RunpoTec
Multiple variants
Cable retraction system Runpo 5
Immediately available
- Tapes ø: 5.3 mm
- Tape material: 3-fold twisted special plastic with 2 x RUNPOGLEITER incl. twist compensation at the start and end of the spiral for optimum bending and sliding behaviour
- Bending radius min.: 15 mm
62 169 58
RunpoTec inspection camera RC3 (digital) - 15 m incl. 1 x threaded attachment RC2/RC3, glass fibre rod Ø 3 mm - 1 m, micro memory card
Currently not in stock - Time of delivery: approx. 2-4 weeks
- For pipe inspection up to 15 m
- Pipe inspection from inner ø 14 mm
- Inspection of ventilation pipes, drainage pipes, sewage pipes, etc.
62 171 66
Inspection camera + cable feeder RunpoTec - Set 11150; RC3 camera for pipe inspection up to 15m + GF3 - 30m
Immediately available
- Consisting of:
1 x inspection camera RC3 - For inspecting cable, Ventilation and waste water pipes from inner ø 14 mm
- Preservation of evidence, image archiving, documentation of images
62 019 48
Connecting rods RUNPOSTICKS Comfort, Set - 19 pieces
Immediately available
- Push rods made of basalt, making the most extreme bending radii possible. Nevertheless, the rods remain inherently stable. No Grates - due to stainless steel thread ø 6 mm, no impact edges
- With stainless steel sliding hook, overcomes obstacles of up to 80 mm
- Scope of delivery:
- 2 x push rod yellow/soft ø 4.5 mm x 1 m
- 3 x push rod black/medium ø 5.5 mm x 1 m
- 5 x push rod red/hard ø 6 mm, 7.5 mm x 1 m
- 1 x stainless steel sliding hook, thread ø 6 mm
- 1 x LED lamp, thread ø 6 mm
- 1 each of catch hook, RUNPOGLEITER, magnet, ball chain, eyelet with Ring, connecting thread ø 6 mm
- Transport bag
Multiple variants
Cable pulling band Runpo1
Immediately available
- Rod ø: 4 mm
- Max. tensile load: 170 kg
- Spiral end: Eyelet head ø 6 mm, thread ø: 6 mm
Multiple variants
Cable pulling band Runpogleiter
Immediately available
- Rod ø: 4 mm
- Max. tensile load: 170 kg
- Spiral end: Eyelet head ø 6 mm, thread ø: 6 mm
62 033 22
Cable drum unwinder RUNPOTEC X-Board XB500 Ø 500mm up to 800kg unwinder
Immediately available
- For cables and cable drums, ducts, ropes even with very small core ø
- Material: plastic
- Load capacity: 800 kg
Multiple variants
Cable reel Cable Box CB260
Immediately available
- For horizontal or vertical unwinding, suitable for all single core installation work, control and telephone cables, switch cabinet assembly.
- Stackable, fixable, with carrying handle
- Impact-resistant housing, suitable for construction sites
62 133 60
Cable retraction device RUNPOTEC Standard Set, glass fibre rod 60m Ø 4.5 mm
Immediately available
- Glass fibre rod with stainless steel end sleeve
- Thread ø: 6 mm
- Length: 60 m
- ø: 435 mm - Tensile load: 220 kg
- For pipes ø: 30-80 mm
62 133 65
Connecting rods RUNPOSTICKS Comfort + RUNPOFIX set, threaded
Immediately available
- Runposticks Set Comfort, 19 pieces
- Push rods made of basalt, making the most extreme bending radii possible. Nevertheless, the rods remain inherently stable
- No Grates - thanks to stainless steel thread ø 6 mm, no butt edges
62 059 36
RunpoTec drawbar eye set 3 pieces, for glass fibre rod Ø= 3mm, thread Ø= 6mm
Currently not in stock - Time of delivery: approx. 4-5 weeks
- Suitable for Power Rex
- Glass fibre rod ø: 3 mm
- Connection thread ø: 6 mm
62 033 23
Cable drum unwinder RUNPOTEC X-Board XB300 Ø 300mm up to 300kg unwinder
Immediately available
- For cables and cable drums, even with very small core ø
- Material: plastic
- Load capacity: 300 kg
62 133 67
Repair set for fibreglass rod ø 4.5 mm
Immediately available
- For glass fibre rod ø 4.5 mm
- Connection thread ø: 6 mm
- Scope of delivery:
- 1 x special adhesive, 3 g
- 2 x end sleeve RTG ø 4.5 mm
- 1 x connecting sleeve
62 040 96
RUNPOTEC RT 2008 cable puller
Immediately available
- Mechanical cable pulling tool for pipes 16-32 mm
- Only for use with RUNPOGLEITER MET spiral (order no.: 62 019 74 to 62 019 76)
- From lengths of 20 m, support from a cordless Drilling machines is recommended
62 171 65
Inspection camera + push rods RunpoTec - Set 11149; RC3 camera for pipe inspection up to 15m + RUNPOSTICKS Comfort
Currently not in stock - Time of delivery: approx. 2-4 weeks
- Consisting of:
1 x inspection camera RC3 - For inspecting cable, Ventilation and waste water pipes from inner ø 14 mm
- Preservation of evidence, image archiving, documentation of images
62 133 64
RUNPOFIX with hook set
Only a few items left in stock
- Cable pulling loop with protective cap
- Ropes made of stainless steel, ø: 1.5 mm
- Protective cap material: special plastic
62 059 37
RunpoTec special adhesive 3g
Immediately available
- For repairing glass fibre rods
- Dries within 10 min.
Multiple variants
Cable pulling tool RP5 incl. digital metre counter, 30 m
Only a few items left in stock
- Cable pulling tool - for Pipe ø 16-40 mm (optimum)
- Integrated digital metre counter
- 270 kg total breaking load
62 153 18
Guide tip with kink protection set GF3, for glass fibre rod Ø 3 mm, 5-piece
Currently not in stock
- Suitable for GF3 glass fibre rods: ø 3 mm
- With twist compensation and kink protection
- Material: stainless steel
62 171 68
Cable guide clips for Cable Box CB 260 RunpoTec - hinged - Accesories for Cable Box CB 260
Immediately available
- For controlled unwinding of the cables in Cable Box260
- ø opening: 25 mm
- Dimensions (L x W x H) mm: 55 x 7 x 64
Multiple variants
Runpo glider with swirl compensation
Delivery item
- Special eyelet head can accommodate up to 7 x 2.5 mm²
- Connection thread ø: 6 mm
- Dimensions (L x ø): 100 x 7 mm
Multiple variants
Cable retraction system GF3 with meter counter
Immediately available
- Glass fibre rod: ø 3 mm
- Bending radius: 38 mm
- Breaking load: 130 kg
Multiple variants
Cable drum unwinder RUNPOTEC Pro
Immediately available
- Material: aluminium die-cast/continuous cast
- Support roller with spring core axes, with spacing adjustment 85, 160, 225, 290, 310 and 335
- For various cable drum sizes
Multiple variants
Cable retraction system Professional set for pipe ø: 50-250 mm
Delivery item
- Glass fibre rod with stainless steel end sleeve Thread ø: 12 mm
- Tensile load: 330 kg
- Steel reel ø 730 mm (galvanised/powder-coated) with double run-out system (automatic run-out brake and quick run-out), additional fixing brake