• Size: DN 15 (1/2”)
  
• Max. operating pressure: 10 bar
  
• Max. operating temperature: 130°C
  

• Size: DN 15 (1/2”)
  
• Max. operating pressure: 10 bar
  
• Max. operating temperature: 130°C
  

• DN 20 (3/4") Eurocone
  
• Material: Brass
  
• Nickel-plated union nut
  

• DN 20 (3/4") Eurocone
  
• Material: Brass
  
• Nickel-plated union nut
  

• Made from plastic
  
• With quick strap fastening made of heat-resistant polyamide
  
• Vertical and horizontal positioning
  

• Self-adhesive PVC film
  
• Colours according to DIN 2404
  
• 78 mm wide
  

• For connection to external room temperature controllers
  
• For room temperature-dependent control of surface heating systems with return temperature limitation using integrated fixed value limit switches (40°C)
  
• Pre-mounted and pre-wired actuator and RTL sensor
  Consisting of:
  

• Connections: External thread x union nut (internal thread)
  
• External thread self-sealing with thread cutting seal
  
• Conical sealing

• Self-sealing
  
• Suitable for Simplex connection fittings
  
• Brass, bare
  

• For room temperature-dependent control of surface heating systems
  Consisting of:
  
• Flush-mounted wall box
  
• Valve block with DN 20 (¾”) connection (Eurocone) and venting
  

• Size: DN 15 (1/2”)
  
• Max. operating pressure: 10 bar
  
• Max. operating temperature: 180°C
  

• For cross-free connection with reversed flow and return flow pipe
  
• For radiators with DN 20 (¾”) external thread (Eurocone)
  
• With conical part
  

• For steel pipes to DIN EN 10255 of standard connection types
  
• Can also be used for drinking water
  
• High durability due to compression fitting
  

• Suitable for corner or straight-through installation
  
• Convertible for right or left-sided connection
  
• Integrated filling and drain valve for Hose screw connections
  

Robust plastic hollow-chamber profile with soft wall-sealing lip, white/grey skirting board with protective film, PVC decorative trims with bonded decorative foil. ...

• DN 20 (3/4") Eurocone
  
• Material: Brass
  
• Nickel-plated union nut
  

• For hot water heating systems and solar systems. With full opening and extended handle for insulation, in accordance with the Heat Protection Ordinance. The hollow spindle design offers an option of a thermometer or butterfly handle.
  Technical data:
  
• Operating pressure: max. 10 bar
  
• Operating temperature: 110°C (130°C for short periods)
  

• Light, punched design with flat seal EPDM 2.5
  
• White coated, similar to RAL 9016, with special flat seal

• Room temperature-dependent feedback control for individual room with limit on the flow temperature
  
• For subsequent installation of wall and floor heating systems
  
• Operates with electrical room temperature controller (not included)
  

• Made of stainless steel 1.4016 (V2A) and heat-resistant plastic
  
• With clamping tape up to DN 50 (2”)
  
• Clear cover for signs 100 x 50 mm
  

• For tap block rough mounting
  
• Fixed centre distance 50 mm
  
• Can be reused
  

• 1x pump flange ball valve with red thermometer handle und check valve
  
• 1x pump flange ball valve with butterfly handle
  
• 1x Return ball valve with blue thermometer handle

• Suitable for Simplex heating circuit sets

• Suitable for corner or straight-through installation
  
• Integrated drain valve
  
• Can be shut off