RIDGID
- Gases detected*: Methane, hydrogen, propane, ethylene, ethane, hexane, iso-butane, benzene, iso-butane, ethanol, acetaldehyde, toluene, P-xylene, methane, ammonia, hydrogen sulphide
- Detection range: 0-6400 ppm
- Alarm sensitivity: 40 ppm
- - Driven by a standard drill or cordless screwdriver with slip clutch
- The chain centrifuges expand and clean the pipe completely up to the inner pipe wall
- Parallel camera inspection possible - pipe inspection with simultaneous cleaning
- Nylon coating for less dirt adhesion and easy cleaning of the spiral
- Suitable for blockages caused by grease, hair, limescale and urine scale deposits, wet wipes and small roots - For ø 32 to 50 mm cables up to 15.2 m in length
- Coil ø with/without sheath: 9.5 / 6 mm
- For 3/4" (20 mm) to 2 1/2" (75 mm) cables
- Rpm (min-1): 0-600
- For cleaning small pipes, unblocked WC, sink, urinal and Bathtubs/shower drains
- Cleans lines up to 1 1/2" (ø 40 mm)
- With dual drive option, quick change between machine drive and manual operation
- Can be used with any drill/cordless screwdriver up to 500 rpm
- Display type / size (inch): LCD / 2.7
- Display resolution (pixels): 320 x 240
- Lighting: 4 LEDs with adjustable brightness
- Type C15/22: for cutting 15 and 22 mm copper tube with the unique "quick size change".
- Type C28: for cutting 28 mm copper tube
- Snap connection for quick attachment to the pipe, without size adjustment
- For 3/4" (20 mm) to 1 1/2" (40 mm) pipes up to 9 m
- AUTOFEED® 2-way spiral feed, keeps your hands clean, the spiral is not touched when advancing and retracting
- Spiral with inner core
- Small enough for use in confined areas yet powerful enough to remove stubborn blockages
- Ideal for roof ventilators, the rear handle allows easy transport over Ladders and onto roofs
- Special user-friendly, immediately gripping spiral clutch optimises operation
- Efficiently cleans all closed circuits
- High-performance flow reversal valve for removing limescale deposits from two directions
- - Perfect for descaling boilers, heat exchangers and closed heating systems
- For 1 1/4" (32 mm) to 6" (150 mm) pipes
- Pulse function: Activate the pulse function to overcome difficult bends and Traps
- Portable: The heavy-duty wheeled chassis makes it particularly easy to roll the Pressure washer to the job site
- Power: 1020 W
- Size: DN 6-32 (1/8" - 1 1/4")
- Gearbox housing: Injection-moulded aluminium
- High-quality cutting edge made of M42 high-speed steel
- Patented interlocking design
- Cutting depth: 49 mm
- For copper, aluminium, brass and plastic pipes with small diameters
- Grooved rollers for cuts close to flaring
- Sturdy, lightweight slide and wheel housing, large knurled screw knob for easy control of cutting pressure for clean cuts
- Spiral ø x length: 7 mm x 9 m
- For 32 mm to 110 mm lines
- Automatic spiral feed (AUTOFEED®)
- For use with a 3/8" (10 mm) or 1/2" (12 mm) spiral with inner core and integral wrap (IW), which is robust and kink-resistant
- Driven by a standard drill or cordless screwdriver with slip clutch- The chain centrifuges expand and clean the pipe completely up to the inner pipe wall- Parallel camera inspection possible - pipe inspection with simultaneous cleaning- Nylon coating for less dirt adhesion and easy cleaning of the ...
- For all common press fitting systems: ø 12-108 mm
- Can be operated with 18 V battery as an option
- Piston force 32 kN
- Protection class: IP54
- Range in rooms: up to 30 m
- Laser type: Class 2, 630-670 nm
With fully floating, movable forged hook jaw with self-cleaning thread and interchangeable supporting and hook jaws ...
- For toilet pipe adapters and bath, washbasin and sink strainers up to 2”
- For fitting or removing 1” to 2” nipples
- The jaws expand eccentrically and can be set to various sizes by rotating them
- Measuring Room air quality, air conditioning, ventilation and storage conditions is now done at the touch of a button
- Display: 4 1/2" dual LCD with backlighting
- Measurements: Humidity, Temperature, Dew point, Evaporation temperature
With fully floating, movable forged hook jaw with self-cleaning thread and interchangeable supporting and hook jaws ...
- For cutting threaded rods used for ceiling mounting of ducts for air conditioning and sprinkler systems and other light frames
- Cuts cleanly without damaging the thread
- With 8 mm jaws