Stanley Tools

• Material to be cut: all materials
  
• Made of carbon steel
  
• Up to 3x sharper and 15x longer service life compared to standard saw blades

• Material to be cut: wood
  
• Application: fast, accurate sawing for difficult jobs
  
• Ground on three sides
  

• Material to be cut: all types of wood, laminate, plastic pipes, plastic tubes
  
• Ground on three sides, for pulling and pushing
  
• Blade thickness (mm): 0.7
  

• - Material to be cut with coarse tooth pitch: Boards, support beams, shoulder frames, chipboard, green wood, plasterboard, aerated concrete blocks
  - Application with coarse tooth pitch: General construction work, carpentry work, stud frames, beams, bohle, rough cutting
  
• Ground on three sides
  
• Blade thickness (mm): 0.7
  

• - Material to be cut with fine tooth pitch: Parquet, skirting boards, wall panelling, frames, panels, floor coverings, PVC pipes
  - Application with Fine tooth pitch: Frames, wall and ceiling panelling, floor coverings, laminate, parquet, PVC
  
• Ground on three sides, for push and pull
  
• Blade thickness (mm): 1
  

• - Material to be cut with coarse tooth pitch: Boards, support beams, shoulder frames, chipboard, green wood, plasterboard, aerated concrete blocks
  - Application with coarse tooth pitch: General construction work, carpentry work, stud frames, beams, bohle, rough cutting
  
• Ground on three sides
  
• Blade thickness (mm): 0.85
  

• - Material to be cut with fine tooth pitch: Parquet, skirting boards, wall panelling, frames, panels, floor coverings, PVC pipes
  - Application with Fine tooth pitch: Frames, wall and ceiling panelling, floor coverings, laminate, parquet, PVC
  
• Ground on three sides
  
• Blade thickness (mm): 0.7
  

• - Material to be cut with fine tooth pitch: Parquet, skirting boards, wall panelling, frames, panels, floor coverings, PVC pipes
  - Application with Fine tooth pitch: Frames, wall and ceiling panelling, floor coverings, laminate, parquet, PVC
  
• Ground on three sides
  
• Blade thickness (mm): 0.85
  

- Material to be cut with coarse tooth pitch: Boards, support beams, shoulder frames, chipboard, green wood, plasterboard, aerated concrete blocks- Application with coarse tooth pitch: General construction work, carpentry work, stud frames, beams, bohle, rough cutting- Ground on three sides, for pus ...

• Material to be cut: Wood, soft wood types, end grain, vinyl, plaster mortar, brass, lead, aluminium, copper, ceramic

• Material to be cut: all materials, hard steel
  
• Fully hardened

- Made of hardened steel- Handles: Wood- According to DIN 5139 ...

• Material to be cut: light steel, brass, aluminium, copper

• Material to be cut: Wood, soft types of wood, end grain, vinyl, plaster mortar, brass, lead, aluminium, copper, ceramic
  
• Application: small surfaces, corners
  
• Reversible blade

• - Made of hardened steel
  - Handles: Wood
  - According to DIN 5139
  Consisting of:
  
• Blade width (mm): 6, Length (mm): 125
  
• Blade width (mm): 10, length (mm): 132
  

• Material to be cut: Aerated concrete, aerated concrete
  
• Application: Solid construction
  
• Stop (°): 45, 90
  

• Movable holding cams
  
• Integrated saw stop prevents damage to the drawer
  
• Mitre (°): 22.5, 45, 90

• Adjustable sides, depth, jaw width and Angle
  
• Sole and sides ground
  
• Cutting angle (°): 20

• Material to be cut: plasterboard
  
• Application: Drywall, for figures, patterns and moulds
  
• Blade thickness (mm): 0.7
  

• Material to be cut: all types of wood, laminate, plastic pipes, plastic tubes
  
• Ground on three sides, for pulling and pushing
  
• Blade thickness (mm): 0.7
  

• 1/4" reversible ratchet, length (mm): 90
  
• 1/4" Socket wrench inserts, hexagon socket: SW 6/7/8/10/11/12/13
  
• 1/4" Bit holder with quick-change chuck and magnet, length (mm): 60
  

• Suitable for Plane, Combination Plane and Files
  
• Material to be cut: Wood, soft types of wood, fibreboard, end grain, plywood, vinyl, rubber, plaster mortar, lime, fibreglass, nylon, linoleum, chipboard, plasterboard, polyester boards

• Material to be cut: wood, soft types of wood, end grain, vinyl, plaster mortar, brass, lead, aluminium, copper, ceramic
  
• Can be used as a file or Plane
  
• Handles: Plastic