REGALWERK
- GS safety certified
- Material: Galvanised sheet steel
- Shelf with 5 levels of bulk goods sets
- Material: galvanised sheet steel
- With 40 mm pipe edge and system holes
- 4 shelf supports
- Freely adjustable
- Galvanised
- Height: 200 mm
- Additional shelves with 5 levels
- GS safety certified
- Material: Galvanised sheet steel
- GS safety certified
- Meets the standards according to BGR 234 and DIN EN 15635
- If the shelf height is more than four times the shelf depth, the shelves must be secured against tipping. e.g. by wall mounting or floor anchors.
- Frame material: Cold-rolled steel strip
- Worktop material: Multiplex beech, 30 mm thick - Bracing through linear ridge
- Dimensions specified are outside dimensions
- Shelf dimensions (W x D): 1005 x 600 mm - Supplied in parts
- GS safety certified
- Meets the standards according to BGR 234 and DIN EN 15635
- If the shelf height is more than four times the shelf depth, the shelves must be secured against tipping e.g. using wall fixings or floor anchors
- Freely adjustable
- Galvanised
- Height: 200 mm
- Frame material: Cold-rolled steel strip
- Worktop material: Multiplex beech, 30 mm thick - With drawer: Steel, 530 x 150 x 590 mm, gentian blue RAL 5010, lockabe
- Bracing through linear ridge
- Dimensions specified are outside dimensions
- Shelf dimensions (W x D): 1005 x 600 mm
- Suitable for KARL cantilever racks
- Made of hot-rolled steel, IPE profiles, industrial paint RAL 5010 blue
- System perforation: 100 mm, for free arrangement of cantilever arms
- GS safety certified
- Meets the standards according to BGR 234 and DIN EN 15635
- If the shelf height is more than four times the shelf depth, the shelves must be secured against tipping. e.g. by wall mounting or floor anchors
- GS safety certified
- If the shelf height is more than four times the shelf depth, the shelves must be secured against tipping. e.g. by wall mounting or floor anchors.
- Tier joists as support beams (pair)
- Suitable for all ARTUS pallet racks except 81 011 61 & 81 014 51
- Made of cold-rolled steel strip, profiled, powder-coated RAL 7001, silver grey
- Depth: 1100 mm
- GS safety certified
- If the shelf height is more than four times the shelf depth, the shelves must be secured against tipping. e.g. by wall mounting or floor anchors.
- Tier joists as support beams (pair)
- Material: galvanised sheet steel
- Suitable for all BERT shelving systems
- T-profile made from cold-rolled steel strip
- High-quality material grade (t= 1.2 mm)
- Suitable for all BERT shelving systems
- Replaces the bracing with cross diagonal braces
- For use with wheel and tyre racks and for holding wooden shelves
- Material: steel
- Colour: RAL 2004, pure orange
- Suitable for all BERT shelving systems
- For Shelf units that can be operated from both sides as shelf support and shelf bracing
- Galvanised version, pluggable with 3 hook lugs
- GS safety certified
- 3 shelf levels with longitudinal bars and precisely fitting chipboard shelf 25 mm
- Store up to 9 beverage crates in just 0.3 m²
- GS safety certified
- The ideal solution for storing folders, catalogues and office materials
- Height (mm): 2000
- GS safety certified
- The ideal solution for storing folders, catalogues and office materials
- Height (mm): 2000
- For lateral fall safety for people when people are moving, the external shelf frame must be 500 mm higher than the top support beam
- Consisting of 1 add-on shelf with 2 levels
- Bay load with a shelf load of min. 1000 mm (see table)
- For lateral fall safety for people when people are moving, the external shelf frame must be 500 mm higher than the top support beam
- Consisting of 1 base shelf with 2 levels
- Bay load with a shelf load of min. 1000 mm (see table)