Reilang
- For heating oil, mineral, synthetic and biological oils
- Double action
- Jacket pipe made of aluminium
- For mineral oil-based lubricants and release agents, formwork oils
- Container made of polyethylene (PE) with fill scale
- Special pump station
- Material: polypropylene
- Made of steel, galvanised
- DIN 71412
Content:
Qty. Form Size
10 H1 M6 x 1.0
10 H1 M8 x 1.0
20 H1 M10 x 1.0
20 H1 DN 6 (1/8”)
10 H1 DN 8 (1/4”)
5 H2 M8 x 1.0
5 H2 M10 x 1.0
5 H2 DN6 (1/8”)
5 H2 DN8 (1/4”)
5 H3 M8 x 1.0
5 H3 M10 x 1.0
5 H3 DN6 (1/8”)
5 H3 DN8 (1/4”)
10 D1a 6.0 mm
10 D1a 8.0 mm
- For heating oil, mineral, synthetic and biological oils, white spirit, coolant, anti-freeze, methylated spirit, petroleum, brake fluid
- Double action
- Jacket pipe made of aluminium
- Material: Polyethylene (PE)
- Filling ø: 200 mm
- Outlet ø: 30 mm
- Material: Polyethylene (PE)
- For fuel oil, thick oils, wheel flange medium and cooling water
- Deep spout base
- Material: Polyethylene (PE)
- Made of steel, galvanised, DIN 71412
- For screwing in
- PU = 10 units
- For anti-freeze, coolant, white spirit or oil
- Medium is sucked in and expelled through the same opening
- Aluminium pipe: DIN 3.3206
- For water
- Depressurised delivery
- Viscosity: low
- Suitable for: Oil, petrol, spirit, alcohol, disinfectants
- Material: brass
- Seal: NBR
- Food-safe and suitable for laboratory use
- Material: Polyethylene (PE)
- Drip nozzles are suitable for thin and highly viscous liquids, which have to be dosed drop by drop by squeezing the bottle.
Since there is no tube the bottle can only
be used unside down.
- Material: Polyethylene (PE)
- Colour: white
- For heating oil and diesel, petrol, hydraulic fluid, engine oil, linseed oil
- Viscosity: low/medium
- Pump type: Piston pump
- For chemicals, solvents and cleaning agents and formwork oils, oils
- Container made of polyethylene (PE) with fill scale
- Special pump station
- Food-safe and suitable for laboratory use
- Material: Low density polyethylene (LDPE)
- The spray tube inside the bottle reaches to the bottom. When the bottle is squeezed, liquid in the bottle is then transported through the spray tube in a normal position. Perfect for low-viscosity, water-like media, e.g. for filling car batteries, laboratory, disinfection, oil, cleaning agents.
- For water, heating and diesel oil, hydraulic fluid
- Viscosity: Low/medium
- Pump type: Piston pump
- For fuel oil, thick oils, wheel flange medium and cooling water
- Deep spout base
- Material: Polyethylene (PE)
- Viewing window on the Cartridges to be used
- Mix-ups are ruled out
- Ideal in the food sector or wherever it is very important that the correct Grease is used
- Container made of polyethylene (PE)
- Brass pumping mechanism
- One main and one head pump for overhead use
- For heating oil, mineral, synthetic and biological oils, coolant, anti-freeze, petroleum, brake fluid and much more.
- For filling and removal
- Jacket pipe: transparent hard PVC with scale
- Container made of aluminium
- Brass pumping mechanism
- Stroke volume: 1.5 ml