REMKO
- Enamelled hot water tank with 300 litre capacity
- Quiet operation due to rotary piston compressor
- Electric auxiliary heater 1.5 kW
- Drinking water preparation- Separate cooling circuit- With flat-sealing external thread ...
- Speed-controlled circulation pump 7.5 m with PWM control- 3-way mixer with mixer motor- Mixer motor 3-point 230 V, running time: 120 s- Connection: DN 40 (1 1/2") AG- Centre distance: 125 mm ...
- To prevent frost damage- Installation in the flow pipe outdoors- With flat-sealing external thread DN 32 (1 1/4") ...
- Speed-controlled circulation pump 7.5 m with PWM control- Connection: DN 40 (1 1/2") AG- Centre distance: 125 mm ...
- High flow temperatures up to 65 °C
- Effective Heaters, DHW heating and active cooling possible
- Integrated solar control
- Enamelled hot water tank with 300 litre capacity
- Quiet operation due to rotary piston compressor
- Electric auxiliary heater 1.5 kW
- Digital room thermostat for controlling the heat pump in heating/cooling mode.- With touch display for setting the room setpoint temperature- Operating mode setting- Presence detection- Switching on/off- Communication via ModBus ...
- Digital display of temperature and timer
- With infrared remote control
- Programmable 24-hour timer function
- LWM 110 Duo: Cascade connection with 2x LWM 110 Heat pumps
- LWM 150 Duo: Cascade connection with 2x LWM 150 Heat pumps
- High flow temperatures up to 65 °C
- Outdoor unit:
- For Heating and cooling operation
- Eligible for subsidies according to BEG
- For integrating a solar thermal system ...
- Temperature-controlled heating element for safe drainage of defrost water at outside temperatures in the freezing range ...
- Storage tank sensor- Buffer sensor- Reference sensor solar buffer tank ...
- To secure the minimum volume flow ...
- Connection cables between outdoor and indoor module
- By the metre
- Suitable for
- Size 1/4" - 1/2" Series WKF 80
- Size 3/8" - 5/8" Series WKF 100 - 130 (DUO) and HTS 80 - 260
- Size 3/8"" - 3/4" Series WKF 170 (DUO)
- Commissioning with programming and instruction of the LWM monobloc heat pump by the factory service department ...
- Commissioning by the Remko customer service centre for Germany- For WKF 80, 100, 130, 170, HTS 90, 130 ...
- Factory-fitted electric heating element with 9 kW
- Monoenergetic operation for:
- Emergency operation
- Legionella heating
- Screed function
Note: One heating element per Heat pumps! No combination with Smart BVT possible!
- For active cooling- Factory-fitted vapour diffusion-tight insulation on pipework and circulation pump in the indoor unit- To prevent condensation during cooling operation ...
- Factory-fitted electric heating element with 7.5 kW
- Monoenergetic operation for:
- Emergency operation
- Legionella heating
- Screed function
Note: One heating element per Heat pumps!
- Made of reinforced rubber- Suitable for WKF series- PU: 2 pieces ...
- Outdoor unit:
- For Heating and cooling operation
- Eligible for subsidies according to BEG
- For external integration of a second HE with a higher heat output
- Operating voltage Changeover valves: 230 V
- Consisting of:
- 3-way Changeover valves
- Overflow valve DN 25 (1")