STABILA®
- Material: aluminium
- Measuring surfaces: 1 x coated
- Type of vial: 1 x horizontal, 1 x vertical
- Material: aluminium rectangle
- Measuring surfaces: 1 x coated
- Type of vial: 1 x horizontal, 1 x vertical
- Material: aluminium
- Measuring surfaces: 2 x coated
- Type of vial: 1 x horizontal, 1 x vertical
- Material: aluminium
- Tripod legs with rubber caps
- Working range: 550-1400 mm
- Material: aluminium
- All standard installation dimensions printed on
- Notches for gauge block transfer
- Material: aluminium
- Protection class: IP 54
- Measuring surfaces: 2 x
- Profile: Extra-rigid rectangular aluminium profile with reinforcement ribs
- Measurement areas: 2 x
- Accuracy in normal position: 0.029 ° = 0.5 mm/m
- Material: aluminium
- Thread: 5/8"
- Extendable spirit level with telescopic system and permanently mounted spacers for bridging uneven surfaces
- Measuring surfaces: 1 x
- Type of spirit level: 1 x horizontal, 1 x vertical
- Target plate with magnetic holder and crosshairs for vertical and horizontal alignment of a laser to a target point
- For suspended ceilings, the target plate can be attached to metal rails using the magnetic holder
- Improves the visibility of the laser beam
- Material: aluminium rectangle
- Easy to clean thanks to smooth side surfaces and electrostatic powder coating
- Measuring surfaces: 1 x coated
- Material: aluminium
- Measuring surfaces: 1 x coated
- All common Electric installation dimensions printed on
- GREENBEAM technology stands for razor-sharp 3 x 360° lines with which you can transfer heights, create right angles or align axes- Protection class: IP 65- Laser class: 2- Working range: 40 m- Self-levelling range: approx. ± 4- Levelling accuracy: ± 0.3 mm/m- Power: < 1 mW- Operating time: appr ...
- Material: aluminium
- Measuring surfaces: 2 x Cutter (up to 122 cm)
- Type of vial: 1 x horizontal, 2 x vertical
- Target plate with magnetic holder and crosshairs for vertical and horizontal alignment of a laser to a target point
- For suspended ceilings, the target plate can be attached to metal rails using the magnetic holder
- Improves the visibility of the laser beam
- Profile: Extra-rigid rectangular aluminium profile with reinforcement ribs
- Measurement areas: 2 x
- Accuracy in normal position: 0.029 ° = 0.5 mm/m
- Profile: Extra-stiff aluminium rectangular profile with reinforcing ribs
- Two integrated electronic modules for delay-free measurement of inclinations, slopes and angles
- Acoustic guidance in 3 different signal tones
- Accuracy class II
- Painted yellow steel measuring tape
- Double-sided scale
- Material: Extra-stiff aluminium rectangular profile with reinforcing ribs
- Measuring surfaces: 2 x
- Vial type: 1 x horizontal, 2 x vertical
- Material: aluminium
- Measuring surfaces: 2 x coated
- Type of vial: 1 x horizontal, 1 x vertical
- Volts: 12
- Ah: 2
- Charging time/min.: 46
- Protection class: IP 67- Operating time (h): 50- Four adjustable sensitivity levels for application-oriented work: ± 0.3 mm (very fine), ± 1.0 mm, ± 2.0 mm, ± 5.0 mm (very coarse)- Variable mounting options - holder for mounting on levelling staffs and integrated magnet system- Universal laser ...
- Material: aluminium
- Handrail with finger groove over the full length
- Measuring surfaces: 2 x coated
- Tape width: 13 mm
- Universal hook with SPIKE coating for better grip
- Integrated nail eyelet (quick release)