance oils are used in car workshops. They lubricate, keep
machine parts moving, protect against moisture and contamination thereby reducing mechanical
wear. - The P3.5:1 air-operated oil pumps are specially designed for dispensing medium viscosity oils at short to medium distances
- For lubricant/oil
- Electric diaphragm pump in DC version
- For AdBlue®, antifreeze, water
- Viscosity: low
- For AdBlue®, antifreeze, water
- Viscosity: low
- Flow rate: max. 80 l/min
- Predetermined breaking point at the outlet guarantees safety
- If a vehicle accidentally drives off with the valve in the tank, the nozzle will break off from the housing.
- This system accelerates the repair, as only a new nozzle needs to be screwed onto the valve
- For heating oil, diesel, lubricant/oil
- External thread on both sides DN 25 (1”)
- Internal ø: 25 mm
- A variety of high-performance oils are used in car workshops. They lubricate, keep machine parts moving, protect against moisture and contamination thereby reducing mechanical wear.
- The P5.5:1 air-operated oil pumps are specially designed for dispensing medium viscosity oils at short to medium distances.
- For lubricant/oil
- For AdBlue®
- Connection: DN 25 (1”)
- For hose ø 3/4”
- The MP compressed air diaphragm pumps are designed for the greatest reliability and the highest performance
- They are suitable for installation in liquid
- The compressed air circuit guarantees safe operation, with the design concept of the MA pumps meeting the requirements of critical applications and/or in potentially explosive environments (ATEX certification for zone 2)